Хамтын ажиллагаа
УРЛАГ
ГОО САЙХАН БА ЭРҮҮЛ МЭНД
ГАРААР ХИЙСЭН
СОЁЛ БА ТҮҮХ
ҮЗВЭР НААДАМ
БАЙГАЛЬ ОРЧИН
ХООЛ БА УНДАА
УРВУУ ИНЖЕНЕРЧЛЭЛ
ШИНЖЛЭХ УХААН
СПОРТ
ТЕХНОЛОГИ
ӨМСДӨГ ХЭРЭГСЭЛ
Quick-Acting Hardwood Bench Vise with Cam and Drop Roll (Boy Mechanic, 1919)
Woody

Зохиогч

Woody

14. Арван нэгдүгээр сар 2026NO
6
0
0
0
0

Quick-Acting Hardwood Bench Vise with Cam and Drop Roll (Boy Mechanic, 1919)

A home-made bench vise entirely of hard wood: the front jaw slides in and out on arm C, a loose roll A drops into place to lock it, a cam lever in front gives the final squeeze, and the pivoted jaw B tilts to grip work whose sides are not parallel.
Дунд шат
A day

Зааварчилгаа

1

Sizes in mm

Jupyter дэвтэр ачаалж байна…
2

Read the Boy Mechanic

"A detail is given of each part, with dimensions, so that it is not difficult to make it from hard wood."
3

Cut the parts to the drawing

Cut every part from hard wood to the sizes in the drawing: the 6-1/2 x 7-3/8 x 3/4 in plate with its 2-5/16 x 2-7/16 in opening, the 6-1/2 x 4 x 1 in slotted plate, the 5 x 5-1/2 x 1/2 in plate, the blocks, the forked piece, the long bar drawn at the bottom (2 x 1-3/8 in; we take it to be arm C) and the cam lever (5-1/2 in between centres, 5/16 in pin hole; its edge view is drawn 5/8 in).

Энэ алхмын материал:

Хатуу модон банзХатуу модон банз1 ширхэг

Шаардлагатай багаж:

Гар хөрөөГар хөрөө
Муруй хөрөөМуруй хөрөө
Модны цүүцнүүдМодны цүүцнүүд
Гар мушгиур өрөм ба үзүүрГар мушгиур өрөм ба үзүүр
4

Turn roll A

Make roll A, a round hardwood roll 1-1/16 in across and 1-7/8 in long.

Энэ алхмын материал:

Хатуу модон гадасХатуу модон гадас1 ширхэг

Шаардлагатай багаж:

Гар хөрөөГар хөрөө
5

Assemble under the bench

Fit the parts under the bench top as the section view shows: arm C slides through the fixed part, roll A sits in its curved seat behind the jaw so it can drop and wedge the arm, jaw B is pivoted so it swings loose, and the cam lever is pinned at the front. Screw and bolt the fixed parts to the bench.

Энэ алхмын материал:

Модны шурагМодны шураг1 ширхэг
Дугуй толгойт боолтДугуй толгойт боолт1 ширхэг

Шаардлагатай багаж:

Гар мушгиур өрөм ба үзүүрГар мушгиур өрөм ба үзүүр
АлхАлх
6

Use it

To open: turn the cam, then lift the front of the vise to free roll A, and slide the front jaw out to the size of the work. Put the work in: roll A drops into place and clamps arm C. Turn the cam to tighten.
7

Troubleshooting

Wooden vise troubleshooting.

Flow

Loading...
8

History and honest limits

From **The Boy Mechanic, Book 3** (Popular Mechanics, 1919), p. 85, by J. C. Hansen (checked on the archive.org scan boymechanic0003unse). The text names only roll A, jaw B, arm C and the cam; build the other pieces as drawn. Metric figures are ours.

Материал

4

Шаардлагатай багаж

5

Холбоотой загварууд

Эдгээр загварууд мэдлэг хуваалцдаг — арга техник, материал эсвэл зарчим

CC0 Нийтийн домэйн

Энэ загвар CC0 дор гаргагдсан. Та зөвшөөрөл авахгүйгээр хуулах, өөрчлөх, түгээх, ашиглах боломжтой.

Загвараар дамжуулан бүтээгдэхүүн худалдаж авч Бүтээгчийг дэмжээрэй Бүтээгчийн шимтгэл Борлуулагчаар тогтоосон, эсвэл энэ загварын шинэ хувилбар үүсгэж орлогоо хуваахын тулд өөрийн загварт холбоос болгон оруулна уу.

Хэлэлцүүлэг

(0)

Нэвтрэх хэлэлцүүлэгт нэгдэхийн тулд

Сэтгэгдлүүдийг ачаалж байна...