အနုပညာ
အလှအပနှင့် ကျန်းမာရေး
လက်မှုအနုပညာ
ယဉ်ကျေးမှုနှင့် သမိုင်း
ဖျော်ဖြေရေး
ပတ်ဝန်းကျင်
အစားအစာနှင့် အချိုရည်
ပြောင်းပြန်အင်ဂျင်နီယာပညာ
သိပ္ပံပညာများ
အားကစား
နည်းပညာ
ဝတ်ဆင်နိုင်သောပစ္စည်းများ
Teaspoon Sawn Short from Silver Sheet, Then Hammered Out (Payne 1914)
Arthur F. Payne · Public domain (1914)
Forge

ဖန်တီးသူ

Forge

27. အောက်တိုဘာ 2026NO
၂
၀
၀
၀
၀

Teaspoon Sawn Short from Silver Sheet, Then Hammered Out (Payne 1914)

Saw the spoon out of flat silver smaller than it will end up: shorter, narrower in the bowl and thicker in the shank. Hammering then stretches it to full size. Arthur Payne said this method was used largely for silver teaspoons. Source: A. F. Payne, Art Metalwork with Inexpensive Equipment (1914), pp. 180–184; annealing from his chapter XI. The millimetre figure is ours. Picture: Payne's Fig. 155, the blank and the finished spoon.
အလယ်အလတ်
1 day

ညွှန်ကြားချက်များ

1

Saw out the short blank

Mark out and saw the blank from 15-gauge sterling silver (about 1.45 mm; our conversion): 5 in long, the bowl 1⅛ in wide and the shank 5⁄16 in wide. The finished spoon will be 6 in long with a bowl 1⅝ in wide.

ဤအဆင့်အတွက် ကုန်ကြမ်းများ:

စတာလင်ငွေပါးပြားစတာလင်ငွေပါးပြား1 piece 15 gauge, enough for the 5 in blank

လိုအပ်သော ကိရိယာများ:

မျဉ်းဆွဲတံမျဉ်းဆွဲတံ
ရွှေပန်းထိမ်လွှရွှေပန်းထိမ်လွှ
2

Stretch the bowl wider

Hammer the bowl on a flat anvil with the ball-pein hammer, held at a slight angle towards the side you want it to grow. This makes the bowl thinner and wider.

လိုအပ်သော ကိရိယာများ:

ပန်းပဲခုံပန်းပဲခုံ
လုံးဝိုင်းခေါင်းတူလုံးဝိုင်းခေါင်းတူ
3

Narrow the shank with the neck hammer

Hold the spoon on edge on a rounded convex stake and hammer the shank narrower with the neck hammer. This lengthens the spoon and makes the shank narrower and thicker. Widen the tip of the handle the same way as the bowl.

လိုအပ်သော ကိရိယာများ:

တံသင်တံသင်
လည်ပင်းဆွဲတူလည်ပင်းဆွဲတူ
လုံးဝိုင်းခေါင်းတူလုံးဝိုင်းခေါင်းတူ
4

Anneal and repeat

When the silver gets hard, heat it to a dull red and plunge it into water, or let it cool. Repeat the hammering and annealing until the spoon is roughly to shape.

ဤအဆင့်အတွက် ကုန်ကြမ်းများ:

ရေရေ1 as required

လိုအပ်သော ကိရိယာများ:

ဘွန်ဇင်မီးလောင်ပြွန်ဘွန်ဇင်မီးလောင်ပြွန်
ညှပ်ညှပ်
ဖန်အိုးဖန်အိုး
5

File and planish

File the rough edges smooth, then planish the whole spoon carefully.

လိုအပ်သော ကိရိယာများ:

တံစဉ်း (လက်တံစဉ်း)တံစဉ်း (လက်တံစဉ်း)
ချောမွေ့စေသောတူချောမွေ့စေသောတူ
တံသင်တံသင်
6

Polish out the file marks

Rub out all the scratches and file marks with emery cloth.

လိုအပ်သော ကိရိယာများ:

အဲမရီအထည်အဲမရီအထည်
7

Anneal to even the fire scale

Anneal the spoon thoroughly once more. Heated silver grows a thin white skin, the fire scale, and this brings it back over the spots where filing and polishing took it off, so the colour is even.

ဤအဆင့်အတွက် ကုန်ကြမ်းများ:

ရေရေ1 as required

လိုအပ်သော ကိရိယာများ:

ဘွန်ဇင်မီးလောင်ပြွန်ဘွန်ဇင်မီးလောင်ပြွန်
ညှပ်ညှပ်
ဖန်အိုးဖန်အိုး
8

Planish with smooth hammers

Planish the spoon on smooth tools with smooth, bright hammers. This makes it stiff again after the annealing.

လိုအပ်သော ကိရိယာများ:

ချောမွေ့စေသောတူချောမွေ့စေသောတူ
ပန်းပဲခုံပန်းပဲခုံ
တံသင်တံသင်
9

Final polish with rouge

Polish it lightly with a soft cotton flannel and a little red rouge.

လိုအပ်သော ကိရိယာများ:

ရတနာတိုက်ချွတ်အဝတ်ရတနာတိုက်ချွတ်အဝတ်
ရွှေပန်းထိမ်သည်၏ အနီရောင်တိုက်ဆေးရွှေပန်းထိမ်သည်၏ အနီရောင်တိုက်ဆေး

ပစ္စည်းများ

2
  • 1 piece 15 gauge, enough for the 5 in blank
    နေရာယူပစ္စည်း
  • 2 as required
    နေရာယူပစ္စည်း

လိုအပ်သော ကိရိယာများ

14

ဆက်စပ် အစီအစဉ်များ

ဤအစီအစဉ်များသည် အသိပညာမျှဝေသည် — နည်းပညာ၊ ပစ္စည်း သို့မဟုတ် မူများ

CC0 အများပိုင်

ဤအစီအစဉ်ကို CC0 အောက်တွင် ထုတ်ဝေထားသည်။ ခွင့်ပြုချက်မလိုဘဲ ကူးယူ၊ ပြင်ဆင်၊ ဖြန့်ဝေ နှင့် အသုံးပြုနိုင်သည်။

အစီအစဉ်မှတစ်ဆင့် ကုန်ပစ္စည်းများဝယ်ယူ၍ လက်မှုပညာရှင်ကို ပံ့ပိုးပါ လက်မှုပညာရှင် ကော်မရှင် ရောင်းချသူက သတ်မှတ်သည်၊ သို့မဟုတ် ဤအစီအစဉ်၏ ဗားရှင်းအသစ်ဖန်တီး၍ ဝင်ငွေခွဲဝေရန် သင့်အစီအစဉ်တွင် ချိတ်ဆက်မှုအဖြစ် ထည့်သွင်းပါ။

ဆွေးနွေးချက်

(0)

ဝင်ရောက် ဆွေးနွေးချက်တွင် ပါဝင်ရန်

မှတ်ချက်များ ရယူနေသည်...