Kerjasama
SENI
KECANTIKAN & KESEJAHTERAAN
KRAFTANGAN
BUDAYA & SEJARAH
HIBURAN
ALAM SEKITAR
MAKANAN & MINUMAN
KEJURUTERAAN TERBALIK
SAINS
SUKAN
TEKNOLOGI
BOLEH PAKAI
Ferrite Toroid Core: Copper-Zinc Ferrite Milled 200 Hours, Fired at 1050 °C (Snoek)
Charlie

Dicipta oleh

Charlie

21. Oktober 2026DE
12
0
0
0
0

Ferrite Toroid Core: Copper-Zinc Ferrite Milled 200 Hours, Fired at 1050 °C (Snoek)

Ferrite is a ceramic magnet: iron oxide combined with other metal oxides, carrying magnetic flux while hardly conducting electricity. In his first ferrite patent (US 2,452,529, 1948) Snoek at Philips ground the oxides very fine and fired rings in oxygen. This copper-zinc ferrite is milled about 200 hours, fired 2 hours at 1050 °C and held 12 hours at 600 °C; his core had an initial permeability of 200. The picture: our diagram.
Lanjutan
2 weeks

Arahan

1

Mix 20 : 30 : 50 mol

Mix pure copper oxide, zinc oxide and ferric oxide, 20 : 30 : 50 mol %. Ours, by weight: 13.24 g copper oxide, 20.32 g zinc oxide and 66.44 g ferric oxide per 100 g.

Bahan untuk langkah ini:

Kuprum OksidaKuprum Oksida13.24 g
Serbuk Zink OksidaSerbuk Zink Oksida20.32 g
Ferik OksidaFerik Oksida66.44 g

Alatan diperlukan:

Neraca dua piringNeraca dua piring
Topeng HabukTopeng Habuk
2

Grind about 200 hours in an iron ball mill

Grind the mixture for about 200 hours in an iron ball mill.

Alatan diperlukan:

Kilang Bebola BesiKilang Bebola Besi
Topeng HabukTopeng Habuk
3

Mould a ring at 4 tons per cm²

Press the powder at 4 tons per square centimetre into a ring 3 cm across with a 4 × 4 mm section.

Alatan diperlukan:

Mesin tekan hidraulikMesin tekan hidraulik
Acuan Penekan GelangAcuan Penekan Gelang
4

Fire 2 hours at 1050 °C, hold 12 hours at 600 °C

Heat the ring for two hours at 1050 °C in a current of oxygen, cool at 5 °C a minute to 600 °C, hold it there 12 hours, then cool to room temperature, all in oxygen. Snoek's core: initial permeability 200.

Alatan diperlukan:

Relau TiubRelau Tiub
OksigenOksigen
Silinder gas bertekananSilinder gas bertekanan
PirometerPirometer
Penyepit Mangkuk PijarPenyepit Mangkuk Pijar
Sarung Tangan Tahan HabaSarung Tangan Tahan Haba

Bahan

3

Alatan Diperlukan

11

CC0 Domain Awam

Blueprint ini dikeluarkan di bawah CC0. Anda bebas menyalin, mengubah, mengedar, dan menggunakan karya ini untuk sebarang tujuan, tanpa meminta kebenaran.

Sokong Pembuat dengan membeli produk melalui Blueprint mereka di mana mereka memperoleh Komisen Pembuat ditetapkan oleh Penjual, atau cipta iterasi baru Blueprint ini dan sertakan ia sebagai sambungan dalam Blueprint anda sendiri untuk berkongsi hasil.

Perbincangan

(0)

Log masuk untuk menyertai perbincangan

Memuatkan komen...