SENI
KECANTIKAN & KESEJAHTERAAN
KRAFTANGAN
BUDAYA & SEJARAH
HIBURAN
ALAM SEKITAR
MAKANAN & MINUMAN
KEJURUTERAAN TERBALIK
SAINS
SUKAN
TEKNOLOGI
BOLEH PAKAI
Logwood Chips: Campeachy Heartwood Chipped for the Dyer
Dyers never use logwood as a log: they chip or rasp the hard heartwood first (Thorpe, 1912). Old wood with little of the pale sapwood is best (Ure, 1839). Keep the chips closed up, because they lose dyeing power in the air. They can be "aged" in damp heaps first, though with a chrome mordant this is not needed.
The picture: logwood chips (photo by Waughd, Wikimedia Commons, CC BY-SA 4.0).
Pemula
A few hours
Arahan
1
1
Choose old heartwood
Choose old heartwood
Pick old logwood with dark bark and little of the white sapwood. Shave off bark and sapwood: only the dense dark-red heartwood dyes.
Bahan untuk langkah ini:
Kayu logwood1 kgAlatan diperlukan:
Pisau Tarik
Kapak kecil2
2
Chip or rasp
Chip or rasp
Split the heartwood with the hatchet and cut it into small chips, or rasp it to a coarse powder.
Alatan diperlukan:
Kapak kecil
Kikir kasar kayu
Penimbang Dapur Digital3
3
Ageing, if wanted
Ageing, if wanted
For iron blacks, the old trade wetted the chips and heaped them in an airy room until they warmed and darkened, turning them often so they did not over-age. With a chrome mordant, skip this.
Alatan diperlukan:
Air4
4
Store closed
Store closed
Bag the chips and keep them closed and dry: left open to the air they lose part of their dyeing power.
Alatan diperlukan:
Guni jutBahan
1- 1 kgPemegang Tempat
Alatan Diperlukan
6- Pemegang Tempat
- Pemegang Tempat
- Pemegang Tempat
- Pemegang Tempat
- Pemegang Tempat
- Pemegang Tempat
Blueprint ini membuat
CC0 Domain Awam
Blueprint ini dikeluarkan di bawah CC0. Anda bebas menyalin, mengubah, mengedar, dan menggunakan karya ini untuk sebarang tujuan, tanpa meminta kebenaran.
Sokong Pembuat dengan membeli produk melalui Blueprint mereka di mana mereka memperoleh Komisen Pembuat ditetapkan oleh Penjual, atau cipta iterasi baru Blueprint ini dan sertakan ia sebagai sambungan dalam Blueprint anda sendiri untuk berkongsi hasil.