SENI
KECANTIKAN & KESEJAHTERAAN
KRAFTANGAN
BUDAYA & SEJARAH
HIBURAN
ALAM SEKITAR
MAKANAN & MINUMAN
KEJURUTERAAN TERBALIK
SAINS
SUKAN
TEKNOLOGI
BOLEH PAKAI
Leather-Hard Red Clay Vessel: Thrown to a Drawing, Left Overnight to Firm, Binns 1910
A pot ready for painting or turning is thrown on the wheel, then left to firm up overnight: not dry, but 'leather hard', stiff enough to handle and still easy to cut with a knife. Binns (The Potter's Craft, 1910) throws to a drawing, checking each diameter with calipers and the height with a stick.
The picture: throwing a jar, plates X and XI of Binns, The Potter's Craft (1910, public domain).
Pertengahan
2 days
Arahan
1
1
Draw it and set the gauges
Draw it and set the gauges
Draw the jar exactly to size. Take the diameters of base, body and top off the drawing with calipers, and cut a stick to the height.
Alatan diperlukan:
Angkup
Pembaris2
2
Throw a cylinder
Throw a cylinder
Wet the bat and set it on the wheel. With wet hands, centre the clay and draw it up into a cylinder, taller than the drawing: the clay sinks as you shape it.
Bahan untuk langkah ini:
Tanah liat terakota1.5 kgAlatan diperlukan:
Roda tukang tembikar
Cakera pelempar
Air
Span3
3
Shape to measure
Shape to measure
Press the bottom in to its size, swell the body to its size, then take in the top and bring the height to the stick. Cut off any clay above the height with a pointed knife and round the edge.
Alatan diperlukan:
Roda tukang tembikarAngkup
Pisau4
4
Leave it to firm overnight
Leave it to firm overnight
Set it aside on its bat in a cool place. Do not let it dry. Thrown one day, it is leather hard by the next morning: no longer flexible, safe to handle, and easy to cut with a knife.
Alatan diperlukan:
Cakera pelemparBahan
1- 1.5 kgPemegang Tempat
Blueprint ini membuat
Blueprint berkaitan
Blueprint ini berkongsi pengetahuan — teknik, bahan atau prinsip
CC0 Domain Awam
Blueprint ini dikeluarkan di bawah CC0. Anda bebas menyalin, mengubah, mengedar, dan menggunakan karya ini untuk sebarang tujuan, tanpa meminta kebenaran.
Sokong Pembuat dengan membeli produk melalui Blueprint mereka di mana mereka memperoleh Komisen Pembuat ditetapkan oleh Penjual, atau cipta iterasi baru Blueprint ini dan sertakan ia sebagai sambungan dalam Blueprint anda sendiri untuk berkongsi hasil.