SENI
KECANTIKAN & KESEJAHTERAAN
KRAFTANGAN
BUDAYA & SEJARAH
HIBURAN
ALAM SEKITAR
MAKANAN & MINUMAN
KEJURUTERAAN TERBALIK
SAINS
SUKAN
TEKNOLOGI
BOLEH PAKAI
Magnifying Glass from a Hand-Ground Lens
Penny

Dicipta oleh

Penny

11. Oktober 2026DK
35
0
0
0
0

Magnifying Glass from a Hand-Ground Lens

A magnifying glass is a convex lens in a frame with a handle. A typical one has a focal length of 25 cm, an optical power of 4 dioptres, and is sold as "2×": its magnifying power is 0.25 m × 4 + 1 = 2 for an eye whose near point is 25 cm. Here the lens is ground plano-convex from crown glass (refractive index about 1.52). For a plano-convex lens the focal length is R / (n − 1), so a 25 cm focal length needs a curve of radius about 13 cm. The lens is then set in a turned wooden ring with a handle; those sizes are ours.
Lanjutan
2–3 days

Arahan

1

Grind the lens

Following the lens-grinding blueprint, grind one face of a glass disc to a spherical curve of about 13 cm radius, working down through the grits, then polish it clear with cerium oxide on a pitch lap. Leave the other face flat.

Bahan untuk langkah ini:

Kepingan kacaKepingan kaca1 keping
Gam Damar PainGam Damar Pain100 g

Alatan diperlukan:

PembarisPembaris
Grit silikon karbidaGrit silikon karbida
Serbuk penggilap serium oksidaSerbuk penggilap serium oksida
2

Check the focus

Hold the lens in sunlight and move a card behind it until the spot is smallest; the distance from lens to card is the focal length and should be close to 25 cm. Do not look at the Sun through it.

Alatan diperlukan:

PembarisPembaris
3

Turn the frame

Turn a ring from a hardwood blank with a groove on the inside just wider than the lens edge, and part it off.

Bahan untuk langkah ini:

Blok Kayu KerasBlok Kayu Keras1 keping

Alatan diperlukan:

Mesin pelarik kayuMesin pelarik kayu
Pahat LengkungPahat Lengkung
Pahat pemotong pelarikPahat pemotong pelarik
4

Turn the handle

Turn a handle from a hardwood dowel and fix it into a hole drilled in the ring.

Bahan untuk langkah ini:

Pasak kayu kerasPasak kayu keras1 keping
Epoksi dua komponenEpoksi dua komponen5 ml

Alatan diperlukan:

Mesin pelarik kayuMesin pelarik kayu
5

Set the lens

Saw the ring through at the handle, spring the lens into the groove, glue the cut closed and wax the wood.

Bahan untuk langkah ini:

Lilin LebahLilin Lebah10 g

Bahan

6

Alatan Diperlukan

6

Blueprint berkaitan

Blueprint ini berkongsi pengetahuan — teknik, bahan atau prinsip

CC0 Domain Awam

Blueprint ini dikeluarkan di bawah CC0. Anda bebas menyalin, mengubah, mengedar, dan menggunakan karya ini untuk sebarang tujuan, tanpa meminta kebenaran.

Sokong Pembuat dengan membeli produk melalui Blueprint mereka di mana mereka memperoleh Komisen Pembuat ditetapkan oleh Penjual, atau cipta iterasi baru Blueprint ini dan sertakan ia sebagai sambungan dalam Blueprint anda sendiri untuk berkongsi hasil.

Perbincangan

(0)

Log masuk untuk menyertai perbincangan

Memuatkan komen...