ARTE
BELLEZA Y BIENESTAR
ARTESANÍA
CULTURA E HISTORIA
ENTRETENIMIENTO
MEDIO AMBIENTE
COMIDA Y BEBIDAS
INGENIERÍA INVERSA
CIENCIAS
DEPORTES
TECNOLOGÍA
TECNOLOGÍA VESTIBLE
Building a Safety Bicycle — Chain Drive, Equal Wheels, and Personal Freedom
Palpatine

Creado por

Palpatine

25. junio 2026US
57
0
0
0
0

Building a Safety Bicycle — Chain Drive, Equal Wheels, and Personal Freedom

The bicycle that everyone rides today was settled in the 1880s and is still called, in the trade, the safety bicycle — to distinguish it from the terrifying high penny-farthing it replaced. Two equal wheels, a diamond frame, a chain driving the rear wheel, and soon air-filled tyres made cycling safe, fast, and available to ordinary people.

Each feature solves a problem. Equal wheels and a low frame mean you can put a foot down and cannot be pitched over the handlebars. The chain and gearing let a small wheel travel fast without the giant front wheel of the penny-farthing. The diamond frame, built of brazed steel tubes, is astonishingly light and strong for its weight. And Dunlop's pneumatic rubber tyres turned a bone-shaking ride into a smooth one.

The safety bicycle was more than transport. Cheap, simple, and needing no horse or fuel, it gave working people and especially women a freedom of movement they had never had — which is why it is often credited with as much social change as mechanical.

Intermedio
Several days for a full build

Instrucciones

1

Understand the safety design

The safety bicycle has two equal-sized wheels, a low diamond frame, and a chain driving the rear wheel. Together these let the rider reach the ground with a foot and avoid being thrown over the front — the dangers that made the tall penny-farthing so risky.
2

Braze the diamond frame

Cut steel tubes to length and braze them into the classic diamond: head tube, top tube, down tube, seat tube, and the rear triangle of seat-stays and chain-stays. Brazed thin-wall steel tube is light yet stiff, which is why the diamond frame has never been bettered for simple bicycles.

Materiales para este paso:

Tubo de aceroTubo de acero4 metros

Herramientas necesarias:

Soplete de soldadura fuerteSoplete de soldadura fuerte
3

Build the wheels

Lace steel spokes between a central hub and a steel rim, then tension them evenly so the wheel runs true. A tensioned wire-spoked wheel is extraordinarily light for the load it carries — the spokes work in tension, hanging the hub from the rim.

Materiales para este paso:

Radios de aceroRadios de acero72 piezas
Llanta de bicicleta (aluminio)Llanta de bicicleta (aluminio)2 piezas

Herramientas necesarias:

Llave de radiosLlave de radios
4

Fit pneumatic tyres

Mount air-filled rubber tyres on the rims. Dunlop's pneumatic tyre, made possible by vulcanised rubber, cushions the ride over rough roads and grips far better than the solid tyres it replaced — the single biggest comfort improvement of the era.

Materiales para este paso:

Neumático de cauchoNeumático de caucho2 piezas
5

Build the chain drive

Fit a large chainwheel at the pedals and a smaller sprocket at the rear hub, joined by a roller chain. The ratio between them gears the bicycle so that equal-sized wheels can still travel fast for each turn of the pedals.

Materiales para este paso:

Cadena de rodillosCadena de rodillos1 pieza
Plato de cadenaPlato de cadena1 juego
PiñónPiñón1 juego
6

Fit the bottom bracket and cranks

Mount the pedal axle in the bottom bracket on smooth bearings, then fit the cranks and pedals. Good bearings here turn the rider's effort into motion with little loss, so the bicycle rolls easily.

Materiales para este paso:

Rodamientos de bolasRodamientos de bolas1 juego
7

Set up the steering

Fit the front fork through the head tube on headset bearings and clamp on the handlebars. The fork's slight forward rake gives the steering a self-centring trail that makes the bicycle want to balance itself once moving.

Materiales para este paso:

ManillarManillar1 pieza
8

Fit brakes

Add brakes that press pads against the wheel rims, operated by levers on the handlebars. Reliable braking matters far more on the fast, low safety bicycle than it did on slower machines, so set them to grip firmly and evenly.

Materiales para este paso:

Pinza de frenoPinza de freno2 piezas
9

Fit the saddle

Mount a sprung leather saddle on a seatpost and set its height so the rider's leg is almost straight at the bottom of the pedal stroke. Correct saddle height is the difference between an efficient ride and a painful one.

Materiales para este paso:

Silla de montar de cueroSilla de montar de cuero1 pieza
10

Assemble and true

Bring it all together: wheels in the frame, chain on, brakes and steering connected. True the wheels by adjusting spoke tension until they spin without wobble, and adjust every bearing so it turns freely but without play.

Herramientas necesarias:

Llave de tuboLlave de tubo
11

Test and tune

Ride gently at first, checking that the brakes bite, the steering is steady, and nothing rubs or rattles. Fine-tune the saddle, bars, and bearings. A well-set-up safety bicycle feels stable and almost steers itself at speed.

Herramientas necesarias:

Llave de tuboLlave de tubo
12

Appreciate the freedom it gave

Pedal away on a machine that needs no horse, no fuel, and no rails. Cheap and simple, the safety bicycle gave ordinary people — and famously women — independent mobility for the first time, reshaping society as much as it reshaped travel.

Materiales

11

Herramientas requeridas

3

Blueprints relacionados

Estos blueprints comparten conocimiento — técnicas, materiales o principios

Vulcanizing Rubber with Sulfur — The Accidental Discovery That Put Tyres on the Road

Vulcanizing Rubber with Sulfur — The Accidental Discovery That Put Tyres on the Road

por CharlieDE

Industrial

81
0
0
0
3
0

CC0 Dominio público

Este Blueprint se publica bajo CC0. Eres libre de copiar, modificar, distribuir y usar este trabajo para cualquier propósito, sin pedir permiso.

Apoya al Maker comprando productos a través de su Blueprint, donde gana una Comisión del Maker establecida por los vendedores, o crea una nueva iteración de este Blueprint e inclúyela como conexión en tu propio Blueprint para compartir ingresos.

Discusión

(0)

Iniciar sesión para unirte a la discusión

Cargando comentarios...