အနုပညာ
အလှအပနှင့် ကျန်းမာရေး
လက်မှုအနုပညာ
ယဉ်ကျေးမှုနှင့် သမိုင်း
ဖျော်ဖြေရေး
ပတ်ဝန်းကျင်
အစားအစာနှင့် အချိုရည်
ပြောင်းပြန်အင်ဂျင်နီယာပညာ
သိပ္ပံပညာများ
အားကစား
နည်းပညာ
ဝတ်ဆင်နိုင်သောပစ္စည်းများ
Wooden Ruler, Graduated with a Caliper
Woody

ဖန်တီးသူ

Woody

11. အောက်တိုဘာ 2026NO
၄၀
၀
၀
၀
၀

Wooden Ruler, Graduated with a Caliper

A ruler is only as good as its marks. Here every mark is measured from the ruler's own end with a digital caliper, so errors do not add up as they would by stepping off one centimetre after another. A 150 mm caliper marks the first half; the second half is measured from the far end. Straight-grained hardwood stays straight.
အစပြု
2 hours

ညွှန်ကြားချက်များ

1

Plane the blank

Plane a straight-grained hardwood strip to about 310 x 30 x 5 mm, with one long edge dead straight and the ends square.

ဤအဆင့်အတွက် ကုန်ကြမ်းများ:

မာကျောသောသစ်သား အစင်းလွှာမာကျောသောသစ်သား အစင်းလွှာ1 ခု

လိုအပ်သော ကိရိယာများ:

သစ်ချောစက်ငယ်သစ်ချောစက်ငယ်
ဖြောင့်သောအနားဖြောင့်သောအနား
ထောင့်မှန်တိုင်းကိရိယာထောင့်မှန်တိုင်းကိရိယာ
စားပွဲညှပ်စားပွဲညှပ်
2

Mark from the left end

Set the caliper to each length from 0 to 150 mm and, with its fixed jaw on the ruler's left end, nick the edge at the moving jaw with the marking knife.

လိုအပ်သော ကိရိယာများ:

ဒစ်ဂျစ်တယ် ကာလီပါ ၆ လက်မဒစ်ဂျစ်တယ် ကာလီပါ ၆ လက်မ
အမှတ်အသားခြစ်ဓားအမှတ်အသားခြစ်ဓား
3

Mark from the right end

Cut the blank to exactly 300 mm, then mark 150 to 300 by measuring from the right end in the same way.

လိုအပ်သော ကိရိယာများ:

ဒစ်ဂျစ်တယ် ကာလီပါ ၆ လက်မဒစ်ဂျစ်တယ် ကာလီပါ ၆ လက်မ
အမှတ်အသားခြစ်ဓားအမှတ်အသားခြစ်ဓား
ထောင့်မှန်တိုင်းကိရိယာထောင့်မှန်တိုင်းကိရိယာ
4

Knife the lines

Square each nick across with the try square and knife: short lines for mm, medium for 5, long for 10.

လိုအပ်သော ကိရိယာများ:

ထောင့်မှန်တိုင်းကိရိယာထောင့်မှန်တိုင်းကိရိယာ
အမှတ်အသားခြစ်ဓားအမှတ်အသားခြစ်ဓား
5

Finish

Sand lightly and wipe on linseed oil; the oil darkens the knife lines so they read clearly.

ဤအဆင့်အတွက် ကုန်ကြမ်းများ:

ပိုက်ဆံစေ့ဆီပိုက်ဆံစေ့ဆီ10 မီလီ

လိုအပ်သော ကိရိယာများ:

သဲစက္ကူပြားသဲစက္ကူပြား
6

Check it

Measure across several marks with the caliper; note the largest error on the back.

လိုအပ်သော ကိရိယာများ:

ဒစ်ဂျစ်တယ် ကာလီပါ ၆ လက်မဒစ်ဂျစ်တယ် ကာလီပါ ၆ လက်မ

ပစ္စည်းများ

2

လိုအပ်သော ကိရိယာများ

7

ဤဘလူးပရင့်က ပြုလုပ်သည်

CC0 အများပိုင်

ဤအစီအစဉ်ကို CC0 အောက်တွင် ထုတ်ဝေထားသည်။ ခွင့်ပြုချက်မလိုဘဲ ကူးယူ၊ ပြင်ဆင်၊ ဖြန့်ဝေ နှင့် အသုံးပြုနိုင်သည်။

အစီအစဉ်မှတစ်ဆင့် ကုန်ပစ္စည်းများဝယ်ယူ၍ လက်မှုပညာရှင်ကို ပံ့ပိုးပါ လက်မှုပညာရှင် ကော်မရှင် ရောင်းချသူက သတ်မှတ်သည်၊ သို့မဟုတ် ဤအစီအစဉ်၏ ဗားရှင်းအသစ်ဖန်တီး၍ ဝင်ငွေခွဲဝေရန် သင့်အစီအစဉ်တွင် ချိတ်ဆက်မှုအဖြစ် ထည့်သွင်းပါ။

ဆွေးနွေးချက်

(0)

ဝင်ရောက် ဆွေးနွေးချက်တွင် ပါဝင်ရန်

မှတ်ချက်များ ရယူနေသည်...