SENI
KECANTIKAN & KESEJAHTERAAN
KRAFTANGAN
BUDAYA & SEJARAH
HIBURAN
ALAM SEKITAR
MAKANAN & MINUMAN
KEJURUTERAAN TERBALIK
SAINS
SUKAN
TEKNOLOGI
BOLEH PAKAI
Nichrome Wire: Nickel and Chromium Fused, Drawn and Annealed
Forge

Dicipta oleh

Forge

18. Oktober 2026NO
4
0
0
0
0

Nichrome Wire: Nickel and Chromium Fused, Drawn and Annealed

Nichrome is the heating wire of toasters and irons. Albert Marsh patented it in 1906: nickel with less than 25 % chromium, drawn into wire and annealed, with about fifty times the resistance of copper and great resistance to oxidation when hot. Iron, he wrote, will not do. Elwood Haynes (1907) fused pure, carbon-free nickel and chromium in a magnesia crucible under an oxyhydrogen flame. White heat: face shield and gloves. The picture: Marsh's patent drawing, a rheostat wound with the alloy (US 811,859).
Lanjutan
3 days

Arahan

1

Weigh 85 nickel to 15 chromium

Cut 85 g of nickel sheet into small pieces and weigh 15 g of chromium: Marsh's own example. Both must be pure and free of carbon.

Bahan untuk langkah ini:

Kepingan nikelKepingan nikel85 g
Logam KromiumLogam Kromium15 g

Alatan diperlukan:

Sepit pemotong logamSepit pemotong logam
Neraca dua piringNeraca dua piring
2

Fuse under the oxyhydrogen flame

Put the metals in a magnesia crucible, set it in a furnace lined with magnesia, and heat it with the oxyhydrogen blowpipe until both have melted together.

Alatan diperlukan:

Krusibel MagnesiaKrusibel Magnesia
Magnesium oksidaMagnesium oksida
Paip Tiup OksihidrogenPaip Tiup Oksihidrogen
Penyepit Mangkuk PijarPenyepit Mangkuk Pijar
Perisai MukaPerisai Muka
Sarung Tangan KulitSarung Tangan Kulit
3

Cast a rod

Pour the alloy into a narrow mould to get a rod that will start in the largest hole of the drawplate.

Alatan diperlukan:

Acuan jongkongAcuan jongkong
Penyepit Mangkuk PijarPenyepit Mangkuk Pijar
Perisai MukaPerisai Muka
Sarung Tangan KulitSarung Tangan Kulit
4

Draw and anneal

Draw the rod down through the drawplate one hole at a time, as in the drawplate blueprint, and anneal it in the furnace whenever it gets hard. Marsh gives no annealing temperature. Stop at 0.41 mm (0.016 in).

Alatan diperlukan:

Plat tarik keluliPlat tarik keluli
Playar tarikPlayar tarik
Pelincir tarik dawaiPelincir tarik dawai
Relau ArangRelau Arang
MikrometerMikrometer
Sarung Tangan KulitSarung Tangan Kulit
5

Check the resistance

Measure one metre with the multimeter. Marsh's 15 % wire of this size measured about 2.3 ohms per foot, which is 7.5 ohms per metre.

Alatan diperlukan:

MultimeterMultimeter

Bahan

2

Alatan Diperlukan

15

Blueprint berkaitan

Blueprint ini berkongsi pengetahuan — teknik, bahan atau prinsip

CC0 Domain Awam

Blueprint ini dikeluarkan di bawah CC0. Anda bebas menyalin, mengubah, mengedar, dan menggunakan karya ini untuk sebarang tujuan, tanpa meminta kebenaran.

Sokong Pembuat dengan membeli produk melalui Blueprint mereka di mana mereka memperoleh Komisen Pembuat ditetapkan oleh Penjual, atau cipta iterasi baru Blueprint ini dan sertakan ia sebagai sambungan dalam Blueprint anda sendiri untuk berkongsi hasil.

Perbincangan

(0)

Log masuk untuk menyertai perbincangan

Memuatkan komen...