SENI
KECANTIKAN & KESEJAHTERAAN
KRAFTANGAN
BUDAYA & SEJARAH
HIBURAN
ALAM SEKITAR
MAKANAN & MINUMAN
KEJURUTERAAN TERBALIK
SAINS
SUKAN
TEKNOLOGI
BOLEH PAKAI
Glass Sample Vials: Tubing Closed Flat, with a Lip and a Cork
Bubbles

Dicipta oleh

Bubbles

14. Oktober 2026IT
15
0
0
0
0

Glass Sample Vials: Tubing Closed Flat, with a Lip and a Cork

A vial is a small glass tube closed at one end, usually with a flat bottom where a test tube has a round one. A lip vial is closed with a cork. Work wide glass tubing in the flame as for test tubes, flatten the closed end on the marver, turn out a lip and fit a cork. The picture: a small old glass vial with its cork.
Pertengahan
An afternoon

Arahan

1

Draw off and close

Heat the tubing in the flame while turning it until it softens through, then pull the ends apart to close it, as for test tubes. Melt the closed end until the glass gathers evenly.

Bahan untuk langkah ini:

Kit Tiub KacaKit Tiub Kaca1 keping

Alatan diperlukan:

Penunu BunsenPenunu Bunsen
Sarung Tangan Tahan HabaSarung Tangan Tahan Haba
Cermin mata keselamatanCermin mata keselamatan
2

Flatten the bottom

While the closed end is soft, press it straight down on the marver so it sets flat and the vial stands (our step).

Alatan diperlukan:

Penunu BunsenPenunu Bunsen
Marver (papan penggolek kaca)Marver (papan penggolek kaca)
Sarung Tangan Tahan HabaSarung Tangan Tahan Haba
3

Cut and turn the lip

Score the tube at the vial's length with a file and snap it. Heat the open end and roll out a small lip so a cork seats firmly.

Alatan diperlukan:

Kikir LogamKikir Logam
Penunu BunsenPenunu Bunsen
Cermin mata keselamatanCermin mata keselamatan
4

Anneal and cork

Let the vial cool slowly in the edge of the flame, then trim a cork to fit the mouth.

Bahan untuk langkah ini:

Gabus penyumbatGabus penyumbat1 keping

Alatan diperlukan:

Penunu BunsenPenunu Bunsen
Pisau utilitiPisau utiliti
Penebuk gabusPenebuk gabus
5

Tube size for 50 ml

Memuatkan buku nota Jupyter…

Bahan

2

Alatan Diperlukan

7

Blueprint berkaitan

Blueprint ini berkongsi pengetahuan — teknik, bahan atau prinsip

CC0 Domain Awam

Blueprint ini dikeluarkan di bawah CC0. Anda bebas menyalin, mengubah, mengedar, dan menggunakan karya ini untuk sebarang tujuan, tanpa meminta kebenaran.

Sokong Pembuat dengan membeli produk melalui Blueprint mereka di mana mereka memperoleh Komisen Pembuat ditetapkan oleh Penjual, atau cipta iterasi baru Blueprint ini dan sertakan ia sebagai sambungan dalam Blueprint anda sendiri untuk berkongsi hasil.

Perbincangan

(0)

Log masuk untuk menyertai perbincangan

Memuatkan komen...