ပူးပေါင်းဆောင်ရွက်ခြင်း
အနုပညာ
အလှအပနှင့် ကျန်းမာရေး
လက်မှုအနုပညာ
ယဉ်ကျေးမှုနှင့် သမိုင်း
ဖျော်ဖြေရေး
ပတ်ဝန်းကျင်
အစားအစာနှင့် အချိုရည်
ပြောင်းပြန်အင်ဂျင်နီယာပညာ
သိပ္ပံပညာများ
အားကစား
နည်းပညာ
ဝတ်ဆင်နိုင်သောပစ္စည်းများ
Ytterbium: Oxide Reduced by Lanthanum at 1020 °C in Vacuum, Metal Distilled Off (Shindo and Yagi, US 2010/0260640)
Charlie

ဖန်တီးသူ

Charlie

1. နိုဝင်ဘာ 2026DE
၆
၀
၀
၀
၀

Ytterbium: Oxide Reduced by Lanthanum at 1020 °C in Vacuum, Metal Distilled Off (Shindo and Yagi, US 2010/0260640)

Ytterbium boils far more easily than lanthanum. Heated with lanthanum in a vacuum, ytterbium oxide gives up its oxygen to the lanthanum, and the freed ytterbium leaves as vapour and condenses in a cooler zone, while lanthanum oxide stays behind. Result: ytterbium metal ingots; 20 kg of distillate in the patent's run, low in sodium, potassium and lithium. Source: Y. Shindo and K. Yagi, US patent application 2010/0260640 (2010), Example 1. Not given: how much lanthanum, the vacuum, the time, crucible and condenser materials. Picture drawn by Youblob.
အဆင့်မြင့်
1 day

ညွှန်ကြားချက်များ

1

Mix the oxide with lanthanum

Mix ytterbium oxide with lanthanum metal as the reducing agent. Not given: the proportions.

ဤအဆင့်အတွက် ကုန်ကြမ်းများ:

အစ်တာဘီယမ်အောက်ဆိုဒ်အစ်တာဘီယမ်အောက်ဆိုဒ်1 as required

လိုအပ်သော ကိရိယာများ:

လန်သာနမ်လန်သာနမ်
တန်တလမ် မိုက်ခွက်တန်တလမ် မိုက်ခွက်
2

Reduce in vacuum at 1020 °C

Heat the charge in a vacuum to 1020 °C: Yb2O3 + 2 La -> 2 Yb (vapour) + La2O3. Ours: a vacuum induction furnace; the vacuum level and time are not given.

လိုအပ်သော ကိရိယာများ:

အင်ဒက်ရှင် မီးဖိုအင်ဒက်ရှင် မီးဖို
လေဟာနယ်စုပ်စက်လေဟာနယ်စုပ်စက်
တန်တလမ် မိုက်ခွက်တန်တလမ် မိုက်ခွက်
3

Condense the ytterbium at 200-600 °C

Catch the ytterbium vapour on a condenser held at 200-600 °C. Most of it settles in the 300-500 °C part; the 200-300 °C part carries the least sodium and lithium. Ours: a tantalum condenser plate.

လိုအပ်သော ကိရိယာများ:

တန်တလမ် ငွေ့ရည်ဖွဲ့ပြားတန်တလမ် ငွေ့ရည်ဖွဲ့ပြား
4

Melt into ingots under argon

Take the distillate off the condenser, melt it in a crucible at 950 °C under a slight pressure of argon, and let it solidify into an ingot.

လိုအပ်သော ကိရိယာများ:

တန်တလမ် မိုက်ခွက်တန်တလမ် မိုက်ခွက်
အင်ဒက်ရှင် မီးဖိုအင်ဒက်ရှင် မီးဖို
အာဂွန်အာဂွန်

ပစ္စည်းများ

1

လိုအပ်သော ကိရိယာများ

6

ဤဘလူးပရင့်က ပြုလုပ်သည်

CC0 အများပိုင်

ဤအစီအစဉ်ကို CC0 အောက်တွင် ထုတ်ဝေထားသည်။ ခွင့်ပြုချက်မလိုဘဲ ကူးယူ၊ ပြင်ဆင်၊ ဖြန့်ဝေ နှင့် အသုံးပြုနိုင်သည်။

အစီအစဉ်မှတစ်ဆင့် ကုန်ပစ္စည်းများဝယ်ယူ၍ လက်မှုပညာရှင်ကို ပံ့ပိုးပါ လက်မှုပညာရှင် ကော်မရှင် ရောင်းချသူက သတ်မှတ်သည်၊ သို့မဟုတ် ဤအစီအစဉ်၏ ဗားရှင်းအသစ်ဖန်တီး၍ ဝင်ငွေခွဲဝေရန် သင့်အစီအစဉ်တွင် ချိတ်ဆက်မှုအဖြစ် ထည့်သွင်းပါ။

ဆွေးနွေးချက်

(0)

ဝင်ရောက် ဆွေးနွေးချက်တွင် ပါဝင်ရန်

မှတ်ချက်များ ရယူနေသည်...