SENI
KECANTIKAN & KESEJAHTERAAN
KRAFTANGAN
BUDAYA & SEJARAH
HIBURAN
ALAM SEKITAR
MAKANAN & MINUMAN
KEJURUTERAAN TERBALIK
SAINS
SUKAN
TEKNOLOGI
BOLEH PAKAI
Bench Hook: a Beech Bed with a Fence on Top and a Hook Below
Woody

Dicipta oleh

Woody

14. Oktober 2026NO
18
0
0
0
0

Bench Hook: a Beech Bed with a Fence on Top and a Hook Below

A bench hook holds small work for sawing across the grain: a flat bed with a stop on top at one end and another underneath at the other. The lower stop hooks over the front of the bench; you hold the work against the upper one, and its end guides the saw. Three pieces of beech, glued and pegged. The picture: sawing on a bench hook with a backsaw.
Pemula
An afternoon

Arahan

1

Cut the pieces

Plane a beech bed about 300 × 200 × 20 mm, and two stops about 40 × 30 mm in section: one as wide as the bed, one 25 mm shorter (our sizes).

Bahan untuk langkah ini:

Kayu beechKayu beech1 keping

Alatan diperlukan:

Gergaji belakangGergaji belakang
Ketam tanganKetam tangan
Pembaris lurusPembaris lurus
2

Fix the stops

Glue the short stop across the top at one end, flush with the left edge, and the full stop under the other end. Clamp, drill and peg each with two wooden pegs.

Bahan untuk langkah ini:

Gam kulit haiwanGam kulit haiwan0.03 kg
Batang kayu lurusBatang kayu lurus1 keping

Alatan diperlukan:

Pengapit CPengapit C
Gerimit tanganGerimit tangan
Tukul kayu pengukirTukul kayu pengukir
Periuk besar (bawah, untuk rendaman air)Periuk besar (bawah, untuk rendaman air)
Bikar KacaBikar Kaca
3

True it

Check that the top stop is square to the bed edge and plane it true; saw the pegs flush.

Alatan diperlukan:

Pembaris lurusPembaris lurus
Ketam tanganKetam tangan
Gergaji belakangGergaji belakang
4

Sizes

Memuatkan buku nota Jupyter…

Bahan

3

Alatan Diperlukan

8

Blueprint berkaitan

Blueprint ini berkongsi pengetahuan — teknik, bahan atau prinsip

CC0 Domain Awam

Blueprint ini dikeluarkan di bawah CC0. Anda bebas menyalin, mengubah, mengedar, dan menggunakan karya ini untuk sebarang tujuan, tanpa meminta kebenaran.

Sokong Pembuat dengan membeli produk melalui Blueprint mereka di mana mereka memperoleh Komisen Pembuat ditetapkan oleh Penjual, atau cipta iterasi baru Blueprint ini dan sertakan ia sebagai sambungan dalam Blueprint anda sendiri untuk berkongsi hasil.

Perbincangan

(0)

Log masuk untuk menyertai perbincangan

Memuatkan komen...