УРЛАГ
ГОО САЙХАН БА ЭРҮҮЛ МЭНД
ГАРААР ХИЙСЭН
СОЁЛ БА ТҮҮХ
ҮЗВЭР НААДАМ
БАЙГАЛЬ ОРЧИН
ХООЛ БА УНДАА
УРВУУ ИНЖЕНЕРЧЛЭЛ
ШИНЖЛЭХ УХААН
СПОРТ
ТЕХНОЛОГИ
ӨМСДӨГ ХЭРЭГСЭЛ
The Hooded Fountain Paint Brush: A Dome Shares the Paint Between Both Sides
Martin

Зохиогч

Martin

6. Аравдугаар сар 2026NO
33
0
0
0
0

The Hooded Fountain Paint Brush: A Dome Shares the Paint Between Both Sides

Paint fed into the middle of a brush clogs its head, and one side of the bristles runs dry. Franklin E. Fornwalt of Harrisburg, Pennsylvania, received US 842,644, patented 29 January 1907, for a fountain brush "for applying paint": a tin holder clamped over the brush carries a reservoir whose floor has a row of apertures under a hollow turning valve, and below it a hood whose dome sends equal paint to both sides of the bristles. This rung works out the flow a brush needs, then folds the holder from aluminium sheet over a 120 mm brush and measures the paint it lays on each side of a stroke.
Дунд шат
About 5 hours

Зааварчилгаа

1

Paint the brush needs

Jupyter дэвтэр ачаалж байна…
2

A turned perforated tube before it

The embedded blueprint turns a perforated tube to change how water leaves a brush. Fornwalt turns a perforated valve to open or close a row of holes over a hood.
3

Read US 842,644

"In virtue of the provision of the said hood D paint is effectually prevented from getting on the brush-head b, and at the same time liability of the brush becoming choked and impaired is reduced to a minimum. It will also be apparent that the hood D conveys an equal quantity of paint to each side of the body of bristles a and assures the paint reaching the sides of the body of bristles in the form of thin layers, which obviously contributes materially to the efficiency of the fountain-brush as a whole."
4

Fold the tank

Fold aluminium sheet into a box 160 × 60 × 70 mm with a lid. Rivet the seams and seal them inside with silicone. Cut a 25 mm filling hole in the lid.

Энэ алхмын материал:

Хөнгөн цагаан хуудасХөнгөн цагаан хуудас1 ширхэг
Татах риветТатах ривет1 ширхэг
Силиконон битүүлэгчСиликонон битүүлэгч1 ширхэг

Шаардлагатай багаж:

Тугалган цаас огтлох хайчТугалган цаас огтлох хайч
Хавтгай хошуут хямсааХавтгай хошуут хямсаа
Ширээний хавчаарШирээний хавчаар
Ривет буугийн багцРивет буугийн багц
Утасгүй өрөмУтасгүй өрөм
Өрмийн үзүүрийн иж бүрдэлӨрмийн үзүүрийн иж бүрдэл
Нүх хөрөөдөгч багцНүх хөрөөдөгч багц
Арьсан ажлын бээлийАрьсан ажлын бээлий
5

Drill the floor

Drill six 3 mm holes along the floor's centre line, 20 mm apart.

Шаардлагатай багаж:

Утасгүй өрөмУтасгүй өрөм
Өрмийн үзүүрийн иж бүрдэлӨрмийн үзүүрийн иж бүрдэл
Арилдаггүй маркерАрилдаггүй маркер
ШугамШугам
6

Make the turning valve

Cut 200 mm of 10 mm copper tube. Drill six 3 mm holes in a line to match the floor's, and file a 6 mm slot along the opposite side. Pass it through both end walls just above the floor and bend one end into a crank.

Энэ алхмын материал:

Зэс хоолойЗэс хоолой1 ширхэг

Шаардлагатай багаж:

Төмөр хөрөөТөмөр хөрөө
Утасгүй өрөмУтасгүй өрөм
Өрмийн үзүүрийн иж бүрдэлӨрмийн үзүүрийн иж бүрдэл
Дүрд (гар дүрд)Дүрд (гар дүрд)
Ширээний хавчаарШирээний хавчаар
7

Fold the hood

Bend an aluminium strip into a ridge with 40° sides and rivet it under the floor, its peak under the holes.

Энэ алхмын материал:

Хөнгөн цагаан хуудасХөнгөн цагаан хуудас1 ширхэг
Татах риветТатах ривет1 ширхэг

Шаардлагатай багаж:

Ширээний хавчаарШирээний хавчаар
Ривет буугийн багцРивет буугийн багц
8

Clamp on the brush

Rivet two side skirts below the tank. Drill them and a 120 mm brush's stock for two M6 bolts, and clamp the brush between the skirts with nuts so their lower edges rest on the bristles.

Энэ алхмын материал:

Зургаан талт болтны цуглуулгаЗургаан талт болтны цуглуулга1 ширхэг
Зургаан талт эрэгЗургаан талт эрэг1 ширхэг
Хавтгай угаагуурХавтгай угаагуур1 ширхэг
Татах риветТатах ривет1 ширхэг

Шаардлагатай багаж:

Утасгүй өрөмУтасгүй өрөм
Өрмийн үзүүрийн иж бүрдэлӨрмийн үзүүрийн иж бүрдэл
Тохируулгатай түлхүүрТохируулгатай түлхүүр
Бийрний багцБийрний багц
9

The patent drawing

US 842,644 drawing sheet, public domain (expired patent).
Алхам 9 - Image 1
10

Paint and weigh

Fill the tank with thinned acrylic paint. Weigh a plywood board, open the valve half, and paint one 1 m stroke each way. Weigh it again; compare how wet each side of the bristles is.
Алхам 10 - Image 1

Энэ алхмын материал:

Акрилан будгийн багцАкрилан будгийн багц1 ширхэг
УсУс1 ширхэг
Фанер хуудасФанер хуудас1 ширхэг

Шаардлагатай багаж:

Дижитал гал тогооны жинДижитал гал тогооны жин
Соронзон хэмжих туузан шугамСоронзон хэмжих туузан шугам
Секунд хэмжигчСекунд хэмжигч
11

A brush that clogs, floods or paints one side

Hooded fountain paint brush troubleshooting.

Flow

Loading...
12

History and honest limits

**Franklin E. Fornwalt** of Harrisburg, Pennsylvania, filed US 842,644 on 28 September 1906; it was patented 29 January 1907. His holder is preferably tin; bolts through the brush head with thumb nuts press the side walls in against the bristles, and removing them lets the brush be replaced. A connection may take a hose from a paint supply or compressed air. A right-angled form paints vertical surfaces, feeding the upper side of the bristles only. **Honest limits.** Riveted aluminium stands in for his tin, and plain nuts for his thumb nuts. Your weights are the result.

Материал

10

Шаардлагатай багаж

17

CC0 Нийтийн домэйн

Энэ загвар CC0 дор гаргагдсан. Та зөвшөөрөл авахгүйгээр хуулах, өөрчлөх, түгээх, ашиглах боломжтой.

Загвараар дамжуулан бүтээгдэхүүн худалдаж авч Бүтээгчийг дэмжээрэй Бүтээгчийн шимтгэл Борлуулагчаар тогтоосон, эсвэл энэ загварын шинэ хувилбар үүсгэж орлогоо хуваахын тулд өөрийн загварт холбоос болгон оруулна уу.

Хэлэлцүүлэг

(0)

Нэвтрэх хэлэлцүүлэгт нэгдэхийн тулд

Сэтгэгдлүүдийг ачаалж байна...