Хамтын ажиллагаа
УРЛАГ
ГОО САЙХАН БА ЭРҮҮЛ МЭНД
ГАРААР ХИЙСЭН
СОЁЛ БА ТҮҮХ
ҮЗВЭР НААДАМ
БАЙГАЛЬ ОРЧИН
ХООЛ БА УНДАА
УРВУУ ИНЖЕНЕРЧЛЭЛ
ШИНЖЛЭХ УХААН
СПОРТ
ТЕХНОЛОГИ
ӨМСДӨГ ХЭРЭГСЭЛ

Water-Cooled Copper Mould: Two Halves with Cast-In Pipes, in a Trunnion Yoke (Peirce, US 2,048,024, 1936)
A mould for metals that conduct heat well: two thick copper blocks, each cast round a grid of copper pipes that carry cooling water. They are bolted face to face, so the cavity can be machined accurately, and carried in a steel yoke on hollow trunnions that feed the water. A latched gate closes the bottom. The casting can be dumped out of the top by turning the yoke, or out of the bottom by opening the gate.
Result: a water-cooled copper mould that freezes the metal fast and can be taken apart, machined and cleaned.
Source: W. H. Peirce (American Smelting and Refining), US 2,048,024 (1936). Unknown: sizes and the copper grade. Picture: the patent drawing.
Дээд шат
Unknown
Зааварчилгаа
1
1
Cast the two halves round their pipes
Cast the two halves round their pipes
For each half, assemble copper pipes into a grid: a horizontal inlet pipe at the bottom, an outlet pipe at the top, and several vertical pipes joining them. Any steam formed in casting then rises to the outlet. Cast a block of copper of about the mould's shape over the grid. Ours: copper ingot melted in a crucible furnace. Not given: sizes, the copper grade.
Энэ алхмын материал:
Зэс хоолой1 cooling-pipe grids
Зэс гулдмай1 mould blocksШаардлагатай багаж:
Тигелийн зуух
Тодорхойгүй хэмжээс2
2
Machine the cavity
Machine the cavity
Machine the inner faces of the two halves to form the casting space, accurately. The recesses can be cut to different depths, for example five-eighths of the casting's width in one half and three-eighths in the other. Bolt the halves together face to face.
Энэ алхмын материал:
Тодорхойгүй металл1 boltsШаардлагатай багаж:
Фрезийн машин
Суурин өрөм
Эрчлээ огтлох иж бүрдэл3
3
Make the yoke and the bottom gate
Make the yoke and the bottom gate
Cast a U-shaped steel yoke in one piece: two hollow ends with trunnions in line, joined by struts that carry the mould, bolted on. Make a bottom gate machined to fit tight under the mould, with its own cooling passage. Mount it on a gate arm keyed to a shaft across the yoke, its wedge end pinned in a V slot so the gate rocks to align. Add a lever on the shaft and a latch on an eccentric with a handle, to lock the gate up tight. Ours: steel ingot for the yoke casting.
Энэ алхмын материал:
Ган гулдмай1 yoke casting
Тодорхойгүй металл1 gate, arm, shaft, lever, latchШаардлагатай багаж:
Тигелийн зуух
Фрезийн машин4
4
Pipe the cooling water
Pipe the cooling water
Bring water in through a pipe in the centre of one trunnion into the hollow yoke end, and from there by fitted pipes to the inlets of both halves and by a flexible metal hose to the gate. Lead the outlets to the other hollow end, and out through a pipe in the centre of the other trunnion, so the water keeps flowing while the yoke turns. Not given: the hose, the flow.
Энэ алхмын материал:
Зэс хоолой1 inlet and outlet pipes
Тодорхойгүй материал1 metallic hosesШаардлагатай багаж:
Ус5
5
Cast and dump a cake
Cast and dump a cake
Latch the gate shut, coat the cavity with a mould dressing such as graphite, circulate the water and fill the mould with molten metal. When the cake has cooled, turn the yoke on its trunnions so it slides out of the top, or trip the latch so the gate swings back and it drops out of the bottom. Unbolt the halves now and then to clean them or machine their faces true again.
Шаардлагатай багаж:
Бал чулууны нунтаг
УсМатериал
5- 1 inlet and outlet pipesТүр орлуулагч
- 1 mould blocksТүр орлуулагч
- 1 gate, arm, shaft, lever, latchТүр орлуулагч
- 1 yoke castingТүр орлуулагч
- 1 metallic hosesТүр орлуулагч
Шаардлагатай багаж
7- Түр орлуулагч
- Түр орлуулагч
- Түр орлуулагч
- Түр орлуулагч
- Түр орлуулагч
- Түр орлуулагч
- Түр орлуулагч
Холбогдсон загварын материал

Аюултай
10% хамаарал
Electrolytic Copper and Refinery Slimes: Blister Anodes Dissolved in Bluestone and Acid (Barnett, in Peters 1905)
Charlie зохиосон
Металл боловсруулалт
10
0
0
0
1
0

10% хамаарал
Copper and Brass Tube Drawn from Strip
Forge зохиосон
Металл боловсруулалт
49
0
0
0
3
0

10% хамаарал
Crucible Furnace: the Brass Founder's Sunk Coke Air Furnace (Larkin, 1907)
Forge зохиосон
Зуух
14
0
0
0
1
0

10% хамаарал
Universal Milling Machine
Martin зохиосон
ГАРААР ХИЙСЭН
57
0
0
0
1
0

10% хамаарал
Graphite Powder Ground from Plumbago
Mary зохиосон
Органик бус
15
0
0
0
2
0
Энэ загвараар хийдэг
CC0 Нийтийн домэйн
Энэ загвар CC0 дор гаргагдсан. Та зөвшөөрөл авахгүйгээр хуулах, өөрчлөх, түгээх, ашиглах боломжтой.
Загвараар дамжуулан бүтээгдэхүүн худалдаж авч Бүтээгчийг дэмжээрэй Бүтээгчийн шимтгэл Борлуулагчаар тогтоосон, эсвэл энэ загварын шинэ хувилбар үүсгэж орлогоо хуваахын тулд өөрийн загварт холбоос болгон оруулна уу.
