УРЛАГ
ГОО САЙХАН БА ЭРҮҮЛ МЭНД
ГАРААР ХИЙСЭН
СОЁЛ БА ТҮҮХ
ҮЗВЭР НААДАМ
БАЙГАЛЬ ОРЧИН
ХООЛ БА УНДАА
НОГООН ИРЭЭДҮЙ
УРВУУ ИНЖЕНЕРЧЛЭЛ
ШИНЖЛЭХ УХААН
СПОРТ
ТЕХНОЛОГИ
ӨМСДӨГ ХЭРЭГСЭЛ

Making an Mbira — The African Thumb Piano
Make an mbira: a hardwood board fitted with a row of tuned metal tongues you pluck with your thumbs, often set in a gourd with rattling buzzers. Cut and tune the metal keys, mount them over a bridge, and play. A buildable project in the plucked metal tongue — many jaw-harp tongues made into a keyboard.
Дунд шат
A few hours over a couple of sessions
Зааварчилгаа
1
1
Tongues you pluck with your thumbs
Tongues you pluck with your thumbs
The mbira is a hardwood board carrying a row of tuned metal tongues (keys). You press each key down with a thumb and let it spring back, plucking out the note — many springy tongues laid out like a keyboard.
2
2
Prepare the soundboard
Prepare the soundboard
Shape a flat hardwood soundboard — the harder and more resonant the wood, the brighter the ring.
Materials for this step:
Bloodwood Board1 ширхэгTools needed:
Sloyd Carving Knife3
3
Make the metal keys
Make the metal keys
Cut and flatten springy steel into a set of thin tongues (keys) of graduated length — longer keys for low notes, shorter for high. File the tips smooth.
Materials for this step:
Spring Steel Strip (1095, 1x12 inch)2 ширхэгTools needed:
Metal File4
4
Build the bridge and pressure bar
Build the bridge and pressure bar
Fix a hardwood bridge across the board and a straight pressure bar just above it. The keys clamp between them, held down at one end and free to spring at the other.
Materials for this step:
Steel Music Wire 0.032"1 ширхэгTools needed:
Awl5
5
Mount and tune the keys
Mount and tune the keys
Slide each key under the pressure bar. Push a key IN (shorter free end) to raise its note, or OUT (longer free end) to lower it — that is how you tune an mbira, by sliding not filing.
6
6
Add a gourd and buzzers
Add a gourd and buzzers
Rest the board in a big hollow gourd to make it louder, and fix loose bottle-caps or shells to the board so they buzz — the shimmering rattle is part of the mbira's voice.
Materials for this step:
Mature Bottle Gourd1 ширхэг7
7
Play with your thumbs
Play with your thumbs
Hold the mbira in both hands and pluck the keys downward with your thumbs (and one key up with a finger), weaving the interlocking patterns of Shona music.
8
8
Compendium — the plucked tongue, multiplied
Compendium — the plucked tongue, multiplied
The mbira is a lamellophone: an instrument of thin tongues (lamellae) fixed at one end and free to vibrate at the other. Pluck a tongue and it springs back and forth at a pitch set by how long, thick and stiff its free part is — short, stiff tongues buzz fast and sound high; long ones vibrate slowly and sound low. That is exactly the tongue of the jaw harp, only here there is a whole tuned SET of them side by side, so instead of one drone you have a keyboard you can play melodies and interlocking parts on. You tune each key not by filing but by sliding it under the pressure bar to lengthen or shorten its free end — longer is lower, shorter is higher. The hardwood board and the gourd it sits in amplify the quiet tongues, and loose buzzers add the shimmering rattle (a deliberate mirliton) that Shona players prize. Made across southern Africa for well over a thousand years — the Shona mbira, the kalimba, the many 'thumb pianos' — it is the ancestor of the modern kalimba, and its cousin is the free reed of the sheng, a tongue set vibrating by breath rather than by a thumb.
Материал
4- 1 ширхэгPlaceholder
- Placeholder
- 1 ширхэгPlaceholder
- 1 ширхэгPlaceholder
You can swap these in
Can't get one of the materials? Swap it for an equivalent — these work just as well.
- Instead of Sloyd Carving Knife, try:
Blunt Collection Knife
Gilder's Knife
Knife
Sharp Cinnamon Knife
Sharp Knife (faca) - Instead of Steel Music Wire 0.032", try:
Hook-Up Wire - Assortment (Stranded)
Tie Wire
Thin Brass Wire (for cleaning spouts)
Slip Ring - 6 Wire (2A)
Bezel Wire
Bronze Wire - Instead of Spring Steel Strip (1095, 1x12 inch), try:
Mild Steel Bar
Холбоотой загварууд
Эдгээр загварууд мэдлэг хуваалцдаг — арга техник, материал эсвэл зарчим
Related blueprints
Other builds that share materials, tools, or techniques with this one.

Making Venetian Cristallo — The Water-Clear Glass of Muranoglassworking

Making a Hammerstone — The First Tool in Human Historystoneworking

Making Egyptian Blue — The World's First Synthetic Pigmentpigment-making

Making an Alarm Gjallarhorn — The Warning Horn

Building a Kora — The West African Harp-Lute

Making Paper from Linen Rags — European Hand PapermakingPapercraft
CC0 Нийтийн домэйн
Энэ загвар CC0 дор гаргагдсан. Та зөвшөөрөл авахгүйгээр хуулах, өөрчлөх, түгээх, ашиглах боломжтой.
Загвараар дамжуулан бүтээгдэхүүн худалдаж авч Бүтээгчийг дэмжээрэй Бүтээгчийн шимтгэл Борлуулагчаар тогтоосон, эсвэл энэ загварын шинэ хувилбар үүсгэж орлогоо хуваахын тулд өөрийн загварт холбоос болгон оруулна уу.