Kerjasama
SENI
KECANTIKAN & KESEJAHTERAAN
KRAFTANGAN
BUDAYA & SEJARAH
HIBURAN
ALAM SEKITAR
MAKANAN & MINUMAN
KEJURUTERAAN TERBALIK
SAINS
SUKAN
TEKNOLOGI
BOLEH PAKAI
Pop Rivets: Hollow Rivet on a Break-Off Former Shank (Cherry 1939)
A rivet you set from one side. Cherry threaded a hollow rivet onto a shank with a bevelled head, the former, at the far end. Pull the shank while pushing on the rivet head and the former spreads the rivet's tail against the back of the work. A groove in the shank makes it break at a set pull, so every rivet is set to the same tightness.
Source: Carl W. Cherry, US 2,183,543 (1939). Unknown: the metal and the dimensions. Cherry gives neither, so both are linked to unknown heads. Turning the parts on a lathe and setting them with a pop rivet gun are ours. Picture: the patent's drawing.
Lanjutan
1 day
Arahan
1
1
Turn the hollow rivet
Turn the hollow rivet
Turn a tubular rivet with a head formed at one end and a passage right through it. Unknown: the metal and the sizes.
Bahan untuk langkah ini:
Logam tidak diketahui1 as requiredAlatan diperlukan:
Mesin Pelarik Logam
Set mata larik (HSS)
Angkup Vernier
Dimensi tidak diketahui2
2
Turn the former shank
Turn the former shank
Turn a shank that slides through the rivet's passage, with a former head at one end: no wider than the rivet, and bevelled on its inner edge where it meets the rivet's tail. The bevel sets the angle the tail spreads to. Cut a groove around the shank where it should break.
Bahan untuk langkah ini:
Logam tidak diketahui1 as requiredAlatan diperlukan:
Mesin Pelarik LogamSet mata larik (HSS)Angkup VernierDimensi tidak diketahui3
3
Assemble and set
Assemble and set
Push the shank through the rivet so the former sits against the tail. Put the rivet into matching holes in the work. Press on the rivet head and pull the shank at the same time (Cherry's tool: a casing with a dolly on the head, and a shank holder pulled by cammed handles; ours: a pop rivet gun). The former spreads the tail against the far plate. Then the shank breaks at its groove, and the broken pieces fall out of the passage.
Alatan diperlukan:
Gerudi Tiang
Set penembak rivet
Cermin mata keselamatanBahan
1- 1 as requiredPemegang Tempat
Alatan Diperlukan
7- Pemegang Tempat
- Pemegang Tempat
- Pemegang Tempat
- Pemegang Tempat
- Pemegang Tempat
- Pemegang Tempat
- Pemegang Tempat
Blueprint ini membuat
Blueprint berkaitan
Blueprint ini berkongsi pengetahuan — teknik, bahan atau prinsip
CC0 Domain Awam
Blueprint ini dikeluarkan di bawah CC0. Anda bebas menyalin, mengubah, mengedar, dan menggunakan karya ini untuk sebarang tujuan, tanpa meminta kebenaran.
Sokong Pembuat dengan membeli produk melalui Blueprint mereka di mana mereka memperoleh Komisen Pembuat ditetapkan oleh Penjual, atau cipta iterasi baru Blueprint ini dan sertakan ia sebagai sambungan dalam Blueprint anda sendiri untuk berkongsi hasil.