SENI
KECANTIKAN & KESEJAHTERAAN
KRAFTANGAN
BUDAYA & SEJARAH
HIBURAN
ALAM SEKITAR
MAKANAN & MINUMAN
KEJURUTERAAN TERBALIK
SAINS
SUKAN
TEKNOLOGI
BOLEH PAKAI
Plain-Weave Cotton Cloth on a Rigid Heddle Loom
Plain weave is the simplest cloth: each crosswise thread goes over one lengthwise thread and under the next, and back the other way on the next pass. A rigid heddle loom does the lifting: one bar of slots and holes raises or lowers every other warp thread at once.
The thread is the 2-ply cotton from the hand-spinning blueprint, used for both warp and weft.
Pertengahan
About a week of evenings
Arahan
1
1
The thread
The thread
Spinning and plying the cotton thread used here.
2
2
Find the sett
Find the sett
Wrap the thread round a ruler, touching but not crowded, and count the wraps in 2.5 cm. For plain weave set the warp at about half that many threads per 2.5 cm, and choose the heddle to match.
Alatan diperlukan:
Pembaris3
3
Measure the warp
Measure the warp
On the warping board wind as many threads as the width times the sett, each the cloth's length plus about 50 cm for tying on and loom waste.
Bahan untuk langkah ini:
Benang Kapas150 gAlatan diperlukan:
Papan pengani
Pita Ukur4
4
Thread the heddle
Thread the heddle
Thread one warp end through each slot and each hole in turn, tie the ends to the back beam, wind on under even tension and tie on at the front.
Alatan diperlukan:
Kek tenun sikat tegar5
5
Weave
Weave
Raise the heddle, pass the shuttle through, beat the weft gently with the heddle; lower the heddle, pass back, beat. Leave the weft at a slant across the shed so the edges do not pull in.
Bahan untuk langkah ini:
Benang Kapas120 gAlatan diperlukan:
Kek tenun sikat tegar
Torak tenun6
6
Cut off and secure
Cut off and secure
Cut the cloth off the loom and knot or hem both ends so the weft cannot slip off.
Alatan diperlukan:
Gunting kain7
7
Wash to finish
Wash to finish
Wash the cloth in hot water, dry it, and measure it: the threads relax and close up. Note how much it shrank for the next warp.
Alatan diperlukan:
Pita Ukur8
8
Troubleshooting
Troubleshooting
Plain weave troubleshooting.
Flow
Loading...
Bahan
1- 270 gPemegang Tempat
Blueprint ini membuat
Blueprint berkaitan
Blueprint ini berkongsi pengetahuan — teknik, bahan atau prinsip
CC0 Domain Awam
Blueprint ini dikeluarkan di bawah CC0. Anda bebas menyalin, mengubah, mengedar, dan menggunakan karya ini untuk sebarang tujuan, tanpa meminta kebenaran.
Sokong Pembuat dengan membeli produk melalui Blueprint mereka di mana mereka memperoleh Komisen Pembuat ditetapkan oleh Penjual, atau cipta iterasi baru Blueprint ini dan sertakan ia sebagai sambungan dalam Blueprint anda sendiri untuk berkongsi hasil.