Хамтын ажиллагаа
УРЛАГ
ГОО САЙХАН БА ЭРҮҮЛ МЭНД
ГАРААР ХИЙСЭН
СОЁЛ БА ТҮҮХ
ҮЗВЭР НААДАМ
БАЙГАЛЬ ОРЧИН
ХООЛ БА УНДАА
УРВУУ ИНЖЕНЕРЧЛЭЛ
ШИНЖЛЭХ УХААН
СПОРТ
ТЕХНОЛОГИ
ӨМСДӨГ ХЭРЭГСЭЛ
Flower Holder for a Vase: Crossed Brass Strips Carrying Slit Spring Cones That Grip Each Stem (Green, 1903)
Forge

Зохиогч

Forge

13. Арван нэгдүгээр сар 2026NO
8
0
0
0
0

Flower Holder for a Vase: Crossed Brass Strips Carrying Slit Spring Cones That Grip Each Stem (Green, 1903)

Francis W. Green of Brooklyn received US 720,132, dated 10 February 1903, for a holder that sits on the mouth of a vase and holds each flower separately, at the height you choose. Metal strips cross at the centre and hook over the rim; small cones of sheet metal, slit at the bottom, hang in holes along the strips and grip each stem like a spring, so a bunch can be arranged "as may suit the individual taste of the user". We make it from brass. All sizes are ours.
Анхан шат
About 3 hours

Зааварчилгаа

1

Cone blank

Jupyter дэвтэр ачаалж байна…
2

Read US 720,132

"The stems of the sprays or flowers may be inserted and forced downward through the conical holder until the head of the flower or spray is at the desired position in the holder."
3

Make the frame

Cut four brass strips a little longer than your vase's mouth is wide. Drill each at its centre and rivet all four together crossed at equal angles with a short piece of brass tube flared at both ends, his hollow rivet 2. Bend the ends down to make ears that rest over the rim of the vase.

Энэ алхмын материал:

Гуулин туузГуулин тууз1 ширхэг
Гуулин хоолойГуулин хоолой1 ширхэг

Шаардлагатай багаж:

Төмөр хөрөөТөмөр хөрөө
Суурин өрөмСуурин өрөм
Өрмийн үзүүрийн иж бүрдэлӨрмийн үзүүрийн иж бүрдэл
Төвлүүлэх цүүцТөвлүүлэх цүүц
Бөмбөрцөг толгойт алхБөмбөрцөг толгойт алх
Хавтгай хошуут хямсааХавтгай хошуут хямсаа
Ширээний хавчаарШирээний хавчаар
4

Punch the holes

Drill holes along each strip, spaced so the flowers will stand apart, just big enough for a cone's narrow part to pass and its lip to rest on the strip.

Шаардлагатай багаж:

Суурин өрөмСуурин өрөм
Өрмийн үзүүрийн иж бүрдэлӨрмийн үзүүрийн иж бүрдэл
Гилбэрийн иж бүрдэлГилбэрийн иж бүрдэл
5

Make the cones

Mark the notebook's blank on brass sheet, cut it out, roll it round a tapered rod or nail into a cone small end down, overlap the seam and solder it. Turn the wide end out into a small lip 6. Slit the narrow end up a short way with a saw so it springs.

Энэ алхмын материал:

Гуулин хуудасГуулин хуудас1 ширхэг
Цагаан тугалга-хар тугалганы гагнуурЦагаан тугалга-хар тугалганы гагнуур1 ширхэг
ФлюсФлюс1 ширхэг

Шаардлагатай багаж:

Тугалган цаас огтлох хайчТугалган цаас огтлох хайч
Дугуй хошуут хавчаарДугуй хошуут хавчаар
Цахилгаан гагнуурын индүүЦахилгаан гагнуурын индүү
Алтны дархны хөрөөАлтны дархны хөрөө
Гилбэрийн иж бүрдэлГилбэрийн иж бүрдэл
6

Fit the cones

Drop a cone into each hole and solder its lip to the strip, or make the hole a little small and press the cone in until the lip sits on the strip, as he allows.

Энэ алхмын материал:

Цагаан тугалга-хар тугалганы гагнуурЦагаан тугалга-хар тугалганы гагнуур1 ширхэг
ФлюсФлюс1 ширхэг

Шаардлагатай багаж:

Цахилгаан гагнуурын индүүЦахилгаан гагнуурын индүү
Хавтгай хошуут хямсааХавтгай хошуут хямсаа
7

Arrange flowers

Set the frame on the vase. Push each stem down through a cone until the flower is at the height you want: the slit end grips it. Lift a flower out and put another in without disturbing the rest.
8

Troubleshooting

Flower holder troubleshooting.

Flow

Loading...
9

History and honest limits

**Francis W. Green** of Brooklyn, US 720,132, dated 10 February 1903, filed 28 November 1902. He claimed "a frame adapted to rest over the mouth of a vase or other receptacle and provided with a number of vertically-disposed tapering spring flower-holders open at both ends". Not built: his adjustable frame ends (Fig. 6). He gives no sizes and does not limit the material: brass, all sizes and the solder are ours.

Материал

5

Шаардлагатай багаж

12

Холбоотой загварууд

Эдгээр загварууд мэдлэг хуваалцдаг — арга техник, материал эсвэл зарчим

CC0 Нийтийн домэйн

Энэ загвар CC0 дор гаргагдсан. Та зөвшөөрөл авахгүйгээр хуулах, өөрчлөх, түгээх, ашиглах боломжтой.

Загвараар дамжуулан бүтээгдэхүүн худалдаж авч Бүтээгчийг дэмжээрэй Бүтээгчийн шимтгэл Борлуулагчаар тогтоосон, эсвэл энэ загварын шинэ хувилбар үүсгэж орлогоо хуваахын тулд өөрийн загварт холбоос болгон оруулна уу.

Хэлэлцүүлэг

(0)

Нэвтрэх хэлэлцүүлэгт нэгдэхийн тулд

Сэтгэгдлүүдийг ачаалж байна...