Kerjasama
SENI
KECANTIKAN & KESEJAHTERAAN
KRAFTANGAN
BUDAYA & SEJARAH
HIBURAN
ALAM SEKITAR
MAKANAN & MINUMAN
KEJURUTERAAN TERBALIK
SAINS
SUKAN
TEKNOLOGI
BOLEH PAKAI
Iron Retort: a Mercury Flask with an Iron Tube Screwed In (Morfit, 1849)
Charlie

Dicipta oleh

Charlie

7. November 2026DE
2
0
0
0
0

Iron Retort: a Mercury Flask with an Iron Tube Screwed In (Morfit, 1849)

A small iron retort for distilling dry substances that need a high heat. Campbell Morfit (1849) says all iron retorts should be of cast metal, but gives a simpler and cheaper one: an empty mercury flask with an iron gas tube or gun barrel screwed into the top, reaching nearly to the bottom, and another tube bent downwards (his Fig. 205). The retort is heated in a furnace. Flask size, tube sizes and how the side tube is joined are not given. Source: C. Morfit, Chemical and Pharmaceutic Manipulations (1849), pp. 241-242. Picture: Fig. 205.
Pemula
Unknown

Arahan

1

Read Morfit

"A simpler and more economical apparatus is a mercury flask, Fig. 205, with an iron gas tube or gun barrel screwed into the top, and reaching nearly to the bottom, and another tube bent downwards. This arrangement, well fitted for distilling dry substances which require a high heat, may be modified by removing the centre pipe and inserting a screw plug, and thus be made well adapted to the distillation of mercury."
2

Screw in the centre tube

Take an empty mercury flask. Screw an iron tube into the top so that it reaches nearly to the bottom of the flask (Fig. 205). Ours: thick-walled steel pipe with threaded ends stands for the iron gas tube. Its bore and length are not given.

Bahan untuk langkah ini:

Kelalang raksaKelalang raksa1 keping
Paip keluli (berdinding tebal, hujung berulir)Paip keluli (berdinding tebal, hujung berulir)1 centre tube

Alatan diperlukan:

Sepana paipSepana paip
3

Fit the bent side tube

Fit a second tube at the top of the flask, bent so it leads away to the receiver (Fig. 205). Morfit does not say how this tube is joined to the flask or how it is bent (unknown).

Bahan untuk langkah ini:

Paip keluli (berdinding tebal, hujung berulir)Paip keluli (berdinding tebal, hujung berulir)1 side tube
Penyambung tidak diketahuiPenyambung tidak diketahui1 keping

Alatan diperlukan:

Ragum BangkuRagum Bangku
Sepana paipSepana paip
4

History and honest limits

Faraday (Chemical Manipulation, 1830) describes small iron retorts as bottles with an iron tube fitted by a ground joint, used mostly for distilling oxygen, and heated best by a coal or coke fire. Morfit heats all iron retorts in furnaces, greases them when not in use against rust, and keeps them stoppered. For mercury he takes out the centre pipe and puts in a screw plug. Not given: flask size, tube bore and length, how the side tube is joined and bent.

Bahan

3

Alatan Diperlukan

2

CC0 Domain Awam

Blueprint ini dikeluarkan di bawah CC0. Anda bebas menyalin, mengubah, mengedar, dan menggunakan karya ini untuk sebarang tujuan, tanpa meminta kebenaran.

Sokong Pembuat dengan membeli produk melalui Blueprint mereka di mana mereka memperoleh Komisen Pembuat ditetapkan oleh Penjual, atau cipta iterasi baru Blueprint ini dan sertakan ia sebagai sambungan dalam Blueprint anda sendiri untuk berkongsi hasil.

Perbincangan

(0)

Log masuk untuk menyertai perbincangan

Memuatkan komen...