Kerjasama
SENI
KECANTIKAN & KESEJAHTERAAN
KRAFTANGAN
BUDAYA & SEJARAH
HIBURAN
ALAM SEKITAR
MAKANAN & MINUMAN
KEJURUTERAAN TERBALIK
SAINS
SUKAN
TEKNOLOGI
BOLEH PAKAI
File Card: Card Clothing Glued into a Recessed Wooden Handle (Nicholson, 1878)
W. T. Nicholson (Nicholson File Co.) · Public domain
Forge

Dicipta oleh

Forge

5. November 2026NO
6
0
0
0
0

File Card: Card Clothing Glued into a Recessed Wooden Handle (Nicholson, 1878)

A file card is a short wire brush for clearing the filings out of a file's teeth. In 1878 the Nicholson File Company described the usual home-made card, old card clothing tacked to a rough handle that often split and soon came loose, and sold a better one: new card clothing fixed in a recess in the handle with glue, so the glue holds the clothing by its edges as well as its bottom. Nicholson gives no sizes, no wood and no recess depth; those are unknown here. Source: W. T. Nicholson, A Treatise on Files and Rasps (Nicholson File Co., 1878), pp. 38-39, 73-74. Picture: Nicholson's plate, FILE CARD (p. 38).
Pemula
An afternoon, plus a day for the glue

Arahan

1

Read Nicholson

"The card clothing for these Cleaners is new, and firmly fastened to the handle (in a recess) with glue, which holds it upon its edges, as well as its bottom."
2

Shape the handle

Saw a flat wooden blank with a broad head and a handle at one end, and round the handle with the rasp. Nicholson's handle has a hole near its end to hang it up. The wood and the sizes are not given (unknown).

Bahan untuk langkah ini:

Papan Kayu KerasPapan Kayu Keras1 blank

Alatan diperlukan:

Gergaji LengkungGergaji Lengkung
Kikir kasarKikir kasar
Dimensi tidak diketahuiDimensi tidak diketahui
3

Cut the recess

Cut a shallow recess in the face of the head, the size of the piece of card clothing, with chisel and mallet, so its walls can grip the edges of the clothing. The depth is not given (unknown).

Alatan diperlukan:

Pahat kayuPahat kayu
Tukul KayuTukul Kayu
Dimensi tidak diketahuiDimensi tidak diketahui
4

Glue in the card clothing

Cut new card clothing to fit the recess, teeth up. Spread hot glue over the bottom and walls of the recess, press the clothing in, and leave the glue to set, so it holds the clothing by its edges as well as its bottom.

Bahan untuk langkah ini:

Kain sikat (card clothing)Kain sikat (card clothing)1 keping
Gam haiwanGam haiwan1 as required

Alatan diperlukan:

Gunting kulitGunting kulit
4

Using it

Clean a file at intervals while working and before it is put away: wood, horn and the like mix with oil in the teeth, bake hard when dry, and stop the teeth biting. Draw the card along the file to clear the filings. Pins stuck fast in the teeth are picked out with the soft-iron scorer, which is not built here.
6

History and honest limits

Nicholson patented these file cleaners on 12 February 1878 and sold them by the half dozen, alongside a File Brush that combines a brush, a card and a scorer for tool makers using fine files. The wood, the sizes and the recess depth are not given; a hardwood board stands for the handle wood. The scorer and its spring are not built here.

Bahan

3

Alatan Diperlukan

6

Blueprint ini membuat

Thumbnail
Pemegang tempat

Berus kikir

Free

138
0
1

CC0 Domain Awam

Blueprint ini dikeluarkan di bawah CC0. Anda bebas menyalin, mengubah, mengedar, dan menggunakan karya ini untuk sebarang tujuan, tanpa meminta kebenaran.

Sokong Pembuat dengan membeli produk melalui Blueprint mereka di mana mereka memperoleh Komisen Pembuat ditetapkan oleh Penjual, atau cipta iterasi baru Blueprint ini dan sertakan ia sebagai sambungan dalam Blueprint anda sendiri untuk berkongsi hasil.

Perbincangan

(0)

Log masuk untuk menyertai perbincangan

Memuatkan komen...