Хамтын ажиллагаа
УРЛАГ
ГОО САЙХАН БА ЭРҮҮЛ МЭНД
ГАРААР ХИЙСЭН
СОЁЛ БА ТҮҮХ
ҮЗВЭР НААДАМ
БАЙГАЛЬ ОРЧИН
ХООЛ БА УНДАА
УРВУУ ИНЖЕНЕРЧЛЭЛ
ШИНЖЛЭХ УХААН
СПОРТ
ТЕХНОЛОГИ
ӨМСДӨГ ХЭРЭГСЭЛ
Chemical-Resistant Gloves: Butyl Latex over Natural Rubber on a Cotton Liner (Hart & Collyer, US 4,190,685, 1980)
Tex

Зохиогч

Tex

3. Арван нэгдүгээр сар 2026FO
15
0
0
0
0

Chemical-Resistant Gloves: Butyl Latex over Natural Rubber on a Cotton Liner (Hart & Collyer, US 4,190,685, 1980)

Dipped rubber gloves built in layers on a knitted cotton liner: one coat of natural rubber, then five coats of butyl rubber, which lets very little liquid or vapour through. Each coat is dipped from latex on a porcelain hand form, and the whole glove is cured under steam and air pressure. Made in Canada to protect soldiers against chemical warfare agents; worn gloves showed no penetration in 24 hours of field use. Result: flexible, soft chemical-resistant gloves with a comfortable cotton lining. Source: J. A. Hart and J. C. Collyer, US 4,190,685 (1980), latex method. Unknown: sizes, the pigments. Picture: the patent drawing.
Дээд шат
Unknown

Зааварчилгаа

1

Sew the cotton liner

Cut knitted or interlock cotton fabric to a glove shape and sew it into a glove. It stretches both ways, soaks up sweat and makes the glove easy to put on and take off. Not given: sizes, the knit.

Энэ алхмын материал:

Сүлжмэл хөвөн даавууСүлжмэл хөвөн даавуу1 liner

Шаардлагатай багаж:

ХайчХайч
Оёдлын машинОёдлын машин
Тодорхойгүй хэмжээсТодорхойгүй хэмжээс
2

Dip in coagulant

Pull the liner onto a porcelain hand form and flame it to smooth off the surface. Dip it in a 10 % solution of acetic acid in acetone, then turn the form for about 2½ minutes at 24 °C until it is dry. The coagulant sets the latex before it can soak through the cloth.

Энэ алхмын материал:

Цууны хүчил (мөстлөгт)Цууны хүчил (мөстлөгт)1 10 % in acetone
АцетонАцетон1 solvent

Шаардлагатай багаж:

Бээлийн хэвБээлийн хэв
Пропаны бамбарПропаны бамбар
3

Dip the natural rubber coat

Dip the liner into natural rubber latex (the patent uses LOTOL 1185) and leave it 5 seconds. Draw it out, turn it upside down and let it dry. Scrub the rubber film with an abrasive cleaner, a brush and water, and dry it again.

Энэ алхмын материал:

Байгалийн каучукийн латексБайгалийн каучукийн латекс1 bath
Зүлгүүртэй цэвэрлэгчЗүлгүүртэй цэвэрлэгч1 as needed

Шаардлагатай багаж:

Бээлийн хэвБээлийн хэв
Угаалгын сойзУгаалгын сойз
4

Mix the butyl latex bath

Mix, in parts by dry weight: butyl rubber latex 100, sulphur 3, zinc dibutyldithiocarbamate 4, zinc oxide 5, formaldehyde 0.1 as a preservative, a liquid dithiocarbamate curing accelerator 4 (Merac 255 in the patent), and 6.5 of pigments (olive drab in the patent). Not given: the pigments.

Энэ алхмын материал:

Бутил резины латексБутил резины латекс100 parts dry
ХүхэрХүхэр3 parts
Цайрын дибутилдитиокарбаматЦайрын дибутилдитиокарбамат4 parts
Цайрын ислийн нунтагЦайрын ислийн нунтаг5 parts
Формальдегидийн уусмал (37 % формалин)Формальдегидийн уусмал (37 % формалин)0.1 parts formaldehyde
Шингэн дитиокарбамат хурдасгагчШингэн дитиокарбамат хурдасгагч4 parts
Тодорхойгүй материалТодорхойгүй материал6.5 parts pigment

Шаардлагатай багаж:

ХутгагчХутгагч
5

Dip five butyl coats

Dip the glove into the butyl latex and draw it out at 10 cm per minute. At once turn the form at about 8 rpm at 24 °C until the film has gelled, then dry it upside down in an oven at 66 °C for 1 hour. Wash, dip and dry again until there are five butyl coats; do not use the abrasive cleaner on the butyl film.

Шаардлагатай багаж:

Бээлийн хэвБээлийн хэв
Хатаах зуухХатаах зуух
6

Cure and finish

Dry the glove at 66 °C for 1 hour. Cure it for 3 hours in a pressure vessel with 30 psi steam in the jacket (131 °C) and 26 psi air in the chamber. Strip the gloves from the forms while hot; when cool, trim them and wash them in soapy water.

Энэ алхмын материал:

СаванСаван1 as needed

Шаардлагатай багаж:

Ширээний автоклавШирээний автоклав
ХайчХайч

Материал

13

Шаардлагатай багаж

9

CC0 Нийтийн домэйн

Энэ загвар CC0 дор гаргагдсан. Та зөвшөөрөл авахгүйгээр хуулах, өөрчлөх, түгээх, ашиглах боломжтой.

Загвараар дамжуулан бүтээгдэхүүн худалдаж авч Бүтээгчийг дэмжээрэй Бүтээгчийн шимтгэл Борлуулагчаар тогтоосон, эсвэл энэ загварын шинэ хувилбар үүсгэж орлогоо хуваахын тулд өөрийн загварт холбоос болгон оруулна уу.

Хэлэлцүүлэг

(0)

Нэвтрэх хэлэлцүүлэгт нэгдэхийн тулд

Сэтгэгдлүүдийг ачаалж байна...