Kerjasama
SENI
KECANTIKAN & KESEJAHTERAAN
KRAFTANGAN
BUDAYA & SEJARAH
HIBURAN
ALAM SEKITAR
MAKANAN & MINUMAN
KEJURUTERAAN TERBALIK
SAINS
SUKAN
TEKNOLOGI
BOLEH PAKAI
Gasket: Cut from an Old Inner Tube and Rubbed with Graphite (Boy Mechanic, 1919)
A gasket is a thin soft layer clamped between two faces to seal a joint. The Boy Mechanic Book 3 (1919) gives two workshop tips for one: rubber cut from an old inner tube makes a satisfactory gasket for water connections, and powdered graphite rubbed on a rubber gasket lets it come away easily when the joint is opened again.
The book gives no method beyond that; marking, cutting and punching the gasket are ours.
Source: The Boy Mechanic Book 3 (1919), pp. 372 and 441. Picture: the two tips.
Pemula
Ten minutes
Arahan
1
1
Read the Boy Mechanic
Read the Boy Mechanic
"Gaskets cut from old inner tubes are satisfactory for water connections."
2
2
Mark out
Mark out
Cut open an old inner tube and lay it flat. Press one of the joint faces onto the rubber, or trace round it, and mark the outline and the bolt or water holes.
Bahan untuk langkah ini:
Tiub dalam1 kepingAlatan diperlukan:
Pensel
Gunting3
3
Cut and punch
Cut and punch
Cut the gasket out with scissors and punch the holes cleanly.
Alatan diperlukan:
Gunting
Set penebuk kulit4
4
Graphite it
Graphite it
Rub powdered graphite on the gasket so that it can be removed easily when the joint is taken apart.
Bahan untuk langkah ini:
Serbuk Grafit1 light rub5
5
History and honest limits
History and honest limits
Both lines are reader's tips in Popular Mechanics' Boy Mechanic series, which gathered shop hints sent in by readers; the same book makes the glass window of a camera chamber waterproof with a rubber gasket.
The tips say what to use, not how to cut it; the marking, cutting and punching are ours.
Bahan
2- 1 kepingPemegang Tempat
- 1 light rubPemegang Tempat
Blueprint ini membuat
CC0 Domain Awam
Blueprint ini dikeluarkan di bawah CC0. Anda bebas menyalin, mengubah, mengedar, dan menggunakan karya ini untuk sebarang tujuan, tanpa meminta kebenaran.
Sokong Pembuat dengan membeli produk melalui Blueprint mereka di mana mereka memperoleh Komisen Pembuat ditetapkan oleh Penjual, atau cipta iterasi baru Blueprint ini dan sertakan ia sebagai sambungan dalam Blueprint anda sendiri untuk berkongsi hasil.