Хамтын ажиллагаа
УРЛАГ
ГОО САЙХАН БА ЭРҮҮЛ МЭНД
ГАРААР ХИЙСЭН
СОЁЛ БА ТҮҮХ
ҮЗВЭР НААДАМ
БАЙГАЛЬ ОРЧИН
ХООЛ БА УНДАА
УРВУУ ИНЖЕНЕРЧЛЭЛ
ШИНЖЛЭХ УХААН
СПОРТ
ТЕХНОЛОГИ
ӨМСДӨГ ХЭРЭГСЭЛ
Hand Files Cut With a Double-Edged Hammer and Tempered in Burnt Ox Horn and Salt (Theophilus, 12th Century)
Forge

Зохиогч

Forge

14. Арван нэгдүгээр сар 2026NO
8
0
0
0
0

Hand Files Cut With a Double-Edged Hammer and Tempered in Burnt Ox Horn and Salt (Theophilus, 12th Century)

How a medieval metalworker made his own files, from Theophilus's De Diversis Artibus (12th century): files of steel, or of soft iron faced with steel, forged to size, smoothed and cut with a double-edged hammer or cutting iron, then hardened by sprinkling them glowing with burnt ox horn and salt and quenching. Small soft-iron files are packed in lard, goatskin and clay instead.
Дээд шат
About 1 day per few files

Зааварчилгаа

1

The hardening mix

Jupyter дэвтэр ачаалж байна…
2

Read De Diversis Artibus, Book III

"Files are made from pure steel, large and moderately sized, triangular and round. Others also are made which are stronger in the middle, from soft iron inside, but outwardly they are covered with steel."
3

Forge and smooth the blanks

Beat steel (or soft iron covered with steel) to the size and shape wanted: large or moderate, triangular or round; for small files, square, round, triangular or thin. Smooth them on a planing instrument (a filing or scraping bed).

Энэ алхмын материал:

Нүүрстөрөгчит ган саваа (0.6 % C)Нүүрстөрөгчит ган саваа (0.6 % C)1 ширхэг
Давтсан төмөр гулдмайДавтсан төмөр гулдмай1 ширхэг

Шаардлагатай багаж:

Дархны зуухДархны зуух
ХөөрөгХөөрөг
ДөшДөш
АлхАлх
Дархны хямсааДархны хямсаа
Дүрд (гар дүрд)Дүрд (гар дүрд)
4

Cut the teeth

Mark out the teeth with a hammer sharp on both sides, or with the cutting iron, until the file is cut all over.

Шаардлагатай багаж:

АлхАлх
Зүлгүүрийн шүд цавчих цүүцЗүлгүүрийн шүд цавчих цүүц
ДөшДөш
Ширээний хавчаарШирээний хавчаар
5

Temper with horn and salt

Burn an ox horn in the fire, scrape it, mix it with a third part of salt and grind it hard. Heat the file until it glows, sprinkle the mixture over it everywhere, lay hot coals on and blow quickly over the whole without letting the coating fall off; then draw it out and quench it evenly in water, and dry it slightly over the fire. He tempers all steel things this way.

Энэ алхмын материал:

Үхрийн эвэрҮхрийн эвэр1 ширхэг
ДавсДавс1 ширхэг

Шаардлагатай багаж:

Дархны зуухДархны зуух
ХөөрөгХөөрөг
ПипеткПипетк
Дархны хямсааДархны хямсаа
Хатууруулах тэвшХатууруулах тэвш
6

Or pack small soft-iron files

For small soft-iron files, after cutting, anoint them with the grease of an old hog, bind them with small straps of buck-goat skin tied with flaxen thread, and cover each with beaten clay, leaving the handles (tangs) bare. Dry them, put them in the fire and blow strongly until the skin is burned, take them quickly out of the clay, quench evenly in water, and dry them at the fire.

Энэ алхмын материал:

Гахайн өөх (бөөрний болон нурууны өөх)Гахайн өөх (бөөрний болон нурууны өөх)1 ширхэг
Ямааны арьсЯмааны арьс1 ширхэг
Маалингын утасМаалингын утас1 ширхэг
ШаварШавар1 ширхэг

Шаардлагатай багаж:

Дархны зуухДархны зуух
ХөөрөгХөөрөг
Дархны хямсааДархны хямсаа
Хатууруулах тэвшХатууруулах тэвш
Арьсны хутгаАрьсны хутга
7

Troubleshooting

File troubleshooting.

Flow

Loading...
8

History and honest limits

From Theophilus Presbyter, **De Diversis Artibus** (12th century), Book III, chapters XVII-XIX, translated by Robert Hendrie (1847) (checked on the archive.org scan essayuponvarious00hend, pp. 223-225). He gives no sizes, temperatures or tooth spacing. The tools and the case-hardening explanation are ours.

Материал

8

Шаардлагатай багаж

11

Холбоотой загварууд

Эдгээр загварууд мэдлэг хуваалцдаг — арга техник, материал эсвэл зарчим

CC0 Нийтийн домэйн

Энэ загвар CC0 дор гаргагдсан. Та зөвшөөрөл авахгүйгээр хуулах, өөрчлөх, түгээх, ашиглах боломжтой.

Загвараар дамжуулан бүтээгдэхүүн худалдаж авч Бүтээгчийг дэмжээрэй Бүтээгчийн шимтгэл Борлуулагчаар тогтоосон, эсвэл энэ загварын шинэ хувилбар үүсгэж орлогоо хуваахын тулд өөрийн загварт холбоос болгон оруулна уу.

Хэлэлцүүлэг

(0)

Нэвтрэх хэлэлцүүлэгт нэгдэхийн тулд

Сэтгэгдлүүдийг ачаалж байна...