အနုပညာ
အလှအပနှင့် ကျန်းမာရေး
လက်မှုအနုပညာ
ယဉ်ကျေးမှုနှင့် သမိုင်း
ဖျော်ဖြေရေး
ပတ်ဝန်းကျင်
အစားအစာနှင့် အချိုရည်
စိမ်းလန်းသောအနာဂတ်
ပြောင်းပြန်အင်ဂျင်နီယာပညာ
သိပ္ပံပညာများ
အားကစား
နည်းပညာ
ဝတ်ဆင်နိုင်သောပစ္စည်းများ

Building a Nyckelharpa — The Swedish Keyed Fiddle
Build a nyckelharpa: a bowed Swedish fiddle played not with fingers on a fingerboard but with a row of wooden KEYS whose tangents press the string to each note. It also carries sympathetic strings that ring on their own. A serious maker build in the bowed string, the tangent keyboard and sympathetic resonance.
အလယ်အလတ်
Several hours over several sessions
ညွှန်ကြားချက်များ
1
1
A fiddle with a keyboard
A fiddle with a keyboard
The nyckelharpa is a bowed Swedish fiddle, but instead of pressing the strings with your fingers you press wooden KEYS. Each key drives a little tangent against the string to make a note.
2
2
Build the soundbox
Build the soundbox
Build a long, hollow wooden body with a light soundboard on top. This box amplifies the bowed strings.
Materials for this step:
Baltic Birch Plywood (1/8 inch, 12x12, 10-Pack)1 ခု
Dry Softwood Board1 ခု
PVA Wood Glue1 ခုTools needed:
Hacksaw3
3
Fit the strings
Fit the strings
Stretch a melody string and one or two drone strings along the top, over a bridge, tuned with pegs.
Materials for this step:
Steel Music Wire 0.032"1 ခု
Tuning Pegs4 ခုTools needed:
Awl4
4
Add sympathetic strings
Add sympathetic strings
Under the melody string, run a set of thin strings you never touch — the SYMPATHETIC strings. Tuned to the scale, they ring on their own whenever their note is played, giving the halo of sound.
Materials for this step:
Steel Music Wire 0.032"1 ခု5
5
Build the key-box
Build the key-box
Build a box under the neck holding a row of sliding wooden keys, each carrying a small hardwood tangent.
Materials for this step:
Dowel Rod1 ခုTools needed:
Sloyd Carving Knife6
6
Set the tangents
Set the tangents
Position each key's tangent so that pressing the key from below stops the melody string at the next note of the scale — a keyboard of frets you push up into the string.
7
7
Make the bow
Make the bow
String a short springy stick with horsehair to make a bow, and rub it with pine rosin.
Materials for this step:
Curved Branch (Bow)1 ခု
Bow Hair (Horsehair)1 ခု8
8
Bow and key
Bow and key
Hold the harpa across your body on a strap, bow the strings with one hand, and press the keys with the other. The keys pick out the tune while the drones and sympathetic strings shimmer beneath.
9
9
Compendium — bowing through a keyboard
Compendium — bowing through a keyboard
The nyckelharpa joins two ideas. First it is a bowed instrument: drawing a rosined bow across a string sets it into steady stick-slip vibration, the same Helmholtz motion as the erhu or violin, so the note sings on as long as you bow. Second, it is stopped by a KEYBOARD rather than by fingers: each key carries a tangent, a little hard ridge that pushes against the string to shorten its speaking length to a fixed note, exactly as a fret does — the same mechanism that fingers the melody on a hurdy-gurdy, but here you bow by hand instead of turning a wheel. What gives the nyckelharpa its glittering, cathedral-like tone is a third set of strings, the SYMPATHETIC strings, stretched under the melody string and never touched: each is tuned to a note of the scale, and whenever that note sounds on the bowed string, the matching sympathetic string is shaken into vibration by resonance and rings along on its own, wrapping every note in a soft halo — the same resonance trick used by the Indian sitar and sarangi. Played in Sweden since the Middle Ages and pictured on medieval church walls, the nyckelharpa is a cousin of the hurdy-gurdy (its keyed neighbour) and of the whole bowed-string family.
ပစ္စည်းများ
8- Placeholder
- Placeholder
- 1 ခုPlaceholder
- Placeholder
- 4 ခုPlaceholder
- Placeholder
- Placeholder
You can swap these in
Can't get one of the materials? Swap it for an equivalent — these work just as well.
- Instead of Sloyd Carving Knife, try:
Blunt Collection Knife
Gilder's Knife
Knife
Sharp Cinnamon Knife - Instead of PVA Wood Glue, try:
Polyurethane Glue - Instead of Baltic Birch Plywood (1/8 inch, 12x12, 10-Pack), try:
CDX Softwood Plywood
Fire-Rated Plywood - Instead of Steel Music Wire 0.032", try:
Hook-Up Wire - Assortment (Stranded)
Tie Wire
Thin Brass Wire (for cleaning spouts)
Slip Ring - 6 Wire (2A)
Bezel Wire
ဆက်စပ် အစီအစဉ်များ
ဤအစီအစဉ်များသည် အသိပညာမျှဝေသည် — နည်းပညာ၊ ပစ္စည်း သို့မဟုတ် မူများ
Related blueprints
Other builds that share materials, tools, or techniques with this one.

Building a Morin Khuur — The Mongolian Horse-Head Fiddle

Building a Lyre of Ur — The Sumerian Bull Lyre

Building an Erhu — The Chinese Two-String Bowed Fiddle

Building a Hurdy-Gurdy — The Crank-Powered Wheel Fiddle

Building a Kora — The West African Harp-Lute

Building a Clay Kiln — The First Furnacecraft/ceramics-and-clay
CC0 အများပိုင်
ဤအစီအစဉ်ကို CC0 အောက်တွင် ထုတ်ဝေထားသည်။ ခွင့်ပြုချက်မလိုဘဲ ကူးယူ၊ ပြင်ဆင်၊ ဖြန့်ဝေ နှင့် အသုံးပြုနိုင်သည်။
အစီအစဉ်မှတစ်ဆင့် ကုန်ပစ္စည်းများဝယ်ယူ၍ ဖန်တီးသူကို ပံ့ပိုးပါ ဖန်တီးသူ ကော်မရှင် ရောင်းချသူက သတ်မှတ်သည်၊ သို့မဟုတ် ဤအစီအစဉ်၏ ဗားရှင်းအသစ်ဖန်တီး၍ ဝင်ငွေခွဲဝေရန် သင့်အစီအစဉ်တွင် ချိတ်ဆက်မှုအဖြစ် ထည့်သွင်းပါ။