Хамтын ажиллагаа
УРЛАГ
ГОО САЙХАН БА ЭРҮҮЛ МЭНД
ГАРААР ХИЙСЭН
СОЁЛ БА ТҮҮХ
ҮЗВЭР НААДАМ
БАЙГАЛЬ ОРЧИН
ХООЛ БА УНДАА
УРВУУ ИНЖЕНЕРЧЛЭЛ
ШИНЖЛЭХ УХААН
СПОРТ
ТЕХНОЛОГИ
ӨМСДӨГ ХЭРЭГСЭЛ

Steel-Laid Axe and Hatchet: Iron Folded Round a Mandrel, Shear Steel Welded Between the Leaves (Edwinson, 1886)
How axes and hatchets were made of iron and shear steel, from George Edwinson's smithing series (Amateur Work, 1886): a flat iron bar folded round a tapering mandrel to make the eye, the leaves welded, and a thin slice of steel welded between them so the ground edge is always steel.
Дээд шат
A day at the forge
Зааварчилгаа
1
1
Read Edwinson
Read Edwinson
"By this means a layer of steel is enclosed between two layers of iron, and a steel edge is always ensured to the tool."
2
2
Fold the eye
Fold the eye
Take flat iron of the width and thickness you want, twice the length of the blade. Heat it and bend it over a tapering mandrel the same section as the handle (his fig. 225).
Энэ алхмын материал:
Давтсан төмөр гулдмай1 ширхэгШаардлагатай багаж:
Дархны зуух
Дөш
Том алх
Дархны хавчаар
Нүх тэлэгч3
3
Close and shape the eye
Close and shape the eye
Weld the two leaves together where they meet near the eye. Reheat and forge the eye to shape on the mandrel, then drive the mandrel in the other way to open the inner edge of the eye slightly.
Энэ алхмын материал:
Борын нунтаг1 ширхэгШаардлагатай багаж:
Дархны зуух
Дөш
Алх
Нүх тэлэгч4
4
Lay in the steel
Lay in the steel
Put a thin slice of shear steel, as wide as the axe, between the two leaves. Bring both to a welding heat and forge them down together to the thickness and width wanted.
Энэ алхмын материал:
Нугалж давтсан (shear) ган хавтан1 ширхэг
Борын нунтаг1 ширхэгШаардлагатай багаж:
Дархны зуух
Дөш
Том алх
Дархны хавчаар5
5
Hatchet hammer (variant)
Hatchet hammer (variant)
For a carpenter's hatchet (fig. 223) weld a rectangular piece of steel to the back of the eye and forge it down with it as the hammer. The miner's hatchet (fig. 224) has a massive ear, a bar-steel hammer and a slit in the blade for drawing nails. Do not make a woodman's axe square-headed: men drive wedges with the back and spoil it.
Энэ алхмын материал:
Тигелийн ган1 ширхэгШаардлагатай багаж:
Дархны зуух
Дөш
Алх
Халуун цүүц6
6
Pare and smooth
Pare and smooth
Pare the rough forging to shape with hot chisels (his setts) while hot. Hammer the sides well at a low red heat until smooth.
Шаардлагатай багаж:
Дархны зуух
Халуун цүүц
Дөш
Алх7
7
Harden, temper and grind
Harden, temper and grind
Harden and temper the blade, then grind it on a grindstone to sharpen the edge and polish the blade.
Шаардлагатай багаж:
Дархны зуух
Хатууруулах тэвш
Эргэдэг хурцлах чулуу8
8
Hang the head (ours)
Hang the head (ours)
He does not cover the handle. Ours: fit a hickory handle blank to the eye and wedge it.
Энэ алхмын материал:
Модон сүхний ишний бэлдэц (хикори)1 ширхэг
Модон шаантаг1 ширхэгШаардлагатай багаж:
Хос ишт хусуур
Алх9
9
Troubleshooting
Troubleshooting
Axe troubleshooting.
Flow
Loading...
10
10
History and honest limits
History and honest limits
From George Edwinson, "Smithing and Forging" (part X), **Amateur Work, Illustrated**, vol. VI (Ward, Lock & Co., 1886-87), pp. 211-214 (checked on the archive.org scan amateurworkillus06lond), p. 212 and figs. 222-225. He gives no temper colour for axes, no sizes and no handle: those are ours.
Материал
6- 1 ширхэгТүр орлуулагч
- 1 ширхэгТүр орлуулагч
- Түр орлуулагч
- 1 ширхэгТүр орлуулагч
- Түр орлуулагч
- 1 ширхэгТүр орлуулагч
Шаардлагатай багаж
10- Түр орлуулагч
- Түр орлуулагч
- Түр орлуулагч
- Түр орлуулагч
- Түр орлуулагч
- Түр орлуулагч
- Түр орлуулагч
- Түр орлуулагч
- Түр орлуулагч
- Түр орлуулагч
Энэ загвараар хийдэг
Холбоотой загварууд
Эдгээр загварууд мэдлэг хуваалцдаг — арга техник, материал эсвэл зарчим
CC0 Нийтийн домэйн
Энэ загвар CC0 дор гаргагдсан. Та зөвшөөрөл авахгүйгээр хуулах, өөрчлөх, түгээх, ашиглах боломжтой.
Загвараар дамжуулан бүтээгдэхүүн худалдаж авч Бүтээгчийг дэмжээрэй Бүтээгчийн шимтгэл Борлуулагчаар тогтоосон, эсвэл энэ загварын шинэ хувилбар үүсгэж орлогоо хуваахын тулд өөрийн загварт холбоос болгон оруулна уу.




