အနုပညာ
အလှအပနှင့် ကျန်းမာရေး
လက်မှုအနုပညာ
ယဉ်ကျေးမှုနှင့် သမိုင်း
ဖျော်ဖြေရေး
ပတ်ဝန်းကျင်
အစားအစာနှင့် အချိုရည်
ပြောင်းပြန်အင်ဂျင်နီယာပညာ
သိပ္ပံပညာများ
အားကစား
နည်းပညာ
ဝတ်ဆင်နိုင်သောပစ္စည်းများ
The Forage Harvester: Chopping Green Crop to a Set Length
Karen

ဖန်တီးသူ

Karen

27. စက်တင်ဘာ 2026SE
၈
၀
၀
၀
၀

The Forage Harvester: Chopping Green Crop to a Set Length

Silage is green crop — grass, maize, legumes — packed tight and left to ferment so it keeps through winter. It keeps only if it is chopped short and evenly enough to pack out the air. For decades the crop was cut and carted to a stationary silage cutter at the silo. The field forage harvester does the chopping in the field: it picks up or cuts the crop, feeds it between rollers into a cutterhead of knives, and blows the chop up a spout into a trailer. Sir Charles Ross thought of joining a pick-up to an ensilage cutter and blower powered by an engine riding on the rig; Professor Floyd Duffee improved it; the Fox River Tractor Company tried a mower-type chopper in 1931 and sold a cutter-bar chopper from 1940, and in 1942 Gehl became the first to mass-produce forage harvesters. This rung works out the length of cut, the flywheel's reserve and the spout speed, and builds a paper-strip model that shows the length of cut directly.
အစပြု
About 3 hours

ညွှန်ကြားချက်များ

1

Length of cut, flywheel reserve and spout speed

Jupyter မှတ်စုစာအုပ် ဖွင့်နေသည်…
2

Model the cut with a paper strip

No knives needed. Wind a 50 mm strip of kraft paper onto a spool driven by a geared DC motor, so the strip is pulled past a point at a steady speed — that is the feed rolls. Measure the feed speed with a rule and stopwatch. Screw a plywood arm to the shaft of a second geared motor, with a felt marker at its tip that dabs the paper once a turn as it sweeps past — that is one knife. Measure its speed with the tachometer. Run both and measure the spacing of the dabs: it is $v_f / (z n)$ with $z = 1$. Add a second marker on the opposite end of the arm ($z = 2$) and the spacing halves; slow the feed and it shrinks again. Every setting of a real harvester's length of cut is one of these two changes.

ဤအဆင့်အတွက် ကုန်ကြမ်းများ:

ခရပ်စက္ကူလိပ် (အညို)ခရပ်စက္ကူလိပ် (အညို)1 ခု
ဂီယာပါ DC မော်တာဂီယာပါ DC မော်တာ2 ခု
သစ်သားအလွှာပြားသစ်သားအလွှာပြား1 ခု
စက်မူလီများစက်မူလီများ6 ခု
မပျောက်သော မာကာမပျောက်သော မာကာ2 ခု

လိုအပ်သော ကိရိယာများ:

တိုက်ရိုက်လှိုင်း လျှပ်စစ်ရင်းမြစ်တိုက်ရိုက်လှိုင်း လျှပ်စစ်ရင်းမြစ်
ဒစ်ဂျစ်တယ် လည်ပတ်နှုန်းတိုင်းဒစ်ဂျစ်တယ် လည်ပတ်နှုန်းတိုင်း
အချိန်တိုင်းနာရီအချိန်တိုင်းနာရီ
ပေတံပေတံ
ကြိုးမဲ့ တူးစက်ကြိုးမဲ့ တူးစက်
ကော်ပူသေနတ်ကော်ပူသေနတ်
3

Where a pulled harvester gets its power

A tractor-drawn forage harvester is driven from the tractor's power take-off. The embedded blueprint covers the shaft, its universal joints and its dangers.
4

Chop coming out wrong

Forage harvester problems show in the trailer.

Flow

Loading...
5

History and honest limits

**Sir Charles Ross** proposed joining a pick-up to an ensilage cutter and blower with its own engine; **Professor Floyd Duffee** improved the idea; the **Fox River Tractor Company** built an experimental chopper in 1931 and marketed a cutter-bar chopper from 1940; **Gehl** began mass production in 1942. Self-propelled harvesters with kernel processors now chop whole maize crops. **Honest limits.** The theoretical length of cut assumes the crop is fed straight; in practice it varies. The flywheel figures are a simple solid-disc model. A cutterhead is lethal: it keeps turning long after the drive stops, and blockages must only be cleared with the engine off and the head stationary.

ပစ္စည်းများ

5

လိုအပ်သော ကိရိယာများ

6

CC0 အများပိုင်

ဤအစီအစဉ်ကို CC0 အောက်တွင် ထုတ်ဝေထားသည်။ ခွင့်ပြုချက်မလိုဘဲ ကူးယူ၊ ပြင်ဆင်၊ ဖြန့်ဝေ နှင့် အသုံးပြုနိုင်သည်။

အစီအစဉ်မှတစ်ဆင့် ကုန်ပစ္စည်းများဝယ်ယူ၍ ဖန်တီးသူကို ပံ့ပိုးပါ ဖန်တီးသူ ကော်မရှင် ရောင်းချသူက သတ်မှတ်သည်၊ သို့မဟုတ် ဤအစီအစဉ်၏ ဗားရှင်းအသစ်ဖန်တီး၍ ဝင်ငွေခွဲဝေရန် သင့်အစီအစဉ်တွင် ချိတ်ဆက်မှုအဖြစ် ထည့်သွင်းပါ။

ဆွေးနွေးချက်

(0)

ဝင်ရောက် ဆွေးနွေးချက်တွင် ပါဝင်ရန်

မှတ်ချက်များ ရယူနေသည်...