Kerjasama
SENI
KECANTIKAN & KESEJAHTERAAN
KRAFTANGAN
BUDAYA & SEJARAH
HIBURAN
ALAM SEKITAR
MAKANAN & MINUMAN
KEJURUTERAAN TERBALIK
SAINS
SUKAN
TEKNOLOGI
BOLEH PAKAI
Youblob · CC0
Elastic Cord: Cotton Braided over a Stretched Rubber Strand (Blakesley 1889)
Braid cotton round a rubber strand while the rubber is stretched, and the cord springs back when it is let go. Gilbert Blakesley of Bristol, Connecticut set the stretch so that the braid stops the cord before the rubber is pulled past the point it fully recovers from, and so that at rest the rubber carries no tension at all. The braid protects the rubber and it lasts.
Source: G. H. Blakesley, US 411,416 (1889). The rubber strand is our rubber thread blueprint; the tools are ours. Picture drawn by Youblob.
Pertengahan
2 hours
Arahan
1
1
Feed the rubber under tension
Feed the rubber under tension
Pass a long rubber strand, or several, under tension through a braiding machine. Round or flat, one strand or more: Blakesley says it does not matter.
Bahan untuk langkah ini:
Benang getah1 as requiredAlatan diperlukan:
Mesin tocang2
2
Braid on a cotton cover
Braid on a cotton cover
Let the machine braid a covering of cotton thread over the stretched rubber with a rapid feed.
Bahan untuk langkah ini:
Benang Kapas1 as requiredAlatan diperlukan:
Mesin tocang3
3
Set tension against feed
Set tension against feed
Adjust the rubber tension and the braider feed so that, when the cord is pulled, the braid reaches its full length before the rubber reaches its safe stretch, the stretch it fully recovers from without risk of breaking. At rest, the rubber should be under no tension at all.
Alatan diperlukan:
Mesin tocang
Pembaris4
4
Optional soft second cover
Optional soft second cover
For a softer cord, pass it again, under tension, through a braider that lays a loose second covering of soft thread such as silk or wool.
Bahan untuk langkah ini:
Benang sutera1 as requiredAlatan diperlukan:
Mesin tocang5
5
Reel it
Reel it
Wind the cord on a reel as it leaves the braider.
Alatan diperlukan:
Set gelendong benangBahan
3- 1 as requiredPemegang Tempat
- 1 as requiredPemegang Tempat
- 1 as requiredPemegang Tempat
Blueprint ini membuat
Blueprint berkaitan
Blueprint ini berkongsi pengetahuan — teknik, bahan atau prinsip
CC0 Domain Awam
Blueprint ini dikeluarkan di bawah CC0. Anda bebas menyalin, mengubah, mengedar, dan menggunakan karya ini untuk sebarang tujuan, tanpa meminta kebenaran.
Sokong Pembuat dengan membeli produk melalui Blueprint mereka di mana mereka memperoleh Komisen Pembuat ditetapkan oleh Penjual, atau cipta iterasi baru Blueprint ini dan sertakan ia sebagai sambungan dalam Blueprint anda sendiri untuk berkongsi hasil.