Хамтын ажиллагаа
УРЛАГ
ГОО САЙХАН БА ЭРҮҮЛ МЭНД
ГАРААР ХИЙСЭН
СОЁЛ БА ТҮҮХ
ҮЗВЭР НААДАМ
БАЙГАЛЬ ОРЧИН
ХООЛ БА УНДАА
УРВУУ ИНЖЕНЕРЧЛЭЛ
ШИНЖЛЭХ УХААН
СПОРТ
ТЕХНОЛОГИ
ӨМСДӨГ ХЭРЭГСЭЛ

Cutting Oil: Lard Oil Pressed Out of Lard
Before mineral oils, machinists cut, drilled and tapped metal with animal fats, lard above all. Lard is part liquid oil (oleine) and part solid fat (stearine); chill it and squeeze it in linen bags and the oil runs out, as Andrew Ure (1839) describes. That lard oil is the cutting oil.
The picture: a cake of home-rendered lard, the starting point.
Анхан шат
Two days
Зааварчилгаа
1
1
Cut and render the fat
Cut and render the fat
Cut or grind the pig fat small, melt it slowly in a pot with a splash of water, without browning, and strain the clear liquid lard through muslin.
Энэ алхмын материал:
Гахайн өөх (бөөрний болон нурууны өөх)7 кг
Ус0.2 литрШаардлагатай багаж:
Махны хутга ба боловсруулах багц
Мах татах машин
Том тогоо
Халаах хавтан
Муслин даавуу
Дэнсний жинлүүр2
2
Let it grain cold
Let it grain cold
Let the lard set and stand somewhere cool, around 10 °C (our choice), for a day so the solid part grains out.
Шаардлагатай багаж:
Термометр3
3
Press in linen bags
Press in linen bags
Spoon the cold, grainy lard into linen bags and press them slowly. The clear oil runs off; the hard white stearine stays in the bags.
Шаардлагатай багаж:
Маалинган даавуу
Бяслаг дарагч4
4
Settle and bottle
Settle and bottle
Let the oil settle, pour it off clear and bottle it. Brush or drip it onto the work when cutting, drilling or tapping.
Шаардлагатай багаж:
Хув өнгийн шилэн сав5
5
Oil in the lard
Oil in the lard
Jupyter дэвтэр ачаалж байна…
6
6
Limits
Limits
Lard's make-up and the pressing are Ure's; lard as a cutting fluid is from Wikipedia. The rendering, the pressing temperature and the recovery are ours. Lard oil goes rancid with time: make small batches.
Шаардлагатай багаж
10- Түр орлуулагч
- Түр орлуулагч
- Түр орлуулагч
- Түр орлуулагч
- Түр орлуулагч
- Түр орлуулагч
- Түр орлуулагч
- Түр орлуулагч
- Түр орлуулагч
- Түр орлуулагч
Энэ загвараар хийдэг
Холбоотой загварууд
Эдгээр загварууд мэдлэг хуваалцдаг — арга техник, материал эсвэл зарчим
CC0 Нийтийн домэйн
Энэ загвар CC0 дор гаргагдсан. Та зөвшөөрөл авахгүйгээр хуулах, өөрчлөх, түгээх, ашиглах боломжтой.
Загвараар дамжуулан бүтээгдэхүүн худалдаж авч Бүтээгчийг дэмжээрэй Бүтээгчийн шимтгэл Борлуулагчаар тогтоосон, эсвэл энэ загварын шинэ хувилбар үүсгэж орлогоо хуваахын тулд өөрийн загварт холбоос болгон оруулна уу.

