ARTE
BELLEZA Y BIENESTAR
ARTESANÍA
CULTURA E HISTORIA
ENTRETENIMIENTO
MEDIO AMBIENTE
COMIDA Y BEBIDAS
INGENIERÍA INVERSA
CIENCIAS
DEPORTES
TECNOLOGÍA
TECNOLOGÍA VESTIBLE
Plimsoll Line
Emma

Creado por

Emma

20. agosto 2026SE
1
0
0
0
0

Plimsoll Line

A circle with a horizontal bar through it, painted on the side of every merchant ship, marking how deep she may legally be loaded. It exists because overloading was profitable and drowning sailors was not the shipowner's cost. Ships left British ports so deep in the water that they were expected to founder, sometimes heavily insured and known in the press as coffin ships, and a seaman who refused to sail could be jailed for it. Samuel Plimsoll, a Member of Parliament, campaigned for years with enough fury to be temporarily suspended from the House, and the Merchant Shipping Act of 1876 made a load line compulsory. The engineering is simple — a loaded ship must retain enough reserve buoyancy above the waterline to survive a sea. The politics took a decade.
Principiante
45 minutes

Instrucciones

1

Load a hull and watch freeboard vanish

Freeboard is the height from the waterline to the deck. It is what keeps the sea out.

  1. Float a model hull and mark the waterline.
  2. Add cargo in measured steps, marking the waterline each time.
  3. Record freeboard against load.
Freeboard falls steadily as you load. Every centimetre lost is buoyancy you no longer have in reserve — and reserve buoyancy is not a comfort margin, it is the entire reason a wave breaking over the bow does not end the voyage.

Materiales para este paso:

Balsa Wood Sheet AssortmentBalsa Wood Sheet Assortment1 paquete
Digital Kitchen ScaleDigital Kitchen Scale1 pieza
2

Add waves

Static flotation is not the test that matters.

  1. At high freeboard, make waves in the tank and observe.
  2. Load the hull heavily and repeat.
  3. Note when water first comes over the side.
A deeply loaded hull ships water long before it would sink from weight alone. Once water is on deck it moves — and a free surface of water sliding to the low side makes the roll worse, which brings more water aboard. That feedback is how overloaded ships were lost.
3

Discover why one line is not enough

The same ship floats at different depths in different water.

  1. Float your loaded hull in fresh water and mark the line.
  2. Dissolve a lot of salt to make dense water and float it again.
  3. Compare.
It floats HIGHER in salt water, because denser water supplies more buoyancy per volume displaced. A ship loaded to her marks in a fresh-water river will sit deeper there than she will at sea — which is why the load line marking has a set of lines, not one.

Materiales para este paso:

Sodium Chloride (table salt)Sodium Chloride (table salt)200 g
4

Read the real marking

Learn the letters, which encode water density and season.

  1. TF Tropical Fresh · F Fresh · T Tropical · S Summer · W Winter · WNA Winter North Atlantic.
  2. Note that WNA is the LOWEST — the least cargo permitted.
  3. The circle and bar itself marks the summer load line.
The order is not arbitrary: it tracks how rough and how dense the water is. The North Atlantic in winter gets the strictest limit because that is where the worst seas are, and the seasonal zones are defined geographically in the international convention.
5

History and context

Samuel Plimsoll (1824-1898) entered Parliament in 1868 and made overloading his cause, publishing Our Seamen in 1873. The practice he attacked was straightforward: a ship insured for more than her worth, loaded past safety, was a profitable loss if she sank. Crews who refused to sail in a vessel they judged unseaworthy could be — and were — imprisoned for it. In 1873 Plimsoll lost his temper in the Commons, called members villains and shook his fist at the Speaker, and was suspended. The publicity helped.

The Merchant Shipping Act of 1876 made a load line compulsory on British ships. Its serious weakness, which is worth stating, is that it let the SHIPOWNER decide where to paint the line. Owners could and did mark it too high. Government-set positions did not arrive until 1890, and international agreement came with the Load Line Convention of 1930, now maintained by the International Maritime Organization.

The mark carries the assigning authority's initials beside the disc — LR for Lloyd's Register and so on — because a line is only as trustworthy as the body that surveyed it. That is a lesson about standards generally: the number matters less than who is accountable for it.

The name went to a shoe. Plimsoll shoes are said to be named for the band of rubber around the sole, which resembles the ship marking and, like it, indicates the depth at which water gets in.

Materiales

3

Blueprints relacionados

Estos blueprints comparten conocimiento — técnicas, materiales o principios

CC0 Dominio público

Este Blueprint se publica bajo CC0. Eres libre de copiar, modificar, distribuir y usar este trabajo para cualquier propósito, sin pedir permiso.

Apoya al Maker comprando productos a través de su Blueprint, donde gana una Comisión del Maker establecida por los vendedores, o crea una nueva iteración de este Blueprint e inclúyela como conexión en tu propio Blueprint para compartir ingresos.

Discusión

(0)

Iniciar sesión para unirte a la discusión

Cargando comentarios...