Хамтын ажиллагаа
УРЛАГ
ГОО САЙХАН БА ЭРҮҮЛ МЭНД
ГАРААР ХИЙСЭН
СОЁЛ БА ТҮҮХ
ҮЗВЭР НААДАМ
БАЙГАЛЬ ОРЧИН
ХООЛ БА УНДАА
УРВУУ ИНЖЕНЕРЧЛЭЛ
ШИНЖЛЭХ УХААН
СПОРТ
ТЕХНОЛОГИ
ӨМСДӨГ ХЭРЭГСЭЛ
Silver Solder of Silver and Red Copper With a Burnt Wine-Stone Flux (Theophilus, 12th Century)
Forge

Зохиогч

Forge

14. Арван нэгдүгээр сар 2026NO
5
0
0
0
0

Silver Solder of Silver and Red Copper With a Burnt Wine-Stone Flux (Theophilus, 12th Century)

How Theophilus soldered silver in the 12th century: an alloy of two parts pure silver and a third part red copper, rasped to filings, laid on a joint painted with a flux of burnt wine-stone (tartar) ground with water and salt, and flowed in the coals with a long gentle blast.
Дунд шат
About half a day

Зааварчилгаа

1

The alloy

Jupyter дэвтэр ачаалж байна…
2

Read De Diversis Artibus, Book III

"Weigh two parts of pure silver, and a third (part) of red copper, and mix and finely rasp into a clean vessel."
3

Make the solder

Weigh two parts of pure silver and a third part of red copper, melt them together, and rasp the alloy finely into a clean vessel; keep the filings in a quill.

Энэ алхмын материал:

Цэвэр мөнгөЦэвэр мөнгө1 ширхэг
ЗэсЗэс1 ширхэг

Шаардлагатай багаж:

Дэнсний жинлүүрДэнсний жинлүүр
ТигельТигель
Тигелийн хямсааТигелийн хямсаа
Дархны зуухДархны зуух
ХөөрөгХөөрөг
Бүдүүн сэвсБүдүүн сэвс
Өдөн ҮзэгӨдөн Үзэг
4

Make the flux

Take wine-stone from a vessel in which good wine has stood a long time, tie pieces in a cloth and put it in the fire until no more vapour comes from it. When cool, blow off the cloth ash and grind the burnt stone in a copper vessel with a round mallet, mixing in water and salt until it is as thick as lees.

Энэ алхмын материал:

Түүхий дарсны чулууТүүхий дарсны чулуу1 ширхэг
Хөвөн даавууХөвөн даавуу1 ширхэг
ДавсДавс1 ширхэг

Шаардлагатай багаж:

Дархны зуухДархны зуух
20 литрийн хувин20 литрийн хувин
Модон алхМодон алх
5

Solder

With a thin piece of wood paint the flux round the joint inside and out, shake the filed solder over it with a small iron, and dry it. Paint more flux on, more thickly than before, put the work in the fire, cover it with coals and blow gently with a long breath until the solder has melted. Take it out, let it cool slightly and wash it. If the joint is not firm, do it again. Then file and scrape it smooth.

Шаардлагатай багаж:

Дархны зуухДархны зуух
ХөөрөгХөөрөг
Тигелийн хямсааТигелийн хямсаа
Дүрд (гар дүрд)Дүрд (гар дүрд)
6

Troubleshooting

Soldering troubleshooting.

Flow

Loading...
7

History and honest limits

From Theophilus, **De Diversis Artibus**, Book III, chapter XXXI, translated by Robert Hendrie (1847) (checked on the archive.org scan essayuponvarious00hend, pp. 241-243). "A third (part)" can be read two ways; both are shown. Melting the alloy before rasping, the tools and the diagram are ours.

Материал

5
  • 1 ширхэг
    Түр орлуулагч
  • 1 ширхэг
    Түр орлуулагч
  • Түр орлуулагч
  • Түр орлуулагч
  • 1 ширхэг
    Түр орлуулагч

Шаардлагатай багаж

10

CC0 Нийтийн домэйн

Энэ загвар CC0 дор гаргагдсан. Та зөвшөөрөл авахгүйгээр хуулах, өөрчлөх, түгээх, ашиглах боломжтой.

Загвараар дамжуулан бүтээгдэхүүн худалдаж авч Бүтээгчийг дэмжээрэй Бүтээгчийн шимтгэл Борлуулагчаар тогтоосон, эсвэл энэ загварын шинэ хувилбар үүсгэж орлогоо хуваахын тулд өөрийн загварт холбоос болгон оруулна уу.

Хэлэлцүүлэг

(0)

Нэвтрэх хэлэлцүүлэгт нэгдэхийн тулд

Сэтгэгдлүүдийг ачаалж байна...