Хамтын ажиллагаа
УРЛАГ
ГОО САЙХАН БА ЭРҮҮЛ МЭНД
ГАРААР ХИЙСЭН
СОЁЛ БА ТҮҮХ
ҮЗВЭР НААДАМ
БАЙГАЛЬ ОРЧИН
ХООЛ БА УНДАА
УРВУУ ИНЖЕНЕРЧЛЭЛ
ШИНЖЛЭХ УХААН
СПОРТ
ТЕХНОЛОГИ
ӨМСДӨГ ХЭРЭГСЭЛ

Wash Bottle: a Laboratory Wash Bottle with a Slit Valve (Boy Mechanic, 1915)
A wide-mouthed bottle with a three-tube stopper that squirts a steady stream of water for rinsing glassware and washing precipitates. Blow into one tube to pressurise it; a slit rubber valve holds the pressure, and your thumb on a relief tube starts and stops the jet at once.
Source: The Boy Mechanic, Book 2 (1915), p. 458. Unknown: sizes. Picture: the book's sketch.
Анхан шат
Unknown
Зааварчилгаа
1
1
Bore the stopper
Bore the stopper
Fit a stopper to a large-mouthed bottle and bore three holes through it for the tubes.
Энэ алхмын материал:
Шилэн шил (тунгалаг)1 large mouth
Резинэн бөглөө1 ширхэгШаардлагатай багаж:
Үйс цоолуур2
2
Make the tubes
Make the tubes
Use brass or glass tubes. Bend the nozzle tube E so it reaches the bottom and points out over the side (sketch); the air tube A and relief tube D only pass through the stopper.
Энэ алхмын материал:
Шилэн хоолой3 ширхэгШаардлагатай багаж:
Ширээний шил үлээх бамбар3
3
Fit the slit valve
Fit the slit valve
On the lower end of air tube A fit a thick piece of rubber tubing B, stoppered at its bottom end, and cut a slit C in its side: blown air opens it, and it closes again to hold the pressure. Push the three tubes through the stopper and fit it in the bottle. To use: fill with water, blow into A, then close D with your thumb; water jets steadily from E and stops the moment the thumb lifts.
Энэ алхмын материал:
Резинэн хоолой1 thick, short pieceШаардлагатай багаж:
Гар урлалын хутгаМатериал
4- 1 large mouthТүр орлуулагч
- 1 ширхэгТүр орлуулагч
- 3 ширхэгТүр орлуулагч
- 1 thick, short pieceТүр орлуулагч
Шаардлагатай багаж
3- Түр орлуулагч
- Түр орлуулагч
- Түр орлуулагч
Энэ загвараар хийдэг
CC0 Нийтийн домэйн
Энэ загвар CC0 дор гаргагдсан. Та зөвшөөрөл авахгүйгээр хуулах, өөрчлөх, түгээх, ашиглах боломжтой.
Загвараар дамжуулан бүтээгдэхүүн худалдаж авч Бүтээгчийг дэмжээрэй Бүтээгчийн шимтгэл Борлуулагчаар тогтоосон, эсвэл энэ загварын шинэ хувилбар үүсгэж орлогоо хуваахын тулд өөрийн загварт холбоос болгон оруулна уу.
