Хамтын ажиллагаа
УРЛАГ
ГОО САЙХАН БА ЭРҮҮЛ МЭНД
ГАРААР ХИЙСЭН
СОЁЛ БА ТҮҮХ
ҮЗВЭР НААДАМ
БАЙГАЛЬ ОРЧИН
ХООЛ БА УНДАА
УРВУУ ИНЖЕНЕРЧЛЭЛ
ШИНЖЛЭХ УХААН
СПОРТ
ТЕХНОЛОГИ
ӨМСДӨГ ХЭРЭГСЭЛ
Screw Auger: a Steel Blade Twisted Red-Hot, with a Worm, Two Lips and an Eye for the Cross Handle (Holtzapffel, 1846)
Forge

Зохиогч

Forge

14. Арван нэгдүгээр сар 2026NO
10
0
0
0
0

Screw Auger: a Steel Blade Twisted Red-Hot, with a Worm, Two Lips and an Eye for the Cross Handle (Holtzapffel, 1846)

How the common English screw auger was made, from Holtzapffel's Turning and Mechanical Manipulation: a parallel steel blade twisted red-hot, a worm at the point to pull it into the wood, two lips sharpened to cut, and the shaft end forged into an eye for a tightly driven cross handle.
Дээд шат
A day at the forge

Зааварчилгаа

1

Twist count

Jupyter дэвтэр ачаалж байна…
2

Read Holtzapffel

"The ordinary screw auger ... is forged as a parallel blade of steel ... it is twisted red-hot."
3

Forge the blade

Draw a steel bar out into a flat, parallel blade, leaving a round end for the shaft. Width, thickness and length are ours: make the blade as wide as the hole you want.

Энэ алхмын материал:

Багажийн ган савааБагажийн ган саваа1 ширхэг

Шаардлагатай багаж:

Дархны зуухДархны зуух
ДөшДөш
АлхАлх
Дархны хавчаарДархны хавчаар
Фуллер (ховил гаргах төмөр)Фуллер (ховил гаргах төмөр)
4

Twist it red-hot

Heat the blade to red, grip one end in the vice and twist the other with a wrench into an even double spiral. Twist in short heats and keep the pitch even.

Шаардлагатай багаж:

Дархны зуухДархны зуух
Ширээний хавчаарШирээний хавчаар
Дотор эрчлээний бариулДотор эрчлээний бариул
Дархны хавчаарДархны хавчаар
5

Form the worm and lips

File the point into a worm (a small tapered screw, as on a gimlet) that pulls the auger into the work. Shape and sharpen the two corners, or lips, to cut at the very ends and a little up the sides.

Шаардлагатай багаж:

Ширээний хавчаарШирээний хавчаар
Дүрд (гар дүрд)Дүрд (гар дүрд)
6

Forge the eye

Forge the top of the shaft into a ring or eye.

Шаардлагатай багаж:

Дархны зуухДархны зуух
ДөшДөш
АлхАлх
Дархны хавчаарДархны хавчаар
7

Harden and temper (ours)

He gives no hardening. Ours: harden the cutting end and temper it as for other wood-cutting edge tools, then hone the lips.

Шаардлагатай багаж:

Дархны зуухДархны зуух
Хатууруулах тэвшХатууруулах тэвш
БилүүБилүү
8

Fit the cross handle

Shape a hardwood bar and drive it tightly through the eye as a transverse handle.

Энэ алхмын материал:

Хатуу модон банзХатуу модон банз1 ширхэг

Шаардлагатай багаж:

Хос ишт хусуурХос ишт хусуур
АлхАлх
9

Troubleshooting

Screw auger troubleshooting.

Flow

Loading...
10

History and honest limits

From Charles Holtzapffel, **Turning and Mechanical Manipulation**, vol. II (1846), pp. 540, 543 and 545-546 (checked on the archive.org scan turningmechanica02holtuoft). He also describes the single-lip auger: a half-round bar coiled into an open spiral with the flat side outwards, the end shaped like a shell auger. He gives no sizes or heat treatment: those, the tools and the handle wood are ours.

Материал

2

Шаардлагатай багаж

11

CC0 Нийтийн домэйн

Энэ загвар CC0 дор гаргагдсан. Та зөвшөөрөл авахгүйгээр хуулах, өөрчлөх, түгээх, ашиглах боломжтой.

Загвараар дамжуулан бүтээгдэхүүн худалдаж авч Бүтээгчийг дэмжээрэй Бүтээгчийн шимтгэл Борлуулагчаар тогтоосон, эсвэл энэ загварын шинэ хувилбар үүсгэж орлогоо хуваахын тулд өөрийн загварт холбоос болгон оруулна уу.

Хэлэлцүүлэг

(0)

Нэвтрэх хэлэлцүүлэгт нэгдэхийн тулд

Сэтгэгдлүүдийг ачаалж байна...