УРЛАГ
ГОО САЙХАН БА ЭРҮҮЛ МЭНД
ГАРААР ХИЙСЭН
СОЁЛ БА ТҮҮХ
ҮЗВЭР НААДАМ
БАЙГАЛЬ ОРЧИН
ХООЛ БА УНДАА
УРВУУ ИНЖЕНЕРЧЛЭЛ
ШИНЖЛЭХ УХААН
СПОРТ
ТЕХНОЛОГИ
ӨМСДӨГ ХЭРЭГСЭЛ
Post-and-Float Butter-Working Churn: Floats Revolving Astride Fixed Posts
Fyler built one machine to churn the cream and then work the butter, which he called the "Butter-Working Churn."
Orsamus R. Fyler of Brattleboro, Vermont, received US 9,148, dated 27 July 1852, for a cylinder churn whose floats, fixed to a shaft turned by a crank, "go astride of C the posts which stand firmly in the periphery of the churn and have their place as near as practicable to the axis." The posts are "large in their middle portions ... and small at each end"; the floats are "broad at their ends ... and narrow at the portion near the shaft," leaving oval passages. The posts lift out through the door; a slide lengthens the crank for the stiffer butter.
This rung looks at the crank's leverage, then prints the floats and posts, builds the drum, and makes and works butter.
Дунд шат
About 4 hours, plus printing
Зааварчилгаа
1
1
The longer crank
The longer crank
Jupyter дэвтэр ачаалж байна…
2
2
Churning and working in one churn before it
Churning and working in one churn before it
The embedded blueprint presses the butter between rollers and the churn's side. Fyler works it by drawing the floats through it past fixed posts.
3
3
Read US 9,148
Read US 9,148
"This smallness of the posts at each extremity enables them to pass through the butter with less resistance; and this wideness of the floats near the periphery and narrowness near the shaft makes them more efficient in moving and agitating the cream; in carrying more air into the cream; in reclosing the holes which the posts have cut in the butter; and in forcing the butter to pass through nearer the axis when the purchase upon it is greater."
4
4
Print the parts
Print the parts
Print two floats with their oval windows and square hubs, two spindle-shaped posts and the crank arm. Print in PETG at 0.2 mm layers, 30 % infill, 4 walls; wash before first use.
Энэ алхмын материал:
PETG филамент1 ширхэгШаардлагатай багаж:
FDM 3D хэвлэгч5
5
Print the float
6
6
Print the post
7
7
Print the crank arm
8
8
The drum
The drum
Use a round food-grade container about 180 mm across, laid on its side on a pine stand, with a door cut in its upper side. Drill holes in its lower side under the axis, 80 mm apart, and matching holes in the door, so the posts stand across the drum just beside the axis; a stainless skewer through holes above the door holds them.
Энэ алхмын материал:
Хүнсний зэрэглэлийн хадгалах сав1 ширхэг
Нарсан банз1 ширхэг
Зөөлөн ганан дугуй баганз1 ширхэг
#8 × 1" модны шураг1 ширхэгШаардлагатай багаж:
Муруй хөрөө
Утасгүй өрөм
Өрмийн үзүүрийн иж бүрдэл
Гар хөрөө9
9
Shaft, floats and crank
Shaft, floats and crank
Pass a 10 mm square hardwood shaft through the drum's ends and the two floats, set opposite each other so their windows pass the posts. Glue on the crank arm and a dowel handle; a second hole further out lengthens the crank for working the butter.
Энэ алхмын материал:
Хатуу модон гадас1 ширхэг
Модны цавуу1 ширхэг
Арьсан тууз1 ширхэгШаардлагатай багаж:
Гар хөрөө
Элсэн цаас10
10
The build in 3D
The build in 3D
FreeCAD model of this build, not of the patent: the drum cut away to show the two spindle-shaped posts standing across it beside the axis, and the floats with oval windows going astride them, on the stand.
11
11
Churn, then work the butter
Churn, then work the butter
Let the heavy cream stand until it reaches about 15 °C, checked with the thermometer. Pour in 1.5 litres and close the door. Crank steadily; time until the butter comes. Draw off the buttermilk, add cold water and crank on with the long crank hole, so the floats draw the butter past the posts and work it, until the water runs clear. Work in a pinch of salt the same way and weigh the butter.
Энэ алхмын материал:
Өтгөн цөцгий1500 мл
Бүдүүн далайн давс1 ширхэг
Ус1 ширхэгШаардлагатай багаж:
Дотор нь үлдээдэг мэдрэгчтэй термометр
Секунд хэмжигч
Дижитал гал тогооны жин
Зэвэрдэггүй ган том хольц аяга12
12
Floats that catch the posts, a door that lifts
Floats that catch the posts, a door that lifts
Post-and-float churn troubleshooting.
Flow
Loading...
13
13
History and honest limits
History and honest limits
**Orsamus R. Fyler** of Brattleboro, Windham County, Vermont, received US 9,148, dated 27 July 1852 (the drawing sheet reads "O. R. Fyler"). He claimed the combination of floats on a revolving axis with stationary posts near the axis, and of dashers broad at their ends with posts small at each end and large in their middle.
**Honest limits.** A food-grade container and printed parts stand in for his cylinder; the notebook's loads are illustrative, not measured. FDM prints hold food in their layer lines, so wash well and replace when worn. Your times and weights are the result.
Материал
11- 1 ширхэгТүр орлуулагч
- 1 ширхэгТүр орлуулагч
- 1 ширхэгТүр орлуулагч
- 1 ширхэгТүр орлуулагч
- 1 ширхэгТүр орлуулагч
- 1 ширхэгТүр орлуулагч
- 1 ширхэгТүр орлуулагч
- 1 ширхэгТүр орлуулагч
- 1500 млТүр орлуулагч
- 1 ширхэгТүр орлуулагч
- 1 ширхэгТүр орлуулагч
Шаардлагатай багаж
10- Түр орлуулагч
- Түр орлуулагч
- 1 vendor sell this, none ship to you yetТүр орлуулагч
- Түр орлуулагч
- Түр орлуулагч
- Түр орлуулагч
- Түр орлуулагч
- Түр орлуулагч
- Түр орлуулагч
- Түр орлуулагч
Загварын файлууд
4Энэ загвараар хийдэг
Холбоотой загварууд
Эдгээр загварууд мэдлэг хуваалцдаг — арга техник, материал эсвэл зарчим
Roller-and-Float Gathering Churn: Floats That Fold Onto Rollers to Press the Butter
Woody зохиосон
Мод боловсруулалт
40
0
0
0
0
0
Revolving-Drum Toothed-Bar Churn: The Churn Turns Round a Fixed Toothed Bar
Karen зохиосон
ХООЛ БА УНДАА
33
0
0
0
0
0
Centrifugal Buttermilk-Extractor Churn: A Spinning Drum That Throws the Buttermilk Out
Martin зохиосон
ХООЛ БА УНДАА
33
0
0
0
0
0
CC0 Нийтийн домэйн
Энэ загвар CC0 дор гаргагдсан. Та зөвшөөрөл авахгүйгээр хуулах, өөрчлөх, түгээх, ашиглах боломжтой.
Загвараар дамжуулан бүтээгдэхүүн худалдаж авч Бүтээгчийг дэмжээрэй Бүтээгчийн шимтгэл Борлуулагчаар тогтоосон, эсвэл энэ загварын шинэ хувилбар үүсгэж орлогоо хуваахын тулд өөрийн загварт холбоос болгон оруулна уу.