Хамтын ажиллагаа
УРЛАГ
ГОО САЙХАН БА ЭРҮҮЛ МЭНД
ГАРААР ХИЙСЭН
СОЁЛ БА ТҮҮХ
ҮЗВЭР НААДАМ
БАЙГАЛЬ ОРЧИН
ХООЛ БА УНДАА
УРВУУ ИНЖЕНЕРЧЛЭЛ
ШИНЖЛЭХ УХААН
СПОРТ
ТЕХНОЛОГИ
ӨМСДӨГ ХЭРЭГСЭЛ
Forge-Welded Plough and Trace Chain: Links Bent, Scarfed and Welded One into the Next, with S-Hooks and a Swivel (Edwinson, 1886)
Forge

Зохиогч

Forge

14. Арван нэгдүгээр сар 2026NO
6
0
0
0
0

Forge-Welded Plough and Trace Chain: Links Bent, Scarfed and Welded One into the Next, with S-Hooks and a Swivel (Edwinson, 1886)

How a country smith made and mended farm chain, from George Edwinson's series in Amateur Work (1886): rod cut to link length plus one-third, bent hot, scarfed and forge-welded shut through the previous link; tough S-hooks for field repairs and a forged swivel link with its pin.
Дунд шат
A few minutes per link

Зааварчилгаа

1

His rules

Jupyter дэвтэр ачаалж байна…
2

Read Edwinson

"Measure the length of a link in the chain, add one-third to this, and the total will give the required length of iron for an oval link."
3

Cut the stock

For an oval link cut rod the link length plus one-third; for a round link a little over three times its diameter. Nick the lengths off the rod (his fig. 163).

Энэ алхмын материал:

Давтмал төмрийн савааДавтмал төмрийн саваа1 ширхэг

Шаардлагатай багаж:

Халуун цүүцХалуун цүүц
ДөшДөш
АлхАлх
4

Bend and scarf

Heat the middle of a piece red, bend it into a U (fig. 164), and scarf both ends (fig. 165).

Шаардлагатай багаж:

Дархны зуухДархны зуух
ДөшДөш
АлхАлх
Дархны хавчаарДархны хавчаар
5

Weld the links

Thread the open link through the last finished link, bring it to a welding heat, close it up and weld it shut. Repeat link by link.

Энэ алхмын материал:

ЭлсЭлс1 ширхэг

Шаардлагатай багаж:

Дархны зуухДархны зуух
ДөшДөш
АлхАлх
Дархны хавчаарДархны хавчаар
6

S-hooks for repairs

Bend S-hooks (fig. 166) from tough iron and cool them slowly. A broken chain is mended in the field by bending the hook ends over the broken links (fig. 167).

Энэ алхмын материал:

Давтмал төмрийн савааДавтмал төмрийн саваа1 ширхэг

Шаардлагатай багаж:

Дархны зуухДархны зуух
ДөшДөш
АлхАлх
7

Swivel link

Cut iron as for a round link, double it (fig. 168), form it over the beck of the anvil (169), weld the ends together and draw them out (170), then form, bend over and scarf (171). Forge the swivel pin (172), set it in the swivel's boss, weld up the eye and finish (173).

Энэ алхмын материал:

Давтмал төмрийн савааДавтмал төмрийн саваа1 ширхэг

Шаардлагатай багаж:

Дархны зуухДархны зуух
ДөшДөш
АлхАлх
Дархны хавчаарДархны хавчаар
8

Troubleshooting

Chain troubleshooting.

Flow

Loading...
9

History and honest limits

From George Edwinson, "Smithing and Forging" VIII, **Amateur Work, Illustrated**, vol. VI (1886-87), p. 83 and figs. 162-175 on p. 80 (checked on the archive.org scan amateurworkillus06lond). He gives no rod size for plough chain; the notebook link sizes, metric figures and tools are ours.

Материал

2

Шаардлагатай багаж

5

Энэ загвараар хийдэг

CC0 Нийтийн домэйн

Энэ загвар CC0 дор гаргагдсан. Та зөвшөөрөл авахгүйгээр хуулах, өөрчлөх, түгээх, ашиглах боломжтой.

Загвараар дамжуулан бүтээгдэхүүн худалдаж авч Бүтээгчийг дэмжээрэй Бүтээгчийн шимтгэл Борлуулагчаар тогтоосон, эсвэл энэ загварын шинэ хувилбар үүсгэж орлогоо хуваахын тулд өөрийн загварт холбоос болгон оруулна уу.

Хэлэлцүүлэг

(0)

Нэвтрэх хэлэлцүүлэгт нэгдэхийн тулд

Сэтгэгдлүүдийг ачаалж байна...