Хамтын ажиллагаа
УРЛАГ
ГОО САЙХАН БА ЭРҮҮЛ МЭНД
ГАРААР ХИЙСЭН
СОЁЛ БА ТҮҮХ
ҮЗВЭР НААДАМ
БАЙГАЛЬ ОРЧИН
ХООЛ БА УНДАА
УРВУУ ИНЖЕНЕРЧЛЭЛ
ШИНЖЛЭХ УХААН
СПОРТ
ТЕХНОЛОГИ
ӨМСДӨГ ХЭРЭГСЭЛ

Redditch Steel Sewing Needles: Point, Stamp, Eye, Harden, Scour and Drill (Tomlinson, 1854)
How the Redditch needle mills of the 1850s made steel sewing needles, from Tomlinson's Cyclopaedia of Useful Arts: wire cut in double lengths, pointed on grit stones, stamped and punched for two eyes, split, hardened and tempered blue, then scoured bright for days in rolled canvas bundles with emery and oil.
Дээд шат
About two weeks per lot (scouring alone 50-60 hours)
Зааварчилгаа
1
1
Gauge and rates
Gauge and rates
Jupyter дэвтэр ачаалж байна…
2
2
Read the Cyclopaedia of Useful Arts
Read the Cyclopaedia of Useful Arts
"The raw material, as received from Birmingham or Sheffield, consists of soft, clean steel wire."
3
3
Cut and straighten
Cut and straighten
Cut soft steel wire into lengths of two needles each, about 3 in (76 mm) for size No. 6. Collect several thousand inside two heavy iron rings, heat them to redness, lay them on an iron plate and roll them back and forth with a smooth file between the rings until the grating sound softens: they are then straight.
Энэ алхмын материал:
Ган утас1 ширхэгШаардлагатай багаж:
Хажуугийн утас таслагч хямсаа
Дархны зуух
Төмөр хавтан
Дүрд (гар дүрд)
Дархны хавчаар4
4
Point both ends
Point both ends
Grind both ends on a fast grit stone (10-20 in across, by needle size). Spread the wires in the left hand, hold them with the right and roll them so each forms a true cone. Dip them in water to keep them cool. The dust of grit and steel causes grinder's asthma: he urged a mask and a fan-driven ventilating shaft; wear a dust mask and extract the dust.
Шаардлагатай багаж:
Эргэдэг хурцлах чулуу
Хатууруулах тэвш
Тоосны маск5
5
Stamp the eyes
Stamp the eyes
Lay each blank on the iron bed of the stamp (half a die, on a stone block), push it to the stop, and drop the 12 lb hammer with the other half of the die by its foot lever. One blow gives the grooves and a dent for each of the two eyes.
Шаардлагатай багаж:
Хэвтэй унадаг алх6
6
Punch the eyes
Punch the eyes
In a small hand press with two steel points the size of the eye, punch both eyes through. File off the burr from many at once spitted on two fine wires through the eyes, then bend the row back and forth between the spits so it breaks into two rows of single needles. Grip each row in a hand vice and file the heads to shape.
Шаардлагатай багаж:
Цоолох шахуурга
Дүрд (гар дүрд)
Гар өрөмдөх толгой7
7
Straighten soft
Straighten soft
Roll each bent needle on a flat steel plate with a smooth steel file turned up at each end; two or three turns straighten it.
Шаардлагатай багаж:
Төмөр хавтан
Дүрд (гар дүрд)8
8
Harden and temper
Harden and temper
Spread the needles thickly on narrow iron plates, heat them to red in the furnace and plunge them into cold water or oil. Dry them, then heat them on an iron plate over a fire, stirring them with small iron shovels until a blue oxide forms, and take them off at once. Roll them on a steel slab to find the bent ones and straighten those with a hammer on a small anvil.
Энэ алхмын материал:
Машины тос1 ширхэгШаардлагатай багаж:
Дархны зуух
Төмөр хавтан
Хатууруулах тэвш
Дөш
Алх9
9
Scour bright
Scour bright
Lay strings across an open wooden tray, a stout canvas on them, and 40,000-50,000 needles lengthwise in it. Sprinkle emery, oil and soft soap, roll it up and wind strong twine round it into a bundle 2-3 ft long and 3-4 in thick. Work it under the weighted slab of a scouring machine, 20-30 strokes a minute, for 50-60 hours (7 or 8 days for the best needles). Every 8 hours renew the canvas, add fresh polishing putty and oil, and wash the needles in soap and water.
Энэ алхмын материал:
Брезент даавуу1 ширхэг
Зүлгүүрийн (эмери) нунтаг1 ширхэг
Машины тос1 ширхэг
Саван1 ширхэг
Өнгөлөх нунтаг1 ширхэг
Хөвөн уяа1 ширхэгШаардлагатай багаж:
Жижиг эд анги үрж гялалзуулах машин10
10
Head, drill and finish
Head, drill and finish
Turn all heads one way: press a finger wrapped in rag into the heap and the points that stick draw out. Reject broken ones. Anneal the eyes by bringing a red-hot plate near them until dark blue, then countersink and smooth each eye on both sides with a small fast three-sided steel drill. Finish the points on a small turning hone-stone and polish on wooden wheels covered in buff leather with polishing paste.
Энэ алхмын материал:
Өнгөлгөөний зуурмаг1 ширхэгШаардлагатай багаж:
Төмөр хавтан
Суурин өрөм
Билүү
Өнгөлгөөний дугуй11
11
Troubleshooting
Troubleshooting
Needle troubleshooting.
Flow
Loading...
12
12
History and honest limits
History and honest limits
From Charles Tomlinson (ed.), **Cyclopaedia of Useful Arts** (1854), vol. II, "Needles" (checked on the archive.org scan cyclopdiaofuse02tomlrich, pp. 321-325). He describes a whole mill; quantities scale down. Metric figures, the dust mask and the tool heads are ours.
Материал
8- 1 ширхэгТүр орлуулагч
- 2 ширхэгТүр орлуулагч
- 1 ширхэгТүр орлуулагч
- 1 ширхэгТүр орлуулагч
- 1 ширхэгТүр орлуулагч
- 1 ширхэгТүр орлуулагч
- 1 ширхэгТүр орлуулагч
- 1 ширхэгТүр орлуулагч
Шаардлагатай багаж
17- Түр орлуулагч
- Түр орлуулагч
- Түр орлуулагч
- Түр орлуулагч
- Түр орлуулагч
- Түр орлуулагч
- Түр орлуулагч
- Түр орлуулагч
- Түр орлуулагч
- Түр орлуулагч
- Түр орлуулагч
- Түр орлуулагч
- Түр орлуулагч
- Түр орлуулагч
- Түр орлуулагч
- Түр орлуулагч
- Түр орлуулагч
Энэ загвараар хийдэг
Холбоотой загварууд
Эдгээр загварууд мэдлэг хуваалцдаг — арга техник, материал эсвэл зарчим
CC0 Нийтийн домэйн
Энэ загвар CC0 дор гаргагдсан. Та зөвшөөрөл авахгүйгээр хуулах, өөрчлөх, түгээх, ашиглах боломжтой.
Загвараар дамжуулан бүтээгдэхүүн худалдаж авч Бүтээгчийг дэмжээрэй Бүтээгчийн шимтгэл Борлуулагчаар тогтоосон, эсвэл энэ загварын шинэ хувилбар үүсгэж орлогоо хуваахын тулд өөрийн загварт холбоос болгон оруулна уу.


