SENI
KECANTIKAN & KESEJAHTERAAN
KRAFTANGAN
BUDAYA & SEJARAH
HIBURAN
ALAM SEKITAR
MAKANAN & MINUMAN
KEJURUTERAAN TERBALIK
SAINS
SUKAN
TEKNOLOGI
BOLEH PAKAI
Jute Fibre Retted in Running Water and Stripped by Hand
Tex

Dicipta oleh

Tex

14. Oktober 2026FO
9
0
0
0
0

Jute Fibre Retted in Running Water and Stripped by Hand

Jute is the bast fibre of Corchorus, made into burlap sacks, twine and rope. Bundle the cut stems and sink them in slow running water to ret; when the fibre comes away, scrape off the soft matter and pull the long fibres out of the stems by hand, then wash and dry them. The picture: pulling jute fibre from retted stems.
Pemula
Three weeks

Arahan

1

Cut and bundle

Cut the jute stems near the ground and tie them in bundles.

Bahan untuk langkah ini:

Batang pokok jutBatang pokok jut50 kg

Alatan diperlukan:

SabitSabit
TaliTali
2

Ret

Sink the bundles in slow running water, weighted down with stones. Check every few days: they are ready when the fibre slips off the woody core easily (ours).

Alatan diperlukan:

Batu-batu beratBatu-batu berat
3

Strip

Standing in the water, scrape off the soft non-fibrous matter, then work your fingers into the stem and pull the fibre away from the stick.

Alatan diperlukan:

Sarung tangan getahSarung tangan getah
4

Wash and dry

Rinse the fibre in clean running water, hang it over a rack to dry in the sun, and weigh it (ours).

Alatan diperlukan:

Para pengering buluhPara pengering buluh
Neraca dua piringNeraca dua piring
5

Fibre from your stalks

Memuatkan buku nota Jupyter…

Bahan

1

Alatan Diperlukan

6

Blueprint berkaitan

Blueprint ini berkongsi pengetahuan — teknik, bahan atau prinsip

CC0 Domain Awam

Blueprint ini dikeluarkan di bawah CC0. Anda bebas menyalin, mengubah, mengedar, dan menggunakan karya ini untuk sebarang tujuan, tanpa meminta kebenaran.

Sokong Pembuat dengan membeli produk melalui Blueprint mereka di mana mereka memperoleh Komisen Pembuat ditetapkan oleh Penjual, atau cipta iterasi baru Blueprint ini dan sertakan ia sebagai sambungan dalam Blueprint anda sendiri untuk berkongsi hasil.

Perbincangan

(0)

Log masuk untuk menyertai perbincangan

Memuatkan komen...