အနုပညာ
အလှအပနှင့် ကျန်းမာရေး
လက်မှုအနုပညာ
ယဉ်ကျေးမှုနှင့် သမိုင်း
ဖျော်ဖြေရေး
ပတ်ဝန်းကျင်
အစားအစာနှင့် အချိုရည်
ပြောင်းပြန်အင်ဂျင်နီယာပညာ
သိပ္ပံပညာများ
အားကစား
နည်းပညာ
ဝတ်ဆင်နိုင်သောပစ္စည်းများ
Trip-Hammer Helve: an Oak Beam Hewn and Bored for its Pivot
Woody

ဖန်တီးသူ

Woody

17. အောက်တိုဘာ 2026NO
၃
၀
၀
၀
၀

Trip-Hammer Helve: an Oak Beam Hewn and Bored for its Pivot

The helve is the wooden beam of a trip hammer: the head sits on one end, the cams lift the other, and it rocks on a pivot between. Hew it from a straight oak log, bore it for the pivot pin, and taper the head end to fit the hammer's eye. The picture: our diagram, helve with pivot, head and cam.
အလယ်အလတ်
Two days

ညွှန်ကြားချက်များ

1

Choose and cut the log

Pick a straight, knot-free oak log a little longer than the helve and cut it to length.

ဤအဆင့်အတွက် ကုန်ကြမ်းများ:

သစ်မာလုံးများ (ဩက်၊ မေပယ်၊ ဘိချ်)သစ်မာလုံးများ (ဩက်၊ မေပယ်၊ ဘိချ်)1 ခု

လိုအပ်သော ကိရိယာများ:

ပုဆိန်ပုဆိန်
တိုင်းတာရေးတိပ်တိုင်းတာရေးတိပ်
2

Hew it square

Snap chalk lines on the ends and along the log. Score to the lines with the axe and hew the faces flat with axe and adze.

လိုအပ်သော ကိရိယာများ:

မြေဖြူကြိုးမျဉ်းဆွဲကိရိယာမြေဖြူကြိုးမျဉ်းဆွဲကိရိယာ
ပုဆိန်ပုဆိန်
ပေါက်တူးပုဆိန်ပေါက်တူးပုဆိန်
3

Taper the head end

Shave the head end with the drawknife to a slight taper that fits tight into the hammer head's eye.

လိုအပ်သော ကိရိယာများ:

နှစ်ဖက်ကိုင် ခြစ်ဓားနှစ်ဖက်ကိုင် ခြစ်ဓား
သစ်သားတူသစ်သားတူ
4

Bore the pivot

Bore a hole square through the beam for the pivot pin, about a third of the way from the tail.

လိုအပ်သော ကိရိယာများ:

မြေတူးလှည့်ကိရိယာမြေတူးလှည့်ကိရိယာ
တိုင်းတာရေးတိပ်တိုင်းတာရေးတိပ်
5

Lever ratio

Jupyter မှတ်စုစာအုပ် ဖွင့်နေသည်…

ပစ္စည်းများ

1

လိုအပ်သော ကိရိယာများ

7

CC0 အများပိုင်

ဤအစီအစဉ်ကို CC0 အောက်တွင် ထုတ်ဝေထားသည်။ ခွင့်ပြုချက်မလိုဘဲ ကူးယူ၊ ပြင်ဆင်၊ ဖြန့်ဝေ နှင့် အသုံးပြုနိုင်သည်။

အစီအစဉ်မှတစ်ဆင့် ကုန်ပစ္စည်းများဝယ်ယူ၍ လက်မှုပညာရှင်ကို ပံ့ပိုးပါ လက်မှုပညာရှင် ကော်မရှင် ရောင်းချသူက သတ်မှတ်သည်၊ သို့မဟုတ် ဤအစီအစဉ်၏ ဗားရှင်းအသစ်ဖန်တီး၍ ဝင်ငွေခွဲဝေရန် သင့်အစီအစဉ်တွင် ချိတ်ဆက်မှုအဖြစ် ထည့်သွင်းပါ။

ဆွေးနွေးချက်

(0)

ဝင်ရောက် ဆွေးနွေးချက်တွင် ပါဝင်ရန်

မှတ်ချက်များ ရယူနေသည်...