အနုပညာ
အလှအပနှင့် ကျန်းမာရေး
လက်မှုအနုပညာ
ယဉ်ကျေးမှုနှင့် သမိုင်း
ဖျော်ဖြေရေး
ပတ်ဝန်းကျင်
အစားအစာနှင့် အချိုရည်
ပြောင်းပြန်အင်ဂျင်နီယာပညာ
သိပ္ပံပညာများ
အားကစား
နည်းပညာ
ဝတ်ဆင်နိုင်သောပစ္စည်းများ
Wooden Marking Gauge with a Wedge-Locked Headstock
Woody

ဖန်တီးသူ

Woody

14. အောက်တိုဘာ 2026NO
၁၇
၀
၀
၀
၀

Wooden Marking Gauge with a Wedge-Locked Headstock

A marking gauge scribes a line parallel to an edge: a square beam slides through a headstock, a steel pin near the end of the beam scratches the line, and a wedge locks the headstock at the distance you set. Make it from a hardwood strip and a filed steel pin. The picture: a small walnut marking gauge; this one locks with a brass screw and marks with a blade, where ours uses a wedge and a pin.
အလယ်အလတ်
An afternoon

ညွှန်ကြားချက်များ

1

Beam and headstock

Plane a square beam about 20 mm thick and 200 mm long. Cut a block for the headstock and chop a square hole through it so the beam slides snugly.

ဤအဆင့်အတွက် ကုန်ကြမ်းများ:

မာကျောသောသစ်သား အစင်းလွှာမာကျောသောသစ်သား အစင်းလွှာ2 ခု

လိုအပ်သော ကိရိယာများ:

လက်လွှလက်လွှ
လက်ကိုင်သစ်သားရိတ်ကိရိယာလက်ကိုင်သစ်သားရိတ်ကိရိယာ
ထောင့်မှန်တိုင်းကိရိယာထောင့်မှန်တိုင်းကိရိယာ
သစ်သားဆောက်အစုံသစ်သားဆောက်အစုံ
2

Wedge slot

Chop a tapered slot across the headstock that meets the beam hole, and plane a matching wedge about 1 in 12 (our taper).

လိုအပ်သော ကိရိယာများ:

သစ်သားဆောက်အစုံသစ်သားဆောက်အစုံ
လက်ကိုင်သစ်သားရိတ်ကိရိယာလက်ကိုင်သစ်သားရိတ်ကိရိယာ
3

The pin

Drill a small hole near the end of the beam, drive in a short length of steel rod, and file its tip to a fine point standing about 1 mm out.

ဤအဆင့်အတွက် ကုန်ကြမ်းများ:

ပျော့သံမဏိလုံးချောင်းပျော့သံမဏိလုံးချောင်း0.05 m

လိုအပ်သော ကိရိယာများ:

လက်တူးစက်လက်တူးစက်
သံဖြတ်လွှသံဖြတ်လွှ
သတ္တုရိုက်တံသတ္တုရိုက်တံ
4

Check and oil

Set it, run it along a straight edge, and check that the line is parallel at both ends. Oil the wood.

ဤအဆင့်အတွက် ကုန်ကြမ်းများ:

ပိုက်ဆံစေ့ဆီပိုက်ဆံစေ့ဆီ0.02 လီတာ

လိုအပ်သော ကိရိယာများ:

ထောင့်မှန်တိုင်းကိရိယာထောင့်မှန်တိုင်းကိရိယာ
5

Why the wedge holds

Jupyter မှတ်စုစာအုပ် ဖွင့်နေသည်…

ပစ္စည်းများ

3

လိုအပ်သော ကိရိယာများ

7

ဆက်စပ် အစီအစဉ်များ

ဤအစီအစဉ်များသည် အသိပညာမျှဝေသည် — နည်းပညာ၊ ပစ္စည်း သို့မဟုတ် မူများ

CC0 အများပိုင်

ဤအစီအစဉ်ကို CC0 အောက်တွင် ထုတ်ဝေထားသည်။ ခွင့်ပြုချက်မလိုဘဲ ကူးယူ၊ ပြင်ဆင်၊ ဖြန့်ဝေ နှင့် အသုံးပြုနိုင်သည်။

အစီအစဉ်မှတစ်ဆင့် ကုန်ပစ္စည်းများဝယ်ယူ၍ လက်မှုပညာရှင်ကို ပံ့ပိုးပါ လက်မှုပညာရှင် ကော်မရှင် ရောင်းချသူက သတ်မှတ်သည်၊ သို့မဟုတ် ဤအစီအစဉ်၏ ဗားရှင်းအသစ်ဖန်တီး၍ ဝင်ငွေခွဲဝေရန် သင့်အစီအစဉ်တွင် ချိတ်ဆက်မှုအဖြစ် ထည့်သွင်းပါ။

ဆွေးနွေးချက်

(0)

ဝင်ရောက် ဆွေးနွေးချက်တွင် ပါဝင်ရန်

မှတ်ချက်များ ရယူနေသည်...