Kerjasama
SENI
KECANTIKAN & KESEJAHTERAAN
KRAFTANGAN
BUDAYA & SEJARAH
HIBURAN
ALAM SEKITAR
MAKANAN & MINUMAN
KEJURUTERAAN TERBALIK
SAINS
SUKAN
TEKNOLOGI
BOLEH PAKAI
Aspirator: a Vessel of Water with a Tap at the Bottom (Sutton, 1904)
Charlie

Dicipta oleh

Charlie

4. November 2026DE
6
0
0
0
0

Aspirator: a Vessel of Water with a Tap at the Bottom (Sutton, 1904)

The simplest aspirator: a closed vessel of known volume, full of water, with a tap at the bottom. As the water runs out it draws gas in through the apparatus attached to it, and the volume of water run out is the volume of gas drawn through. Result: an aspirator that draws a measured volume of gas, for example 1/10 cubic foot, through an absorber at a steady rate. Source: F. Sutton, A Systematic Handbook of Volumetric Analysis (1904), pp. 581-582. Unknown: the vessel's material and the tap. Picture: p. 581 of the book.
Pemula
Unknown

Arahan

1

Fit the vessel

Take a vessel of known volume, for example exactly 1/10 cubic foot, and fix a tap at its bottom. Close its mouth tightly with a cork carrying a glass tube, which connects to the absorber the gas is to pass through. Ours: a large clear glass bottle. Not given: the vessel's material, the tap.

Bahan untuk langkah ini:

Botol kaca (jernih)Botol kaca (jernih)1 aspirator vessel
Injap tidak diketahuiInjap tidak diketahui1 bottom tap
Gabus penyumbatGabus penyumbat1 stopper
Tiub kacaTiub kaca1 inlet tube

Alatan diperlukan:

Penyuluh tiup kaca mejaPenyuluh tiup kaca meja
Dimensi tidak diketahuiDimensi tidak diketahui
2

Set the flow and draw the gas

Fill the vessel with water, connect the absorber, check that everything is tight, and open the tap partly: the small outflow of water draws the gas through the absorber. For an even rate, fit about a yard of tubing to the outlet, for a steady head, ending in a fine jet tried beforehand to give the time wanted; used reversed, the jet clogs less. When the vessel is empty the gas stops, and the water run out measures the gas passed. Collect and measure the water if the vessel is not of fixed volume.

Bahan untuk langkah ini:

Tiub GetahTiub Getah1 outlet tubing
Tiub kacaTiub kaca1 jet

Alatan diperlukan:

Silinder penyukatSilinder penyukat

Bahan

5

Alatan Diperlukan

3

Blueprint ini membuat

CC0 Domain Awam

Blueprint ini dikeluarkan di bawah CC0. Anda bebas menyalin, mengubah, mengedar, dan menggunakan karya ini untuk sebarang tujuan, tanpa meminta kebenaran.

Sokong Pembuat dengan membeli produk melalui Blueprint mereka di mana mereka memperoleh Komisen Pembuat ditetapkan oleh Penjual, atau cipta iterasi baru Blueprint ini dan sertakan ia sebagai sambungan dalam Blueprint anda sendiri untuk berkongsi hasil.

Perbincangan

(0)

Log masuk untuk menyertai perbincangan

Memuatkan komen...