Хамтын ажиллагаа
УРЛАГ
ГОО САЙХАН БА ЭРҮҮЛ МЭНД
ГАРААР ХИЙСЭН
СОЁЛ БА ТҮҮХ
ҮЗВЭР НААДАМ
БАЙГАЛЬ ОРЧИН
ХООЛ БА УНДАА
УРВУУ ИНЖЕНЕРЧЛЭЛ
ШИНЖЛЭХ УХААН
СПОРТ
ТЕХНОЛОГИ
ӨМСДӨГ ХЭРЭГСЭЛ
Grooved Pulley Cut from Sheet Tin with Alternately Bent Tongues (Boy Mechanic, 1913)
Tinny

Зохиогч

Tinny

14. Арван нэгдүгээр сар 2026US
7
0
0
0
0

Grooved Pulley Cut from Sheet Tin with Alternately Bent Tongues (Boy Mechanic, 1913)

A small round-belt pulley from a disc of tin: slits cut in from the rim to a ring of punch marks, the tongues bent alternately left and right to form a V groove, and a soldered strip across the middle as the hub.
Анхан шат
An hour

Зааварчилгаа

1

How many tongues

Jupyter дэвтэр ачаалж байна…
2

Read the Boy Mechanic

"It is remarkable with how slight care a perfectly true wheel may be made in this manner."
3

Lay out

On tin, draw a circle the size of the groove bottom and a second circle 1/4 in larger in radius around it. Cut out on the large circle.

Энэ алхмын материал:

Цагаан тугалган хуудасЦагаан тугалган хуудас1 ширхэг

Шаардлагатай багаж:

Луужин (компас)Луужин (компас)
Тугалган цаас огтлох хайчТугалган цаас огтлох хайч
4

Dent and slit

Mark slight dents about 1/4 in apart all round the small circle with a prick punch or nail. Cut in from the edge to each dent, stopping when the shears click into it.

Шаардлагатай багаж:

Төвлүүлэх цүүцТөвлүүлэх цүүц
АлхАлх
Тугалган цаас огтлох хайчТугалган цаас огтлох хайч
5

Form the groove

Bend the tongues alternately to right and left and shape them carefully into an even running surface for the belt.

Шаардлагатай багаж:

Хавтгай хошуут хямсааХавтгай хошуут хямсаа
6

Add the hub

Solder or rivet a strip ('handle') across the centre hole and drill through it the same size as the hole. Solder the tongues where needed to stiffen the wheel.

Энэ алхмын материал:

Цагаан тугалган хуудасЦагаан тугалган хуудас1 ширхэг
Цагаан тугалга-хар тугалганы гагнуурЦагаан тугалга-хар тугалганы гагнуур1 ширхэг
Зэсэн риветЗэсэн ривет1 ширхэг

Шаардлагатай багаж:

Гар өрөмГар өрөм
Гагнуурын хэрэгсэлГагнуурын хэрэгсэл
7

Troubleshooting

Tin pulley troubleshooting.

Flow

Loading...
8

History and honest limits

From **The Boy Mechanic, Book 1** (Popular Mechanics, 1913), p. 412, by C. W. Nieman (checked on the archive.org scan boymechanic0000unse_n5a8). Sizes in the table are our examples.

Материал

3

Шаардлагатай багаж

7

Энэ загвараар хийдэг

Холбоотой загварууд

Эдгээр загварууд мэдлэг хуваалцдаг — арга техник, материал эсвэл зарчим

CC0 Нийтийн домэйн

Энэ загвар CC0 дор гаргагдсан. Та зөвшөөрөл авахгүйгээр хуулах, өөрчлөх, түгээх, ашиглах боломжтой.

Загвараар дамжуулан бүтээгдэхүүн худалдаж авч Бүтээгчийг дэмжээрэй Бүтээгчийн шимтгэл Борлуулагчаар тогтоосон, эсвэл энэ загварын шинэ хувилбар үүсгэж орлогоо хуваахын тулд өөрийн загварт холбоос болгон оруулна уу.

Хэлэлцүүлэг

(0)

Нэвтрэх хэлэлцүүлэгт нэгдэхийн тулд

Сэтгэгдлүүдийг ачаалж байна...