ARTE
BELLEZA Y BIENESTAR
ARTESANÍA
CULTURA E HISTORIA
ENTRETENIMIENTO
MEDIO AMBIENTE
COMIDA Y BEBIDAS
INGENIERÍA INVERSA
CIENCIAS
DEPORTES
TECNOLOGÍA
TECNOLOGÍA VESTIBLE

The Spring Table Tongs: Notched Jaws to Hold a Bone and Pick Out Fish-Bones
Eating chicken or fish at table means holding a greasy bone in the fingers or picking fish-bones out with them.
James Huffman of Mount Crawford and Joseph Funkhouser of Keezletown, Virginia, received US 197,372, dated 20 November 1877, for "an implement to be used as table-tongs", "formed of a single piece of spring-steel or other suitable metal, and somewhat in the shape of a pair of sugar-tongs, for table purposes". Its jaws have V-shaped notches that meet to hold a bone firmly while the meat is picked off, and flat faces from the notches to the tips that fit snugly together to catch and remove fish-bones.
This rung works out how hard the spring body pushes back, then bends the tongs from spring steel with notched jaws and thumb pieces, and tries them at the table.
Intermedio
About 3 hours
Instrucciones
1
1
The spring's push
The spring's push
Cargando el cuaderno de Jupyter…
2
2
Tongs for the table before it
Tongs for the table before it
The embedded blueprint combines a spoon or shovel with tongs. Huffman and Funkhouser make the whole tongs of one spring and shape the jaws for bones.
3
3
Read US 197,372
Read US 197,372
"A represents the body of the implement, and B B two pieces formed on said body for thumb and finger pieces. The two ends or jaws of the implement are provided with V-shaped notches C, which are opposite each other. The metal is perfectly flat from C to x on the jaws, so that they (the jaws) may fit snugly together."
"The object of this implement is to hold chicken or other bones while eating, as well as to pick out fish-bones. The bone, while eating, is held firmly in the notches C C. When not used for holding bones while the flesh is being picked off, the flat part from C to x serves to catch and remove fish-bones."
4
4
Make the tongs and try them
Make the tongs and try them
**Body.** Cut 26 cm of spring steel strip about 10 mm wide. File its ends round and all its edges smooth. Bend it in the middle round a 30 mm bar into a bow, and shape the two arms like sugar tongs so the tips meet when pressed and spring 3–4 cm apart when released.
**Jaws.** Bend the last 2 cm of each arm inward to meet the other. File a V notch in the middle of each jaw's edge so the two notches face each other, and file the jaws flat from the notch to the tip so they close snugly.
**Grips.** Rivet a small oval of flat bar to each arm near its middle as the thumb and finger pieces B B.
**Test.** Hold a cooked chicken bone in the notches and pick the meat off with a fork. Pick small bones from a piece of cooked fish with the flat tips.
Materiales para este paso:
Fleje de acero para muelles0.3 metro
Pletina de acero dulce0.1 metro
Remaches ciegos2 piezasHerramientas necesarias:
Sierra para metales
Tornillo de banco
Martillo
Limas (lima de mano)
Juego de limas de aguja
Taladro inalámbrico
Juego de brocas
Kit de remachadora
Dinamómetro (balanza de resorte)
Guantes de trabajo de cuero5
5
Tongs that slip, pinch or will not spring open
Tongs that slip, pinch or will not spring open
Spring table tongs troubleshooting.
Flow
Loading...
6
6
History and honest limits
History and honest limits
**James Huffman** of Mount Crawford and **Joseph Funkhouser** of Keezletown, Rockingham County, Virginia, filed US 197,372 on 27 September 1877; it is dated 20 November 1877. Their claim is the spring body with jaws carrying the notches C C and the flat surfaces from C to x.
**Honest limits.** Bought spring steel strip, bent cold, stands in for their made-up body, and riveted pieces for the formed thumb and finger pieces. The notebook uses the straight cantilever formula for a curved arm; its dimensions and closing are examples. Your use at table is the result.
Materiales
3- 0.3 metroMarcador de posición
- 0.1 metroMarcador de posición
- 2 piezasMarcador de posición
Herramientas requeridas
10- Marcador de posición
- Marcador de posición
- Marcador de posición
- Marcador de posición
- Marcador de posición
- 1 vendor sell this, none ship to you yetMarcador de posición
- Marcador de posición
- Marcador de posición
- Marcador de posición
- Marcador de posición
Blueprints relacionados
Estos blueprints comparten conocimiento — técnicas, materiales o principios
CC0 Dominio público
Este Blueprint se publica bajo CC0. Eres libre de copiar, modificar, distribuir y usar este trabajo para cualquier propósito, sin pedir permiso.
Apoya al Maker comprando productos a través de su Blueprint, donde gana una Comisión del Maker establecida por los vendedores, o crea una nueva iteración de este Blueprint e inclúyela como conexión en tu propio Blueprint para compartir ingresos.

