SENI
KECANTIKAN & KESEJAHTERAAN
KRAFTANGAN
BUDAYA & SEJARAH
HIBURAN
ALAM SEKITAR
MAKANAN & MINUMAN
KEJURUTERAAN TERBALIK
SAINS
SUKAN
TEKNOLOGI
BOLEH PAKAI

Bronze Mesh Screen: Fine Bronze Wire Woven on a Wire Loom
The mould for wove paper is a wooden frame covered with finely woven metal wire cloth; the period moulds used brass (Wikipedia, Wove paper). This screen is woven from fine bronze wire on a wire loom, as in our woven wire cloth blueprint, to about 40 openings per inch. Mesh count and finishing are ours.
The picture: our drawing.
Lanjutan
Several days
Arahan
1
1
How wire cloth is woven
How wire cloth is woven
Warping, a low shed, passing the weft and beating up.
2
2
Warp for 40 to the inch
Warp for 40 to the inch
Warp the loom with fine bronze wire at 40 wires to the inch (25.4 mm), a little wider than the mould.
Bahan untuk langkah ini:
Dawai gangsa1 as requiredAlatan diperlukan:
Alat tenun kain dawai
Pembaris
Sarung Tangan Kerja Kulit3
3
Weave
Weave
Weave plain over-and-under with the same wire as weft, keeping the shed low and beating each pick to the same spacing. Count the openings over an inch with the loupe now and then.
Bahan untuk langkah ini:
Dawai gangsa1 as requiredAlatan diperlukan:
Alat tenun kain dawai
Kanta Pembesar Tukang Emas4
4
Cut and bind the edges
Cut and bind the edges
Take the cloth off the loom, cut it a little larger than the mould, and twist the loose wire ends back on themselves along each edge so it does not unravel.
Alatan diperlukan:
Gunting kepingan logam
Playar muncung tirus
Sarung Tangan Kerja KulitBahan
1- 1 as requiredPemegang Tempat
Alatan Diperlukan
6- Pemegang Tempat
- Pemegang Tempat
- Pemegang Tempat
- Pemegang Tempat
- Pemegang Tempat
- Pemegang Tempat
Blueprint ini membuat
Blueprint berkaitan
Blueprint ini berkongsi pengetahuan — teknik, bahan atau prinsip
CC0 Domain Awam
Blueprint ini dikeluarkan di bawah CC0. Anda bebas menyalin, mengubah, mengedar, dan menggunakan karya ini untuk sebarang tujuan, tanpa meminta kebenaran.
Sokong Pembuat dengan membeli produk melalui Blueprint mereka di mana mereka memperoleh Komisen Pembuat ditetapkan oleh Penjual, atau cipta iterasi baru Blueprint ini dan sertakan ia sebagai sambungan dalam Blueprint anda sendiri untuk berkongsi hasil.


