အနုပညာ
အလှအပနှင့် ကျန်းမာရေး
လက်မှုအနုပညာ
ယဉ်ကျေးမှုနှင့် သမိုင်း
ဖျော်ဖြေရေး
ပတ်ဝန်းကျင်
အစားအစာနှင့် အချိုရည်
ပြောင်းပြန်အင်ဂျင်နီယာပညာ
သိပ္ပံပညာများ
အားကစား
နည်းပညာ
ဝတ်ဆင်နိုင်သောပစ္စည်းများ
Tuyere Iron: a Slotted Grate Cast in Grey Iron
Forge

ဖန်တီးသူ

Forge

18. အောက်တိုဘာ 2026NO
၇
၀
၀
၀
၀

Tuyere Iron: a Slotted Grate Cast in Grey Iron

The tuyere is the opening in the bottom of the forge fire through which the blast is blown. Bacon (1919): its openings must let the blast through easily while keeping cinders from dropping into the blast pipe, and there should be a way to open the pipe below and clear out the cinders that still get through. This one is a slotted grate over a socket for the blast pipe, cast in grey iron. The design and sizes are ours. The picture: our drawing.
အဆင့်မြင့်
2 days

ညွှန်ကြားချက်များ

1

Make the pattern

From pine, make a pattern of a square plate about 15 cm across and 2 cm thick with four or five narrow slots, and a short round socket under its centre to take the blast pipe. Taper every side slightly so it draws from the sand.

လိုအပ်သော ကိရိယာများ:

ထင်းရှူးပျဉ်ပြားထင်းရှူးပျဉ်ပြား
အကွေးဖြတ်လွှအကွေးဖြတ်လွှ
သစ်သားဆောက်အစုံသစ်သားဆောက်အစုံ
သစ်သားကော်သစ်သားကော်
ဒစ်ဂျစ်တယ် ကာလီပါ ၆ လက်မဒစ်ဂျစ်တယ် ကာလီပါ ၆ လက်မ
2

Ram the mould

Ram the pattern up in casting sand in the flask, draw it out, and cut a sprue and a runner to the cavity.

လိုအပ်သော ကိရိယာများ:

သွန်းလောင်းရေးသဲသွန်းလောင်းရေးသဲ
သွန်းလောင်းဘောင်သွန်းလောင်းဘောင်
လက်ကိုင်ဂေါ်ပြားငယ်လက်ကိုင်ဂေါ်ပြားငယ်
3

Melt the iron

Melting pig iron in the cupola and tapping it into the ladle.
4

Pour

Pour the molten grey iron from the ladle into the sprue in one steady stream until the mould is full; about 4 kg with the sprue (our estimate). Let it cool in the sand.

ဤအဆင့်အတွက် ကုန်ကြမ်းများ:

သံကြမ်းတုံးများသံကြမ်းတုံးများ4 ကီလို

လိုအပ်သော ကိရိယာများ:

သတ္တုသွန်းယောက်မသတ္တုသွန်းယောက်မ
သွန်းလောင်းဘောင်သွန်းလောင်းဘောင်
ဂဟေဆော်လက်အိတ်ဂဟေဆော်လက်အိတ်
သားရေ ရင်စည်းသားရေ ရင်စည်း
မျက်နှာအကာမျက်နှာအကာ
5

Clean up

Shake out the casting, cut off the sprue, grind the fins and brush off the sand. Check that every slot is clear.

လိုအပ်သော ကိရိယာများ:

ထောင့်ချိုးစက်ထောင့်ချိုးစက်
ဝါယာဘရက်ရှ်အစုံဝါယာဘရက်ရှ်အစုံ
ဂဟေဆော်လက်အိတ်ဂဟေဆော်လက်အိတ်
မျက်နှာအကာမျက်နှာအကာ
6

Set it in the forge

Set it in the hearth with the blast pipe in its socket and a way to open the pipe below for clearing cinders. Richardson's forge had its tuyere iron four inches below the hearth surface.

လိုအပ်သော ကိရိယာများ:

ဒစ်ဂျစ်တယ် ကာလီပါ ၆ လက်မဒစ်ဂျစ်တယ် ကာလီပါ ၆ လက်မ

ပစ္စည်းများ

1

လိုအပ်သော ကိရိယာများ

14

ဆက်စပ် အစီအစဉ်များ

ဤအစီအစဉ်များသည် အသိပညာမျှဝေသည် — နည်းပညာ၊ ပစ္စည်း သို့မဟုတ် မူများ

CC0 အများပိုင်

ဤအစီအစဉ်ကို CC0 အောက်တွင် ထုတ်ဝေထားသည်။ ခွင့်ပြုချက်မလိုဘဲ ကူးယူ၊ ပြင်ဆင်၊ ဖြန့်ဝေ နှင့် အသုံးပြုနိုင်သည်။

အစီအစဉ်မှတစ်ဆင့် ကုန်ပစ္စည်းများဝယ်ယူ၍ လက်မှုပညာရှင်ကို ပံ့ပိုးပါ လက်မှုပညာရှင် ကော်မရှင် ရောင်းချသူက သတ်မှတ်သည်၊ သို့မဟုတ် ဤအစီအစဉ်၏ ဗားရှင်းအသစ်ဖန်တီး၍ ဝင်ငွေခွဲဝေရန် သင့်အစီအစဉ်တွင် ချိတ်ဆက်မှုအဖြစ် ထည့်သွင်းပါ။

ဆွေးနွေးချက်

(0)

ဝင်ရောက် ဆွေးနွေးချက်တွင် ပါဝင်ရန်

မှတ်ချက်များ ရယူနေသည်...