Хамтын ажиллагаа
УРЛАГ
ГОО САЙХАН БА ЭРҮҮЛ МЭНД
ГАРААР ХИЙСЭН
СОЁЛ БА ТҮҮХ
ҮЗВЭР НААДАМ
БАЙГАЛЬ ОРЧИН
ХООЛ БА УНДАА
УРВУУ ИНЖЕНЕРЧЛЭЛ
ШИНЖЛЭХ УХААН
СПОРТ
ТЕХНОЛОГИ
ӨМСДӨГ ХЭРЭГСЭЛ

Gasholder: Water-Sealed Zinc Gasometer with Balance Weights (Ramsay & Travers, 1898)
The laboratory gasometer Ramsay and Travers used to store argon: a zinc bell that rises and falls in a narrow ring of water between two fixed zinc cylinders. Because the water space is only about 2 cm wide, little gas dissolves in it. Weights on cords over pulleys balance the bell, and weights laid on top push the gas out.
Result: a water-sealed gasholder of 18 to 180 litres.
Source: M. W. Travers, The Experimental Study of Gases (1901), pp. 30 and 105-106. Unknown: sizes and how the zinc is joined. Picture: Fig. 34, the small mercury form of the same design.
Дунд шат
Unknown
Зааварчилгаа
1
1
Make the fixed cylinders
Make the fixed cylinders
Make two concentric zinc cylinders on a closed base, leaving a ring-shaped space about 2 cm wide between them for the water. Make the top of the inner cylinder dome-shaped. Bring a gas pipe with a stopcock up through the inner cylinder. Ours: zinc soldered with tin-lead solder. Not given: sizes, how the zinc is joined, the stopcock.
Энэ алхмын материал:
Цайрын хуудас1 outer and inner cylinders, base
Цагаан тугалга-хар тугалганы гагнуур1 seams
Үл мэдэгдэх хавхлага1 gas stopcockШаардлагатай багаж:
Тугалган цаас огтлох хайч
Гагнуурын хэрэгсэл
Үл мэдэгдэх хэлбэржүүлэх арга
Тодорхойгүй хэмжээс2
2
Make and hang the bell
Make and hang the bell
Make the gasholder bell of zinc to fit closely over the inner cylinder and down into the water ring, with a dome-shaped top matching the inner cylinder's, so all the gas can be pushed out. Ramsay and Travers made bells of about 180, 27, 18 and 18 litres. Tie a cord to the top of the bell and pass it over pulleys to a hanging weight, to take the bell's own weight off the gas. Fill the ring with water. To deliver gas, take weight off the cord or lay weights on top of the bell. Not given: the weights.
Энэ алхмын материал:
Цайрын хуудас1 bell
Цагаан тугалга-хар тугалганы гагнуур1 seams
Олсны ургамлын дээс1 balance cords
Дамар2 pulleys
Тодорхойгүй металл1 balance weightsШаардлагатай багаж:
Тугалган цаас огтлох хайч
Гагнуурын хэрэгсэлМатериал
6- 1 bellТүр орлуулагч
- Түр орлуулагч
- 1 gas stopcockТүр орлуулагч
- 1 balance cordsТүр орлуулагч
- 2 pulleysТүр орлуулагч
- 1 balance weightsТүр орлуулагч
Шаардлагатай багаж
4- Түр орлуулагч
- 2 vendors sell this, none ship to you yetТүр орлуулагч
- Түр орлуулагч
- Түр орлуулагч
Холбогдсон загварын материал

10% хамаарал
Zinc Sheet Cast as a Plate and Hammered Warm
Forge зохиосон
Металл боловсруулалт
25
0
0
0
1
0

Аюултай
10% хамаарал
Making Tin-Lead Solder — The Ancient Alloy That Joins Metals Without a Forge
Peter зохиосон
Металл боловсруулалт
63
0
0
0
3
0

10% хамаарал
Hand-Spun Three-Ply Hemp Cord
Tex зохиосон
Нэхмэл ба савхи
45
0
0
0
1
0
Энэ загвараар хийдэг
CC0 Нийтийн домэйн
Энэ загвар CC0 дор гаргагдсан. Та зөвшөөрөл авахгүйгээр хуулах, өөрчлөх, түгээх, ашиглах боломжтой.
Загвараар дамжуулан бүтээгдэхүүн худалдаж авч Бүтээгчийг дэмжээрэй Бүтээгчийн шимтгэл Борлуулагчаар тогтоосон, эсвэл энэ загварын шинэ хувилбар үүсгэж орлогоо хуваахын тулд өөрийн загварт холбоос болгон оруулна уу.
