Хамтын ажиллагаа
УРЛАГ
ГОО САЙХАН БА ЭРҮҮЛ МЭНД
ГАРААР ХИЙСЭН
СОЁЛ БА ТҮҮХ
ҮЗВЭР НААДАМ
БАЙГАЛЬ ОРЧИН
ХООЛ БА УНДАА
УРВУУ ИНЖЕНЕРЧЛЭЛ
ШИНЖЛЭХ УХААН
СПОРТ
ТЕХНОЛОГИ
ӨМСДӨГ ХЭРЭГСЭЛ

English
Feeler Gauge Set in a Folding Handle: Curtin, 1911
Feelers are thin blades of known thickness, used to measure small gaps by feel. Peter A. Curtin of Buffalo patented a pocket set in 1911, US 987,703: blades differing by about a thousandth of an inch (for example 0.002, 0.003, 0.004 and 0.006 in), each marked with its thickness, all pivoted on one screw between the two sides of a handle so they fold away like the blades of a jack-knife. Two or more blades laid side by side measure their combined thickness. The thin blades are flexible enough to be pressed together at their free ends even when they do not lie next to each other at the pivot.
Дунд шат
Workshop process
Зааварчилгаа
1
1
Blades
Blades
Make the feeler blades in a series of thicknesses, each with a hole at one end, and mark each with its thickness.
Энэ алхмын материал:
Завсар хэмжигчийн ялтас1 ширхэгШаардлагатай багаж:
Тугалган цаас огтлох хайч
Гар өрөм
Дүрд (гар дүрд)2
2
Handle
Handle
Hold the two handle sides the right distance apart with a bolster at the lower end, fixed by a rivet. Cut a notch near the lower end to make the blades easy to open.
Энэ алхмын материал:
Эргэдэг иртэй бариул1 ширхэг
Ган ривет1 ширхэгШаардлагатай багаж:
Гар өрөм
Ривет алх
Дүрд (гар дүрд)3
3
Pivot
Pivot
Pass the pivot screw through the handle sides and the holes of all the blades, so each blade folds into the handle like a jack-knife blade.
Шаардлагатай багаж:
Халив иж бүрдэлМатериал
3- 1 ширхэгТүр орлуулагч
- 1 ширхэгТүр орлуулагч
- 1 ширхэгТүр орлуулагч
Энэ загвараар хийдэг
Холбоотой загварууд
Эдгээр загварууд мэдлэг хуваалцдаг — арга техник, материал эсвэл зарчим
CC0 Нийтийн домэйн
Энэ загвар CC0 дор гаргагдсан. Та зөвшөөрөл авахгүйгээр хуулах, өөрчлөх, түгээх, ашиглах боломжтой.
Загвараар дамжуулан бүтээгдэхүүн худалдаж авч Бүтээгчийг дэмжээрэй Бүтээгчийн шимтгэл Борлуулагчаар тогтоосон, эсвэл энэ загварын шинэ хувилбар үүсгэж орлогоо хуваахын тулд өөрийн загварт холбоос болгон оруулна уу.

