Хамтын ажиллагаа
УРЛАГ
ГОО САЙХАН БА ЭРҮҮЛ МЭНД
ГАРААР ХИЙСЭН
СОЁЛ БА ТҮҮХ
ҮЗВЭР НААДАМ
БАЙГАЛЬ ОРЧИН
ХООЛ БА УНДАА
УРВУУ ИНЖЕНЕРЧЛЭЛ
ШИНЖЛЭХ УХААН
СПОРТ
ТЕХНОЛОГИ
ӨМСДӨГ ХЭРЭГСЭЛ

Inclined-Wheel Cam Dog Power: A Dog Turns a Tilted Platform; a Zig-Zag Cam Rocks the Churn Lever
Dexter C. Slater of Laurens, New York, received US 24,338, dated 7 June 1859, for a simple, portable dog power for light machinery such as churns. A tilted platform is fixed square to an inclined shaft; a dog walking on it turns it. On the shaft's upper part a cam has a zig-zag groove right round it; a roller on the end of a lever runs in the groove, so the lever rocks on its pin as the shaft turns, and the work is taken from the lever.
This rung builds it full size for a dog, working a bucket churn's dasher.
Дээд шат
About 3 days, plus printing
Зааварчилгаа
1
1
Slope, strokes and stroke length
Slope, strokes and stroke length
Jupyter дэвтэр ачаалж байна…
2
2
A dog's tread-wheel working a churn, before it
A dog's tread-wheel working a churn, before it
Brush rocked a shaft with tappets on the wheel's rim. Slater rocks a lever with a grooved cam on the wheel's own shaft.
3
3
Read US 24,338
Read US 24,338
"The dog is placed on the wheel G, and rotates it by the movement of his legs, and the cam H, as it rotates gives a vibrating motion to the lever I, from which the power is taken."
4
4
Print the cam segment
Print the cam segment
A quarter of cam H with its share of the zig-zag groove. Print four. PETG, 0.2 mm layers, 50 % infill, 5 walls.
5
5
Print the step block
Print the step block
The 15-degree block on the sill for the shaft's lower bearing. PETG, 0.2 mm layers, 50 % infill, 5 walls.
6
6
Sills, posts and bar D
Sills, posts and bar D
From 70 mm square timber lay sill A 1665 mm long and a front sill 1000 mm long across its end. Stand post B upright and post C beside it, 260 mm apart, on the front sill, and join their tops with bar D running back 660 mm over the shaft's top. Screw the printed step block on sill A 870 mm behind the front sill and bolt a flange bearing on it; bolt a second flange bearing under bar D so a line between the two leans 15 degrees toward the posts.
Энэ алхмын материал:
Зөөлөн мод 70x70 мм6 ширхэг
#10 x 3" модны шураг30 ширхэг
PETG филамент1 ширхэг
Фланцтай холхивч2 ширхэг
Зургаан талт болтны хэрэглэл M104 ширхэгШаардлагатай багаж:
FDM 3D хэвлэгч
Гар хөрөө
Утасгүй өрөм
Өрмийн үзүүрийн иж бүрдэл
Тохируулгатай түлхүүр
Ватерпас
Транспортир
Соронзон хэмжих туузан шугам7
7
Shaft F and wheel G
Shaft F and wheel G
Halve two 70 mm timbers 1300 mm long into a cross for arms b, bore the crossing 30 mm and glue and screw two layers of 18 mm plywood cut to a 1400 mm disc on them as platform b'. Screw pine cleats on top for the dog's grip. Pass a 30 mm steel shaft 1335 mm long through the lower bearing, the wheel and the top bearing, and cross-bolt the wheel to it 250 mm above the step. The platform is square to the shaft, so it tilts 15 degrees.
Энэ алхмын материал:
Зөөлөн мод 70x70 мм2 ширхэг
Фанер хуудас5 ширхэг
Модны цавуу1 ширхэг
#8 × 1" модны шураг120 ширхэг
Нарсан банз1 ширхэг
Ганан гол 30 мм1 ширхэг
Зургаан талт болтны хэрэглэл M101 ширхэгШаардлагатай багаж:
Хөрөө (лобзик)
Гар хөрөө
Утасгүй өрөм
Хүрзэн өрмийн үзүүрийн багц
Хавчаарууд
Тохируулгатай түлхүүр
Элсэн цаас8
8
Cam H, pendant E and lever I
Cam H, pendant E and lever I
Bolt the four cam segments round a hardwood hub on the shaft, 990 to 1150 mm above the step, so the groove runs unbroken round them. Screw two hardwood cheeks down from bar D as pendant E, about 190 mm in front of the cam's face, and drill them 12.5 mm for the fulcrum pin e. Cut a hardwood lever I 30 x 20 mm, 815 mm long, drilled for the pin 174 mm from its inner end. Fit a 28 mm printed or hardwood roller f on a 10 mm stainless stub through the inner end, set it in the groove and bolt the lever between the cheeks.
Энэ алхмын материал:
PETG филамент1 ширхэг
Хатуу модон банз2 ширхэг
Дугуй толгойт боолт8 ширхэг
Хавтгай угаагуур12 ширхэг
Нейлон оруулгатай тогтоох гайка10 ширхэг
Зэвэрдэггүй ган саваа1 ширхэг
#10 x 3" модны шураг6 ширхэгШаардлагатай багаж:
FDM 3D хэвлэгч
Гар хөрөө
Утасгүй өрөм
Өрмийн үзүүрийн иж бүрдэл
Төмөр хөрөө
Тохируулгатай түлхүүр9
9
The churn
The churn
Stand a food-grade 20-litre bucket under the lever's outer end, 600 mm beyond the pin. Hang a 12 mm stainless rod 900 mm long from the lever's end on a bolt, through a slot in the bucket's lid, with a 220 mm dasher of plywood screwed to its foot so it works between about 95 and 340 mm above the floor. Put an eye bolt in post B for the dog's lead.
Энэ алхмын материал:
20 литрийн хувин1 ширхэг
Зэвэрдэггүй ган саваа1 ширхэг
Фанер хуудас1 ширхэг
#8 × 1" модны шураг4 ширхэг
Зургаан талт болтны хэрэглэл M101 ширхэг
Нүдэн боолт1 ширхэгШаардлагатай багаж:
Хөрөө (лобзик)
Утасгүй өрөм
Өрмийн үзүүрийн иж бүрдэл
Тохируулгатай түлхүүр10
10
The build in 3D
The build in 3D
FreeCAD model of this build: the sills, posts B and C and bar D, the tilted shaft in its bearings, the platform on its arms with cleats, the zig-zag cam, the pendant with lever I and its roller in the groove, and the rod and dasher into the bucket. It was checked at eight cam angles.
11
11
Train the dog and churn
Train the dog and churn
Use a harness, never a collar, on a lead to the eye bolt in post B, the dog standing on the platform facing up the slope. Start with short sessions and treats until it walks calmly. Pour about 9 litres of heavy cream at about 15 °C into the bucket, checked with the thermometer, put the lid on and let the dog walk; time it. When the butter comes, pour off the buttermilk, wash the butter in cold water until it runs clear, work in a pinch of salt and weigh it.
Энэ алхмын материал:
Нохойн цээжний оосор1 ширхэг
Усны аяга1 ширхэг
Өтгөн цөцгий9 l
Бүдүүн далайн давс1 ширхэг
Ус1 ширхэгШаардлагатай багаж:
Дотор нь үлдээдэг мэдрэгчтэй термометр
Секунд хэмжигч
Дижитал гал тогооны жин
Зэвэрдэггүй ган том хольц аяга12
12
Troubleshooting
Troubleshooting
Dog-power troubleshooting.
Flow
Loading...
13
13
History and honest limits
History and honest limits
**Dexter C. Slater** of Laurens, Otsego County, New York, US 24,338, 7 June 1859. He meant it to be simple, cheap and portable, almost wholly of wood, with metal strips only to face the groove, and claimed the wheel, shaft, cam and lever together. He gave no sizes: the tilt, the platform, the cam's two zig-zags and throw, the lever and the bucket churn are ours.
Материал
22- 6 ширхэгТүр орлуулагч
- 36 ширхэгТүр орлуулагч
- 2 ширхэгТүр орлуулагч
- 2 ширхэгТүр орлуулагч
- 6 ширхэгТүр орлуулагч
- 5 ширхэгТүр орлуулагч
- 1 ширхэгТүр орлуулагч
- 124 ширхэгТүр орлуулагч
- 1 ширхэгТүр орлуулагч
- 1 ширхэгТүр орлуулагч
- 2 ширхэгТүр орлуулагч
- 8 ширхэгТүр орлуулагч
- 12 ширхэгТүр орлуулагч
- 10 ширхэгТүр орлуулагч
- 1 ширхэгТүр орлуулагч
- 1 ширхэгТүр орлуулагч
- 1 ширхэгТүр орлуулагч
- 1 ширхэгТүр орлуулагч
- 1 ширхэгТүр орлуулагч
- 9 lТүр орлуулагч
- 1 ширхэгТүр орлуулагч
- 1 ширхэгТүр орлуулагч
Шаардлагатай багаж
17- Түр орлуулагч
- Түр орлуулагч
- 1 vendor sell this, none ship to you yetТүр орлуулагч
- Түр орлуулагч
- Түр орлуулагч
- Түр орлуулагч
- Түр орлуулагч
- 1 vendor sell this, none ship to you yetТүр орлуулагч
- 1 vendor sell this, none ship to you yetТүр орлуулагч
- Түр орлуулагч
- Түр орлуулагч
- Түр орлуулагч
- Түр орлуулагч
- Түр орлуулагч
- Түр орлуулагч
- Түр орлуулагч
- Түр орлуулагч
Загварын файлууд
3Энэ загвараар хийдэг
Холбоотой загварууд
Эдгээр загварууд мэдлэг хуваалцдаг — арга техник, материал эсвэл зарчим
CC0 Нийтийн домэйн
Энэ загвар CC0 дор гаргагдсан. Та зөвшөөрөл авахгүйгээр хуулах, өөрчлөх, түгээх, ашиглах боломжтой.
Загвараар дамжуулан бүтээгдэхүүн худалдаж авч Бүтээгчийг дэмжээрэй Бүтээгчийн шимтгэл Борлуулагчаар тогтоосон, эсвэл энэ загварын шинэ хувилбар үүсгэж орлогоо хуваахын тулд өөрийн загварт холбоос болгон оруулна уу.



