Хамтын ажиллагаа
УРЛАГ
ГОО САЙХАН БА ЭРҮҮЛ МЭНД
ГАРААР ХИЙСЭН
СОЁЛ БА ТҮҮХ
ҮЗВЭР НААДАМ
БАЙГАЛЬ ОРЧИН
ХООЛ БА УНДАА
УРВУУ ИНЖЕНЕРЧЛЭЛ
ШИНЖЛЭХ УХААН
СПОРТ
ТЕХНОЛОГИ
ӨМСДӨГ ХЭРЭГСЭЛ

Steel Wool: Shavings Pulled from Wire
Steel wool is a bundle of very fine, flexible, sharp-edged steel filaments, described as a new product in 1896. It is made from low-carbon steel in a process like broaching: heavy steel wire is pulled through a toothed die that shaves off thin, sharp strands. It is graded from coarse 4 and 3 to super fine 0000, whose fibres are about 25 μm (0.001 in) thick, and is used to polish wood and metal, clean cookware and sand surfaces.
Дунд шат
Factory process
Зааварчилгаа
1
1
Pull the wire through the toothed die
Pull the wire through the toothed die
Pull heavy low-carbon steel wire through the toothed die. Each tooth shaves a thin, sharp strand off the wire.
Энэ алхмын материал:
Ган утас1 as requiredШаардлагатай багаж:
Ганган ноос хусах машин2
2
Gather and grade
Gather and grade
Gather the strands into a bundle. The grade, from coarse 4 to super fine 0000, depends on how thick the strands are cut.
Шаардлагатай багаж
1- Түр орлуулагч
Энэ загвараар хийдэг
Холбоотой загварууд
Эдгээр загварууд мэдлэг хуваалцдаг — арга техник, материал эсвэл зарчим
CC0 Нийтийн домэйн
Энэ загвар CC0 дор гаргагдсан. Та зөвшөөрөл авахгүйгээр хуулах, өөрчлөх, түгээх, ашиглах боломжтой.
Загвараар дамжуулан бүтээгдэхүүн худалдаж авч Бүтээгчийг дэмжээрэй Бүтээгчийн шимтгэл Борлуулагчаар тогтоосон, эсвэл энэ загварын шинэ хувилбар үүсгэж орлогоо хуваахын тулд өөрийн загварт холбоос болгон оруулна уу.


