Хамтын ажиллагаа
УРЛАГ
ГОО САЙХАН БА ЭРҮҮЛ МЭНД
ГАРААР ХИЙСЭН
СОЁЛ БА ТҮҮХ
ҮЗВЭР НААДАМ
БАЙГАЛЬ ОРЧИН
ХООЛ БА УНДАА
УРВУУ ИНЖЕНЕРЧЛЭЛ
ШИНЖЛЭХ УХААН
СПОРТ
ТЕХНОЛОГИ
ӨМСДӨГ ХЭРЭГСЭЛ
Heat Exchanger: the Double-Pipe Residual Exchanger (Bell, 1923)
Forge

Зохиогч

Forge

4. Арван нэгдүгээр сар 2026NO
12
0
0
0
0

Heat Exchanger: the Double-Pipe Residual Exchanger (Bell, 1923)

A heat exchanger built from stock pipe: runs of one pipe inside another, joined by return bends. Hot residuum from the stills flows one way in the outer pipe while cold crude flows the other way in the inner one, so the crude reaches the stills already warm. Variable: 2 in within 3 in, or 3 in within 4 in, and the number of runs (Bell's Fig. 73 has 16). Expect a transfer rate of 14 to 18 B.t.u. Source: H. S. Bell, American Petroleum Refining (1923), pp. 156-162. Unknown: run length, packing. Picture: Fig. 73 of the book.
Дээд шат
Unknown

Зааварчилгаа

1

Choose the pipe pair

Use 2 in pipe inside 3 in, or 3 in inside 4 in. Plan the number of runs (Fig. 73: 16 runs of 2 in in 3 in). Not given: run length.

Шаардлагатай багаж:

Тодорхойгүй хэмжээсТодорхойгүй хэмжээс
2

Put up the supports

Stand up channel-iron supports and bolt the runs to them, stacked so the bends line up at each end (Fig. 73).

Энэ алхмын материал:

U хэлбэрийн ган хэсэгU хэлбэрийн ган хэсэг1 supports
Зургаан талт толгойт болт - зэрэглэл 8.8Зургаан талт толгойт болт - зэрэглэл 8.81 ширхэг

Шаардлагатай багаж:

Хоолойн түлхүүрХоолойн түлхүүр
3

Assemble the runs

Slide each inner pipe into its outer pipe. At one end join the outer pipes with 3 in return bends whose stuffing boxes the 2 in pipe passes through; make the boxes extra deep, because hot oil penetrates. Join the inner pipes with 2 in return bends with unions. Use heavy fittings; steel ones on the first runs where the oil is 460 °F or hotter.

Энэ алхмын материал:

Ган хоолой (зузаан ханатай, эргэлдэх сүвтэй үзүүртэй)Ган хоолой (зузаан ханатай, эргэлдэх сүвтэй үзүүртэй)1 2 in and 3 in runs
Хоолойн эрээстэй холбоосХоолойн эрээстэй холбоос1 return bends, unions, stuffing boxes
Тодорхойгүй жийрэгТодорхойгүй жийрэг1 stuffing boxes

Шаардлагатай багаж:

Хоолойн түлхүүрХоолойн түлхүүр
4

Connect the headers

Run counter-current: hot residuum from the stills enters the outer pipes from a 3 in header and leaves cold to storage by another; cold oil from storage enters the inner pipes from a 2 in header and leaves hot to the stills. Valve the headers.

Энэ алхмын материал:

Ган хоолой (зузаан ханатай, эргэлдэх сүвтэй үзүүртэй)Ган хоолой (зузаан ханатай, эргэлдэх сүвтэй үзүүртэй)1 headers
Хаалганы хаалтХаалганы хаалт2 ширхэг

Шаардлагатай багаж:

Хоолойн түлхүүрХоолойн түлхүүр

Материал

6

Шаардлагатай багаж

2

CC0 Нийтийн домэйн

Энэ загвар CC0 дор гаргагдсан. Та зөвшөөрөл авахгүйгээр хуулах, өөрчлөх, түгээх, ашиглах боломжтой.

Загвараар дамжуулан бүтээгдэхүүн худалдаж авч Бүтээгчийг дэмжээрэй Бүтээгчийн шимтгэл Борлуулагчаар тогтоосон, эсвэл энэ загварын шинэ хувилбар үүсгэж орлогоо хуваахын тулд өөрийн загварт холбоос болгон оруулна уу.

Хэлэлцүүлэг

(0)

Нэвтрэх хэлэлцүүлэгт нэгдэхийн тулд

Сэтгэгдлүүдийг ачаалж байна...