ARTE
BELLEZA Y BIENESTAR
ARTESANÍA
CULTURA E HISTORIA
ENTRETENIMIENTO
MEDIO AMBIENTE
COMIDA Y BEBIDAS
INGENIERÍA INVERSA
CIENCIAS
DEPORTES
TECNOLOGÍA
TECNOLOGÍA VESTIBLE
Black Garden Ant (Lasius niger)
A realistic 3D model of the black garden ant, Lasius niger — Europe's most common ant. The full body is here: the head with its mandibles and elbowed antennae, the segmented mesosoma, the pinched petiole waist and the large ridged gaster, on six properly jointed legs. Built by 3DBonanza with an image-to-3D model (Hunyuan3D) driven from a reference photo, then cleaned to one watertight mesh at a printable ~90 mm. Spin it in 3D on the page or slice it straight to G-code.
Principiante
2 hours
Instrucciones
1
1
The ant, Lasius niger
The ant, Lasius niger
The black garden ant reads from its silhouette: three body sections joined by a thin waist, six legs and two elbowed antennae. The head carries the mandibles and antennae, the mesosoma carries all six legs, and the narrow petiole joins it to the large gaster. Real workers are 3-5 mm; this model is enlarged to ~90 mm.
2
2
The model in 3D
The model in 3D
Spin the ant in the viewer. It was generated with Hunyuan3D image-to-3D from a reference photo, then imported, joined into one watertight mesh, decimated to ~120k triangles and scaled to ~90 mm. Editable in free Blender.
Herramientas necesarias:
Desktop Computer3
3
Print it
Print it
Print in black or dark brown to match the ant. The legs and antennae are the challenge: print at 0.12-0.15 mm layers with supports under the legs, antennae and the gaster, or lay it on one side. Scale it up if the legs come out too fragile.
Materiales para este paso:
PLA Filament - Black (1.75mm, 1kg)1 kitHerramientas necesarias:
3D PrinterMateriales
1- Marcador de posición
Herramientas requeridas
3- Marcador de posición
- Marcador de posición
- Marcador de posición
Archivos de diseño
1CC0 Dominio público
Este Blueprint se publica bajo CC0. Eres libre de copiar, modificar, distribuir y usar este trabajo para cualquier propósito, sin pedir permiso.
Apoya al Maker comprando productos a través de su Blueprint, donde gana una Comisión del Maker establecida por los vendedores, o crea una nueva iteración de este Blueprint e inclúyela como conexión en tu propio Blueprint para compartir ingresos.