Хамтын ажиллагаа
УРЛАГ
ГОО САЙХАН БА ЭРҮҮЛ МЭНД
ГАРААР ХИЙСЭН
СОЁЛ БА ТҮҮХ
ҮЗВЭР НААДАМ
БАЙГАЛЬ ОРЧИН
ХООЛ БА УНДАА
УРВУУ ИНЖЕНЕРЧЛЭЛ
ШИНЖЛЭХ УХААН
СПОРТ
ТЕХНОЛОГИ
ӨМСДӨГ ХЭРЭГСЭЛ
Aluminium Oxide Abrasive Grit: Alundum by Jacobs's Process (Stansfield, 1914)
Charlie

Зохиогч

Charlie

4. Арван нэгдүгээр сар 2026DE
10
0
0
0
0

Aluminium Oxide Abrasive Grit: Alundum by Jacobs's Process (Stansfield, 1914)

Alundum, the artificial corundum made at Niagara Falls by the Norton Company: bauxite, calcined to drive off its water, is fused in an electric arc furnace with about 5 per cent carbon, which reduces its iron, silicon and titanium to metal nodules; the fused alumina cools slowly into a hard crystalline mass that is crushed and sized as abrasive grit. Bauxite melts near 2,000 °C and could not be melted commercially without the electric furnace. Source: A. Stansfield, The Electric Furnace, 2nd ed. (1914), pp. 357-358. Picture: the book's Fig. 143, the Higgins alundum furnace.
Дээд шат
Unknown

Зааварчилгаа

1

Calcine the bauxite

Calcine the bauxite in a rotary kiln to drive off its combined water.

Энэ алхмын материал:

БокситБоксит1 ширхэг

Шаардлагатай багаж:

Эргэдэг зуухЭргэдэг зуух
2

Fuse in the arc furnace

Strike arcs between the electrodes and the carbon lining of the furnace bottom, then feed the calcined bauxite, with about 5 per cent carbon, in round the arcs; it melts and in time carries the current between the two arcs. Lower the water-cooled shell as the fused alundum builds up; the lower part solidifies as it fills.

Энэ алхмын материал:

НүүрстөрөгчНүүрстөрөгч1 about 5 per cent

Шаардлагатай багаж:

Цахилгаан нумт зуухЦахилгаан нумт зуух
3

Cool slowly

When the shell is full, lift it with its contents off the base, put another shell in place, and let the alundum cool slowly so it grows into a hard, tough crystalline mass.

Шаардлагатай багаж:

Цахилгаан нумт зуухЦахилгаан нумт зуух
4

Crush, separate and size

Break up and crush the mass, separate the nodules of reduced metal mechanically, and size the grains for use as an abrasive.

Шаардлагатай багаж:

Чулуу бутлуурЧулуу бутлуур
Шигшүүрийн багц (шатлалт нүх)Шигшүүрийн багц (шатлалт нүх)

Материал

2
  • 1 ширхэг
    Түр орлуулагч
  • 1 about 5 per cent
    Түр орлуулагч

Шаардлагатай багаж

4

CC0 Нийтийн домэйн

Энэ загвар CC0 дор гаргагдсан. Та зөвшөөрөл авахгүйгээр хуулах, өөрчлөх, түгээх, ашиглах боломжтой.

Загвараар дамжуулан бүтээгдэхүүн худалдаж авч Бүтээгчийг дэмжээрэй Бүтээгчийн шимтгэл Борлуулагчаар тогтоосон, эсвэл энэ загварын шинэ хувилбар үүсгэж орлогоо хуваахын тулд өөрийн загварт холбоос болгон оруулна уу.

Хэлэлцүүлэг

(0)

Нэвтрэх хэлэлцүүлэгт нэгдэхийн тулд

Сэтгэгдлүүдийг ачаалж байна...